On Thu, Aug 29, 2019 at 02:42:42PM +0200, Marco Gaiarin wrote:
Mandi! Alwin Antreich
In chel di` si favelave...
There's something i can do? Thanks.
Did you go through our upgrade guide(s)?
Sure!
See the link [0] below, for the
permission changes. They are needed when an upgrade from Hammer to Jewel
is done.
Sure! The problem arise in the 'Set partition type' section, because:
root@deadpool:~# for l in $(readlink -f /var/lib/ceph/osd/ceph-*/journal); do echo $l;
blkid -o udev -p $l; echo ""; done
/dev/sda5
ID_PART_ENTRY_SCHEME=dos
ID_PART_ENTRY_UUID=9c277a97-05
ID_PART_ENTRY_TYPE=0xfd
ID_PART_ENTRY_NUMBER=5
ID_PART_ENTRY_OFFSET=546877440
ID_PART_ENTRY_SIZE=97654784
ID_PART_ENTRY_DISK=8:0
/dev/sda6
ID_PART_ENTRY_SCHEME=dos
ID_PART_ENTRY_UUID=9c277a97-06
ID_PART_ENTRY_TYPE=0xfd
ID_PART_ENTRY_NUMBER=6
ID_PART_ENTRY_OFFSET=644534272
ID_PART_ENTRY_SIZE=97654784
ID_PART_ENTRY_DISK=8:0
/dev/sdb7
ID_PART_ENTRY_SCHEME=dos
ID_PART_ENTRY_UUID=802474ca-07
ID_PART_ENTRY_TYPE=0xfd
ID_PART_ENTRY_NUMBER=7
ID_PART_ENTRY_OFFSET=742191104
ID_PART_ENTRY_SIZE=97654784
ID_PART_ENTRY_DISK=8:16
/dev/sdb8
ID_PART_ENTRY_SCHEME=dos
ID_PART_ENTRY_UUID=802474ca-08
ID_PART_ENTRY_TYPE=0xfd
ID_PART_ENTRY_NUMBER=8
ID_PART_ENTRY_OFFSET=839847936
ID_PART_ENTRY_SIZE=97853440
ID_PART_ENTRY_DISK=8:16
As stated, partitions are 'DOS'...
Yes, the journal is not linked through
uuid, path, ... . For one, you could
change the link by hand. But this might be not very future proof.
Another possibilty is to convert the MBR to GPT (sgdisk --mbrtogpt) and
give the partition its UID (also sgdisk). Then it could be linked by
its uuid.
Or if you are not in need of filestore OSDs, re-create them as bluestore
ones. AFAICS, Ceph has laid more focus on bluestore and it might be
better to do a conversion sooner than later. (my opinion)
--
Cheers,
Alwin