- ceph-users - lists.ceph.io

modifying "osd_memory_target"
by Amudhan P 29 Aug '19

29 Aug '19

Hi, How do i change "osd_memory_target" in ceph command line. regards Amudhan

2 1

How to customize object size
by tapas＠wolk.com 29 Aug '19

29 Aug '19

Hi, I am new to ceph ... i am trying to increase object file size .. i can upload file size upto 128MB .. how can i upload more than 128MB file . i can upload file using this rados --pool z10 put testfile-128M.txt testfile-128M.txt Thats ok when the file size is upto 128MB But its not ok when the file size is >128MB Got this error error putting z13/testfile-129MB.txt: (27) File too large Please help Tapas Jana

2 1

"ceph-users" mailing list!
by Tapas Jana 29 Aug '19

29 Aug '19

tapas@wolkcom

1 0

Ceph Ansible - - name: set grafana_server_addr fact - ipv4
by Lee Norvall 29 Aug '19

29 Aug '19

Hi Ceph: nautilus (14.2.2) NFS-Ganesha v 2.8 ceph-ansible stable 4.0 << git checkout 28th Aug CentOS 7 I am trying to do a fresh installation using Ceph Ansible and I am getting the following error when running the playbook. I have not enabled or config dashboard/grafana/prometheus yet. fatal: [stor1]: FAILED! => msg: |- The task includes an option with an undefined variable. The error was: No first item, sequence was empty. The error appears to be in '/usr/share/ceph-ansible/roles/ceph-facts/tasks/facts.yml': line 314, column 3, but may be elsewhere in the file depending on the exact syntax problem. The offending line appears to be: - name: set grafana_server_addr fact - ipv4 ^ here If I remove [grafana-server] from the /etc/ansible/hosts file I get fatal: [stor1]: FAILED! => changed=false msg: you must add a [grafana-server] group and add at least one node. Any idea what might be causing this?

3 2

Re: FileStore OSD, journal direct symlinked, permission troubles.
by Marco Gaiarin 29 Aug '19

29 Aug '19

Mandi! Alwin Antreich In chel di` si favelave... > > There's something i can do? Thanks. > Did you go through our upgrade guide(s)? Sure! > See the link [0] below, for the > permission changes. They are needed when an upgrade from Hammer to Jewel > is done. Sure! The problem arise in the 'Set partition type' section, because: root@deadpool:~# for l in $(readlink -f /var/lib/ceph/osd/ceph-*/journal); do echo $l; blkid -o udev -p $l; echo ""; done /dev/sda5 ID_PART_ENTRY_SCHEME=dos ID_PART_ENTRY_UUID=9c277a97-05 ID_PART_ENTRY_TYPE=0xfd ID_PART_ENTRY_NUMBER=5 ID_PART_ENTRY_OFFSET=546877440 ID_PART_ENTRY_SIZE=97654784 ID_PART_ENTRY_DISK=8:0 /dev/sda6 ID_PART_ENTRY_SCHEME=dos ID_PART_ENTRY_UUID=9c277a97-06 ID_PART_ENTRY_TYPE=0xfd ID_PART_ENTRY_NUMBER=6 ID_PART_ENTRY_OFFSET=644534272 ID_PART_ENTRY_SIZE=97654784 ID_PART_ENTRY_DISK=8:0 /dev/sdb7 ID_PART_ENTRY_SCHEME=dos ID_PART_ENTRY_UUID=802474ca-07 ID_PART_ENTRY_TYPE=0xfd ID_PART_ENTRY_NUMBER=7 ID_PART_ENTRY_OFFSET=742191104 ID_PART_ENTRY_SIZE=97654784 ID_PART_ENTRY_DISK=8:16 /dev/sdb8 ID_PART_ENTRY_SCHEME=dos ID_PART_ENTRY_UUID=802474ca-08 ID_PART_ENTRY_TYPE=0xfd ID_PART_ENTRY_NUMBER=8 ID_PART_ENTRY_OFFSET=839847936 ID_PART_ENTRY_SIZE=97853440 ID_PART_ENTRY_DISK=8:16 As stated, partitions are 'DOS'... -- dott. Marco Gaiarin GNUPG Key ID: 240A3D66 Associazione ``La Nostra Famiglia'' http://www.lanostrafamiglia.it/ Polo FVG - Via della Bontà, 7 - 33078 - San Vito al Tagliamento (PN) marco.gaiarin(at)lanostrafamiglia.it t +39-0434-842711 f +39-0434-842797 Dona il 5 PER MILLE a LA NOSTRA FAMIGLIA! http://www.lanostrafamiglia.it/index.php/it/sostienici/5x1000 (cf 00307430132, categoria ONLUS oppure RICERCA SANITARIA)

2 2

Re: FileStore OSD, journal direct symlinked, permission troubles.
by Alwin Antreich 29 Aug '19

29 Aug '19

Hello Marco, On Thu, Aug 29, 2019 at 12:55:56PM +0200, Marco Gaiarin wrote: > > I've just finished a double upgrade on my ceph (PVE-based) from hammer > to jewel and from jewel to luminous. > > All went well, apart that... OSD does not restart automatically, > because permission troubles on the journal: > > Aug 28 14:41:55 capitanmarvel ceph-osd[6645]: starting osd.2 at - osd_data /var/lib/ceph/osd/ceph-2 /var/lib/ceph/osd/ceph-2/journal > Aug 28 14:41:55 capitanmarvel ceph-osd[6645]: 2019-08-28 14:41:55.449886 7fa505a43e00 -1 filestore(/var/lib/ceph/osd/ceph-2) mount(1822): failed to open journal /var/lib/ceph/osd/ceph-2/journal: (13) Permission denied > Aug 28 14:41:55 capitanmarvel ceph-osd[6645]: 2019-08-28 14:41:55.453524 7fa505a43e00 -1 osd.2 0 OSD:init: unable to mount object store > Aug 28 14:41:55 capitanmarvel ceph-osd[6645]: 2019-08-28 14:41:55.453535 7fa505a43e00 -1 #033[0;31m ** ERROR: osd init failed: (13) Permission denied#033[0m > > > A little fast rewind: when i've setup the cluster i've used some 'old' > servers, using a couple of SSD disks as SO and as journal. > Because servers was old, i was forced to partition the boot disk in > DOS, not GPT mode. > > While creating the OSD, i've received some warnings: > > WARNING:ceph-disk:Journal /dev/sdaX was not prepared with ceph-disk. Symlinking directly. > > > Looking at the cluster now, seems to me that osd init scripts try to > idetify journal based on GPT partition label/info, and clearly fail. > > > Not that if i do, on servers that hold OSD: > > for l in $(readlink -f /var/lib/ceph/osd/ceph-*/journal); do chown ceph: $l; done > > OSD start flawlessy. > > > There's something i can do? Thanks. Did you go through our upgrade guide(s)? See the link [0] below, for the permission changes. They are needed when an upgrade from Hammer to Jewel is done. On the wiki you can also find the upgrade guides for PVE 5.x -> 6.x and Luminous -> Nautilus. -- Cheers, Alwin [0] https://pve.proxmox.com/wiki/Ceph_Hammer_to_Jewel#Set_permission

1 0

pg_autoscale HEALTH_WARN
by James Dingwall 29 Aug '19

29 Aug '19

Hi, I'm running a small nautilus cluster (14.2.2) which was recently upgraded from mimic (13.2.6). After the upgrade I enabled the pg_autoscaler which resulted in most of the pools having their pg count changed. All the remapping has completed but the cluster is still reporting a HEALTH_WARN. I have adjusted the target ratios such that sum < 1.0 but this didn't help. What else can I look at? Thanks, James # ceph -s cluster: id: ... health: HEALTH_WARN 1 subtrees have overcommitted pool target_size_bytes 1 subtrees have overcommitted pool target_size_ratio services: mon: 3 daemons, quorum ceph-00,ceph-01,ceph-02 (age 3d) mgr: ceph-01(active, since 6d), standbys: ceph-02, ceph-00 osd: 32 osds: 32 up (since 2d), 32 in (since 2d) rgw: 1 daemon active (rgw-00) data: pools: 14 pools, 1512 pgs objects: 4.17M objects, 16 TiB usage: 47 TiB used, 69 TiB / 116 TiB avail pgs: 1510 active+clean 2 active+clean+scrubbing+deep # ceph osd pool autoscale-status (this might wrap horribly...): POOL SIZE TARGET SIZE RATE RAW CAPACITY RATIO TARGET RATIO BIAS PG_NUM NEW PG_NUM AUTOSCALE loc.rgw.buckets.index 0 3.0 116.1T 0.0000 1.0 4 on vms1 5318G 3.0 116.1T 0.1341 0.2000 1.0 256 on vms2 3419G 3.0 116.1T 0.0862 0.0200 1.0 64 on .rgw.root 3648k 3.0 116.1T 0.0000 1.0 4 on default.rgw.meta 384.0k 3.0 116.1T 0.0000 1.0 4 on lov.rgw.log 384.0k 3.0 116.1T 0.0000 1.0 4 on vms3 35799G 3.0 116.1T 0.9028 0.6000 1.0 1024 on default.rgw.control 0 3.0 116.1T 0.0000 1.0 4 on loc.rgw.meta 768.5k 3.0 116.1T 0.0000 1.0 4 on vms4 2306G 3.0 116.1T 0.0582 0.1000 1.0 128 on loc.rgw.buckets.non-ec 200.4k 3.0 116.1T 0.0000 1.0 4 on loc.rgw.buckets.data 56390M 3.0 116.1T 0.0014 1.0 4 on loc.rgw.control 0 3.0 116.1T 0.0000 1.0 4 on default.rgw.log 0 3.0 116.1T 0.0000 1.0 4 on Zynstra is a private limited company registered in England and Wales (registered number 07864369). Our registered office and Headquarters are at The Innovation Centre, Broad Quay, Bath, BA1 1UD. This email, its contents and any attachments are confidential. If you have received this message in error please delete it from your system and advise the sender immediately.

1 0

the ceph rbd read dd with fio performance diffrent so huge?
by linghucongsong 28 Aug '19

28 Aug '19

The performance with the dd and fio diffrent is so huge? I have 25 OSDS with 8TB hdd. with dd I only get 410KB/s read perfomance,but with fio I get 991.23MB/s read perfomance. like below: Thanks in advance! root@Server-d5754749-cded-4964-8129-ba1accbe86b3:~# time dd of=/dev/zero if=/mnt/testw.dbf bs=4k count=10000 iflag=direct 10000+0 records in 10000+0 records out 40960000 bytes (41 MB, 39 MiB) copied, 99.9445 s, 410 kB/s real 1m39.950s user 0m0.040s sys 0m0.292s root@Server-d5754749-cded-4964-8129-ba1accbe86b3:~# fio --filename=/mnt/test1 -direct=1 -iodepth 1 -thread -rw=read -ioengine=libaio -bs=4k -size=1G -numjobs=30 -runtime=10 -group_reporting -name=mytest mytest: (g=0): rw=read, bs=4K-4K/4K-4K/4K-4K, ioengine=libaio, iodepth=1 ... fio-2.2.10 Starting 30 threads Jobs: 30 (f=30): [R(30)] [100.0% done] [1149MB/0KB/0KB /s] [294K/0/0 iops] [eta 00m:00s] mytest: (groupid=0, jobs=30): err= 0: pid=5261: Tue Aug 27 13:37:28 2019 read : io=9915.2MB, bw=991.23MB/s, iops=253752, runt= 10003msec slat (usec): min=2, max=200020, avg=39.10, stdev=1454.14 clat (usec): min=1, max=160019, avg=38.57, stdev=1006.99 lat (usec): min=4, max=200022, avg=87.37, stdev=1910.99 clat percentiles (usec): | 1.00th=[ 1], 5.00th=[ 1], 10.00th=[ 1], 20.00th=[ 1], | 30.00th=[ 1], 40.00th=[ 1], 50.00th=[ 1], 60.00th=[ 1], | 70.00th=[ 1], 80.00th=[ 2], 90.00th=[ 2], 95.00th=[ 2], | 99.00th=[ 612], 99.50th=[ 684], 99.90th=[ 780], 99.95th=[ 1020], | 99.99th=[56064] bw (KB /s): min= 7168, max=46680, per=3.30%, avg=33460.79, stdev=12024.35 lat (usec) : 2=73.62%, 4=22.38%, 10=0.05%, 20=0.03%, 50=0.01% lat (usec) : 100=0.01%, 250=0.03%, 500=1.93%, 750=1.75%, 1000=0.14% lat (msec) : 2=0.01%, 4=0.01%, 10=0.01%, 20=0.01%, 50=0.01% lat (msec) : 100=0.03%, 250=0.01% cpu : usr=1.83%, sys=4.30%, ctx=104743, majf=0, minf=59 IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0% submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% issued : total=r=2538284/w=0/d=0, short=r=0/w=0/d=0, drop=r=0/w=0/d=0 latency : target=0, window=0, percentile=100.00%, depth=1 Run status group 0 (all jobs): READ: io=9915.2MB, aggrb=991.23MB/s, minb=991.23MB/s, maxb=991.23MB/s, mint=10003msec, maxt=10003msec Disk stats (read/write): vdb: ios=98460/0, merge=0/0, ticks=48840/0, in_queue=49144, util=17.28%

3 3

Upgrade procedure on Ubuntu Bionic with stock packages
by Mark Schouten 28 Aug '19

28 Aug '19

Hi, I have a cluster running on Ubuntu Bionic, with stock Ubuntu Ceph packages. When upgrading, I always try to follow the procedure as documented here: https://docs.ceph.com/docs/master/install/upgrading-ceph/ However, the Ubuntu packages restart all daemons upon upgrade, per node. So if I upgrade the first node, it will restart mon, osds, rgw, and mds'es on that node, even though the rest of the cluster is running the old version. I tried upgrading a single package, to see how that goes, but due to dependencies in dpkg, all other packages are upgraded as well. How should I proceed? Thanks, -- Mark Schouten <mark(a)tuxis.nl> Tuxis, Ede, https://www.tuxis.nl T: +31 318 200208

2 3

3 OSD down and unable to start
by Jordi Blasco 28 Aug '19

28 Aug '19

Hello, I've been facing some issues with a single node ceph cluster (mimic). I know an environment like this shouldn't be in production but the server end up dealing with operational workloads for the last 2 years. Some users detected some issues in cephfs; some files not being accessible and hanging the node while trying to list the content of affected folders. I noticed a heavy memory load on the server. Main memory was consumed by cache as well as quite a reasonable swap. The command "ceph health detail" reported some inactive PGs. Those PGs didn't exist. After rebooting the node, an fsck was run in the 3 affected OSDs. ceph-bluestore-tool fsck --deep yes --path /var/lib/ceph/osd/ceph-1/ Unfortunately, all of them crashed with a core dump and now they don't start anymore. The logs report messages like: 2019-08-28 03:00:12.999 7f21d787c240 4 rocksdb: [/build/ceph-13.2.1/src/rocksdb/db/version_set.cc:3088] Recovering from manifest file: MANIFEST-004059 2019-08-28 03:00:12.999 7f21d787c240 4 rocksdb: [/build/ceph-13.2.1/src/rocksdb/db/db_impl.cc:252] Shutdown: canceling all background work 2019-08-28 03:00:12.999 7f21d787c240 4 rocksdb: [/build/ceph-13.2.1/src/rocksdb/db/db_impl.cc:397] Shutdown complete 2019-08-28 03:00:12.999 7f21d787c240 -1 rocksdb: NotFound: 2019-08-28 03:00:12.999 7f21d787c240 -1 bluestore(/var/lib/ceph/osd/ceph-0) _open_db erroring opening db: 2019-08-28 03:00:12.999 7f21d787c240 1 bluefs umount 2019-08-28 03:00:12.999 7f21d787c240 1 stupidalloc 0x0x5650c5255800 shutdown 2019-08-28 03:00:12.999 7f21d787c240 1 bdev(0x5650c5604a80 /var/lib/ceph/osd/ceph-0/block) close 2019-08-28 03:00:13.247 7f21d787c240 1 bdev(0x5650c5604700 /var/lib/ceph/osd/ceph-0/block) close 2019-08-28 03:00:13.479 7f21d787c240 -1 osd.0 0 OSD:init: unable to mount object store 2019-08-28 03:00:13.479 7f21d787c240 -1 ** ERROR: osd init failed: (5) Input/output error I'm not sure if the fsck has introduced additional damage. After that, I tried to mark unfound as lost with the following commands: ceph pg 4.1e mark_unfound_lost revert ceph pg 9.1d mark_unfound_lost revert ceph pg 13.3 mark_unfound_lost revert ceph pg 13.e mark_unfound_lost revert Currently, since there are 3 OSD down, there are: 316 unclean PGs 76 inactive PGs root@ceph-s01:~# ceph osd tree ID CLASS WEIGHT TYPE NAME STATUS REWEIGHT PRI-AFF -2 0.43599 root ssd -4 0.43599 disktype ssd_disk 12 ssd 0.43599 osd.12 up 1.00000 1.00000 -1 60.03792 root default -5 60.03792 disktype hdd_disk 0 hdd 0 osd.0 down 1.00000 1.00000 1 hdd 5.45799 osd.1 down 0 1.00000 2 hdd 5.45799 osd.2 up 1.00000 1.00000 3 hdd 5.45799 osd.3 up 1.00000 1.00000 4 hdd 5.45799 osd.4 up 1.00000 1.00000 5 hdd 5.45799 osd.5 up 1.00000 1.00000 6 hdd 5.45799 osd.6 up 1.00000 1.00000 7 hdd 5.45799 osd.7 down 0 1.00000 8 hdd 5.45799 osd.8 up 1.00000 1.00000 9 hdd 5.45799 osd.9 up 1.00000 1.00000 10 hdd 5.45799 osd.10 up 1.00000 1.00000 11 hdd 5.45799 osd.11 up 1.00000 1.00000 Running the following command, a MANIFEST file appeared in the folder db/lost. I guess that the repair moved here. # ceph-bluestore-tool bluefs-export --path /var/lib/ceph/osd/ceph-7 --out-dir osd7/ ... db/LOCK db/MANIFEST-000001 db/OPTIONS-018543 db/OPTIONS-018581 db/lost/ db/lost/MANIFEST-018578 Any ideas? Suggestions? Thank you. Regards, Jordi

1 0