Hi all,
I just had created a ceph cluster to use cephfs. When i create the a ceph
fs pool i get the filesystem below error.
# ceph osd pool create cephfs_data 128
pool 'cephfs_data' created
# ceph osd pool create cephfs_metadata 128
pool 'cephfs_metadata' created
# ceph fs new cephfs cephfs_metadata cephfs_data
new fs with metadata pool 6 and data pool 5
# ceph -s
cluster:
id: 1c27def45-f0f9-494d-sfke-eb4323432fd
health: HEALTH_ERR
1 filesystem is offline
1 filesystem is online with fewer MDS than max_mds
services:
mon: 2 daemons, quorum ceph-mon01,ceph-mon02
mgr: ceph-adm01(active)
mds: cephfs-0/0/1 up
osd: 12 osds: 12 up, 12 in
data:
pools: 2 pools, 256 pgs
objects: 0 objects, 0 B
usage: 12 GiB used, 588 GiB / 600 GiB avail
pgs: 256 active+clean
but when i check the max_mds for the ceph fs it says 1
# ceph fs get cephfs | grep max_mds
max_mds 1
Let anyone know what am i missing here? Any inputs is much appreciated.
Regards,
Ram
Ceph-explorer..
Hi,
We see that we have 5 'remapped' PGs, but are unclear why/what to do about
it. We shifted some target ratios for the autobalancer and it resulted in
this state. When adjusting ratio, we noticed two OSDs go down, but we just
restarted the container for those OSDs with podman, and they came back up.
Here's status output:
###################
root@ceph01:~# ceph status
INFO:cephadm:Inferring fsid x
INFO:cephadm:Inferring config x
INFO:cephadm:Using recent ceph image docker.io/ceph/ceph:v15
cluster:
id: 41bb9256-c3bf-11ea-85b9-9e07b0435492
health: HEALTH_OK
services:
mon: 5 daemons, quorum ceph01,ceph04,ceph02,ceph03,ceph05 (age 2w)
mgr: ceph03.ytkuyr(active, since 2w), standbys: ceph01.aqkgbl,
ceph02.gcglcg, ceph04.smbdew, ceph05.yropto
osd: 168 osds: 168 up (since 2d), 168 in (since 2d); 5 remapped pgs
data:
pools: 3 pools, 1057 pgs
objects: 18.00M objects, 69 TiB
usage: 119 TiB used, 2.0 PiB / 2.1 PiB avail
pgs: 1056 active+clean
1 active+clean+scrubbing+deep
io:
client: 859 KiB/s rd, 212 MiB/s wr, 644 op/s rd, 391 op/s wr
root@ceph01:~#
###################
When I look at ceph pg dump, I don't see any marked as remapped:
###################
root@ceph01:~# ceph pg dump |grep remapped
INFO:cephadm:Inferring fsid x
INFO:cephadm:Inferring config x
INFO:cephadm:Using recent ceph image docker.io/ceph/ceph:v15
dumped all
root@ceph01:~#
###################
Any idea what might be going on/how to recover? All OSDs are up. Health is
'OK'. This is Ceph 15.2.4 deployed using Cephadm in containers, on Podman
2.0.3.
Hi,
I have a CEPH 15.2.4 running in a docker. How to configure for use a
specific data pool? i try put the follow line in the ceph.conf but the
changes not working. .
[client.myclient]
rbd default data pool = Mydatapool
I need it to configure for erasure pool with cloudstack
Can help me? , where is the ceph conf we i need configure?
Thanks.
--
Untitled Document
Hi,
We are running a ceph cluster on Ubuntu 18.04 machines with ceph 14.2.4.
Our cephfs clients are using the kernel module and we have noticed that
some of them are sometimes (at least once) hanging after an MDS restart.
The only way to resolve this is to unmount and remount the mountpoint,
or reboot the machine if unmounting is not possible.
After some investigation, the problem seems to be that the MDS denies
reconnect attempts from some clients during restart even though the
reconnect interval is not yet reached. In particular, I see the following
log entries. Note that there are supposedly 9 sessions. 9 clients
reconnect (one client has two mountpoints) and then two more clients
reconnect after the MDS already logged "reconnect_done". These two
clients were hanging after the event. The kernel log of one of them is
shown below too.
Running `ceph tell mds.0 client ls` after the clients have been
rebooted/remounted also shows 11 clients instead of 9.
Do you have any ideas what is wrong here and how it could be fixed? I'm
guessing that the issue is that the MDS apparently has an incorrect
session count and stops the reconnect process to soon. Is this indeed a
bug and if so, do you know what is broken?
Regardless, I also think that the kernel should be able to deal with a
denied reconnect and that it should try again later. Yet, even after
10 minutes, the kernel does not attempt to reconnect. Is this a known
issue or maybe fixed in newer kernels? If not, is there a chance to get
this fixed?
Thanks,
Florian
MDS log:
> 2019-09-26 16:08:27.479 7f9fdde99700 1 mds.0.server reconnect_clients -- 9 sessions
> 2019-09-26 16:08:27.479 7f9fdde99700 0 log_channel(cluster) log [DBG] : reconnect by client.24197043 v1:10.1.4.203:0/990008521 after 0
> 2019-09-26 16:08:27.479 7f9fdde99700 0 log_channel(cluster) log [DBG] : reconnect by client.30487144 v1:10.1.4.146:0/483747473 after 0
> 2019-09-26 16:08:27.479 7f9fdde99700 0 log_channel(cluster) log [DBG] : reconnect by client.21019865 v1:10.1.7.22:0/3752632657 after 0
> 2019-09-26 16:08:27.479 7f9fdde99700 0 log_channel(cluster) log [DBG] : reconnect by client.21020717 v1:10.1.7.115:0/2841046616 after 0
> 2019-09-26 16:08:27.479 7f9fdde99700 0 log_channel(cluster) log [DBG] : reconnect by client.24171153 v1:10.1.7.243:0/1127767158 after 0
> 2019-09-26 16:08:27.479 7f9fdde99700 0 log_channel(cluster) log [DBG] : reconnect by client.23978093 v1:10.1.4.71:0/824226283 after 0
> 2019-09-26 16:08:27.479 7f9fdde99700 0 log_channel(cluster) log [DBG] : reconnect by client.24209569 v1:10.1.4.157:0/1271865906 after 0
> 2019-09-26 16:08:27.479 7f9fdde99700 0 log_channel(cluster) log [DBG] : reconnect by client.20190930 v1:10.1.4.240:0/3195698606 after 0
> 2019-09-26 16:08:27.479 7f9fdde99700 0 log_channel(cluster) log [DBG] : reconnect by client.20190912 v1:10.1.4.146:0/852604154 after 0
> 2019-09-26 16:08:27.479 7f9fdde99700 1 mds.0.59 reconnect_done
> 2019-09-26 16:08:27.483 7f9fdde99700 1 mds.0.server no longer in reconnect state, ignoring reconnect, sending close
> 2019-09-26 16:08:27.483 7f9fdde99700 0 log_channel(cluster) log [INF] : denied reconnect attempt (mds is up:reconnect) from client.24167394 v1:10.1.67.49:0/1483641729 after 0.00400002 (allowed interval 45)
> 2019-09-26 16:08:27.483 7f9fe1087700 0 --1- [v2:10.1.4.203:6800/806949107,v1:10.1.4.203:6801/806949107] >> v1:10.1.67.49:0/1483641729 conn(0x55af50053f80 0x55af50140800 :6801 s=OPENED pgs=21 cs=1 l=0).fault server, going to standby
> 2019-09-26 16:08:27.483 7f9fdde99700 1 mds.0.server no longer in reconnect state, ignoring reconnect, sending close
> 2019-09-26 16:08:27.483 7f9fdde99700 0 log_channel(cluster) log [INF] : denied reconnect attempt (mds is up:reconnect) from client.30586072 v1:10.1.67.140:0/3664284158 after 0.00400002 (allowed interval 45)
> 2019-09-26 16:08:27.483 7f9fe1888700 0 --1- [v2:10.1.4.203:6800/806949107,v1:10.1.4.203:6801/806949107] >> v1:10.1.67.140:0/3664284158 conn(0x55af50055600 0x55af50143000 :6801 s=OPENED pgs=8 cs=1 l=0).fault server, going to standby
Hanging client (10.1.67.49) kernel log:
> 2019-09-26T16:08:27.481676+02:00 hostnamefoo kernel: [708596.227148] ceph: mds0 reconnect start
> 2019-09-26T16:08:27.488943+02:00 hostnamefoo kernel: [708596.233145] ceph: mds0 reconnect denied
> 2019-09-26T16:16:17.541041+02:00 hostnamefoo kernel: [709066.287601] libceph: mds0 10.1.4.203:6801 socket closed (con state NEGOTIATING)
> 2019-09-26T16:16:18.068934+02:00 hostnamefoo kernel: [709066.813064] ceph: mds0 rejected session
> 2019-09-26T16:16:18.068955+02:00 hostnamefoo kernel: [709066.814843] ceph: get_quota_realm: ino (10000000008.fffffffffffffffe) null i_snap_realm
Hello
the mgr module diskprediction_local fails under ubuntu 20.04 focal with
python3-sklearn version 0.22.2
Ceph version is 15.2.3
when the module is enabled i get the following error:
File "/usr/share/ceph/mgr/diskprediction_local/module.py", line 112, in
serve
self.predict_all_devices()
File "/usr/share/ceph/mgr/diskprediction_local/module.py", line 279, in
predict_all_devices
result = self._predict_life_expentancy(devInfo['devid'])
File "/usr/share/ceph/mgr/diskprediction_local/module.py", line 222, in
_predict_life_expentancy
predicted_result = obj_predictor.predict(predict_datas)
File "/usr/share/ceph/mgr/diskprediction_local/predictor.py", line 457,
in predict
pred = clf.predict(ordered_data)
File "/usr/lib/python3/dist-packages/sklearn/svm/_base.py", line 585, in
predict
if self.break_ties and self.decision_function_shape == 'ovo':
AttributeError: 'SVC' object has no attribute 'break_ties'
Best Regards
Eric
We're happy to announce the fourth bugfix release in the Octopus series.
In addition to a security fix in RGW, this release brings a range of fixes
across all components. We recommend that all Octopus users upgrade to this
release. For a detailed release notes with links & changelog please
refer to the official blog entry at https://ceph.io/releases/v15-2-4-octopus-released
Notable Changes
---------------
* CVE-2020-10753: rgw: sanitize newlines in s3 CORSConfiguration's ExposeHeader
(William Bowling, Adam Mohammed, Casey Bodley)
* Cephadm: There were a lot of small usability improvements and bug fixes:
* Grafana when deployed by Cephadm now binds to all network interfaces.
* `cephadm check-host` now prints all detected problems at once.
* Cephadm now calls `ceph dashboard set-grafana-api-ssl-verify false`
when generating an SSL certificate for Grafana.
* The Alertmanager is now correctly pointed to the Ceph Dashboard
* `cephadm adopt` now supports adopting an Alertmanager
* `ceph orch ps` now supports filtering by service name
* `ceph orch host ls` now marks hosts as offline, if they are not
accessible.
* Cephadm can now deploy NFS Ganesha services. For example, to deploy NFS with
a service id of mynfs, that will use the RADOS pool nfs-ganesha and namespace
nfs-ns::
ceph orch apply nfs mynfs nfs-ganesha nfs-ns
* Cephadm: `ceph orch ls --export` now returns all service specifications in
yaml representation that is consumable by `ceph orch apply`. In addition,
the commands `orch ps` and `orch ls` now support `--format yaml` and
`--format json-pretty`.
* Cephadm: `ceph orch apply osd` supports a `--preview` flag that prints a preview of
the OSD specification before deploying OSDs. This makes it possible to
verify that the specification is correct, before applying it.
* RGW: The `radosgw-admin` sub-commands dealing with orphans --
`radosgw-admin orphans find`, `radosgw-admin orphans finish`, and
`radosgw-admin orphans list-jobs` -- have been deprecated. They have
not been actively maintained and they store intermediate results on
the cluster, which could fill a nearly-full cluster. They have been
replaced by a tool, currently considered experimental,
`rgw-orphan-list`.
* RBD: The name of the rbd pool object that is used to store
rbd trash purge schedule is changed from "rbd_trash_trash_purge_schedule"
to "rbd_trash_purge_schedule". Users that have already started using
`rbd trash purge schedule` functionality and have per pool or namespace
schedules configured should copy "rbd_trash_trash_purge_schedule"
object to "rbd_trash_purge_schedule" before the upgrade and remove
"rbd_trash_purge_schedule" using the following commands in every RBD
pool and namespace where a trash purge schedule was previously
configured::
rados -p <pool-name> [-N namespace] cp rbd_trash_trash_purge_schedule rbd_trash_purge_schedule
rados -p <pool-name> [-N namespace] rm rbd_trash_trash_purge_schedule
or use any other convenient way to restore the schedule after the
upgrade.
Getting Ceph
------------
* Git at git://github.com/ceph/ceph.git
* Tarball at http://download.ceph.com/tarballs/ceph-14.2.10.tar.gz
* For packages, see http://docs.ceph.com/docs/master/install/get-packages/
* Release git sha1: 7447c15c6ff58d7fce91843b705a268a1917325c
--
David Galloway
Systems Administrator, RDU
Ceph Engineering
IRC: dgalloway
