All, Mark Kogan noticed he was unable to access one of the machines from the RDU lab. This is because we are reusing the same subnets we had in RDU but these subnets were not configured in the original WireGuard client config. You will need to modify your wg0.conf config to say AllowedIPs = 172.21.0.0/20, 172.21.32.0/20, 172.16.48.0/24, 10.20.192.0/20, 10.20.208.0/20, 172.16.50.0/23, 172.16.53.0/25, 172.16.55.0/26, 172.16.56.0/23, 172.16.59.0/25, 172.16.60.0/25 Under the [Peer] section to continue accessing hosts that were in the RDU lab. From: David Galloway <David.Galloway@ibm.com> Date: Friday, March 20, 2026 at 1:18 PM To: David Galloway via Sepia <sepia@ceph.io> Subject: Folio machines are BACK Friends, I am ecstatic to report the folio machines in the Sepia lab are finally back. Feel free to continue using them. If this means you no longer need a “sockeni” machine, please let me know so that we are adequately distributing the workloads across dev boxes. Thanks. In other positive news, most of the braggi Jenkins builders are back and connected to Jenkins as well. They were reconnected the afternoon of the 18th. See the attached graph for a visual of the impact they have had on the Jenkins Queue Wait times. (<1hr wait times compared to 3+ hours) Additionally, the ivan machines and the two mira still part of the LRC are online. We still need the reesi machines that are in another row accessible but then we can bring the old LRC back up. The next highest priority to get online is the officinalis and mako rack. This will, by proxy, get the gibba online as well since they are physically racked next door. Then the reesi, infra, vossi, smithi, and ARM boxes. Thanks for your patience the past few months. -- David Galloway Ceph Engineering Labs – Infrastructure Architect david.galloway@ibm.com IBM