Try
# /usr/bin/radosgw -f --cluster ceph --name client.radosgw.masifgw03
--setuser ceph --setgroup ceph --debug_monc 20 --debug_ms 5
On Tue, May 19, 2020 at 12:10 AM Amit Ghadge <amitg.b14(a)gmail.com> wrote:
Hi @Brad Hubbard , please ignore my last mail, I try to run radosgw service on host which
has one network interface, after set debug_monc in ceph.conf, it cant print any useful
message,
# /usr/bin/radosgw -f --cluster ceph --name client.radosgw.masifgw03 --setuser ceph
--setgroup ceph
2020-05-18 14:10:04.961 7fb95d397700 -1 monclient(hunting): handle_auth_bad_method server
allowed_methods [2] but i only support [2,1]
failed to fetch mon config (--no-mon-config to skip)
On Mon, May 18, 2020 at 5:58 PM Amit Ghadge <amitg.b14(a)gmail.com> wrote:
>
> Hi @Brad Hubbard , here are the debug output,
>
>
> f6198813780 10 monclient: init
> f6198813780 10 monclient: _reopen_session rank -1
> f6198813780 10 monclient(hunting): picked mon.noname-a-legacy con 0x565176ac6000 addr
v1:10.44.127.153:6789/0
> f6198813780 10 monclient(hunting): picked mon.noname-b-legacy con 0x565176ac6800 addr
v1:10.44.127.154:6789/0
> f6198813780 10 monclient(hunting): picked mon.noname-c con 0x565175f41c00 addr
v2:10.44.127.155:3300/0
> f6198813780 10 monclient(hunting): start opening mon connection
> f6198813780 10 monclient(hunting): _renew_subs
> f6198813780 10 monclient(hunting): authenticate will time out at 2020-05-18
12:29:35.626436
> f6186e6c700 10 monclient(hunting): get_auth_request con 0x565175f41c00 auth_method 0
> f6186e6c700 10 monclient(hunting): get_auth_request method 2 preferred_modes [2,1]
> f6186e6c700 10 monclient(hunting): _init_auth method 2
> f6186e6c700 10 monclient(hunting): handle_auth_reply_more payload 9
> f6186e6c700 10 monclient(hunting): handle_auth_reply_more payload_len 9
> f6186e6c700 10 monclient(hunting): handle_auth_reply_more responding with 36 bytes
> f6185669700 10 monclient(hunting): _init_auth method 2
> f6185669700 10 monclient(hunting): my global_id is 16435
> f6185669700 10 monclient(hunting): _init_auth method 2
> f6185669700 10 monclient(hunting): my global_id is 34179
> f6186e6c700 10 monclient(hunting): handle_auth_bad_method old_auth_method 2 result
(1) Operation not permitted allowed_methods [2]
> f6186e6c700 -1 monclient(hunting): handle_auth_bad_method server allowed_methods [2]
but i only support [2,1]
> f6185669700 10 monclient: _finish_hunting -1
> f6185669700 1 monclient: no mon sessions established
> f6185669700 20 monclient: _un_backoff reopen_interval_multipler now 1
> f6185669700 10 monclient: _finish_auth -1
> f6198813780 10 monclient: shutdown
> f6198813780 20 monclient: shutdown discarding pending message
mon_subscribe({config=0+,monmap=0+}) v3
>
> Thanks,
> AmitG
>
> On Wed, May 13, 2020 at 8:57 PM Amit Ghadge <amitg.b14(a)gmail.com> wrote:
>>
>> Thanks for the reply,
>>
>> I deployed on vm's and it works fine, let me try on physical node.
>>
>> Thanks,
>> AmitG
>>
>>
>> On Fri, 8 May 2020, 02:43 Brad Hubbard, <bhubbard(a)redhat.com> wrote:
>>>
>>> On Fri, May 8, 2020 at 12:34 AM Casey Bodley <cbodley(a)redhat.com>
wrote:
>>> >
>>> > Regarding
https://tracker.ceph.com/issues/45142 reported against
nautilus,
>>> >
>>> > > 2020-04-19 09:05:05.421 7fe2eeea9700 -1 monclient(hunting):
handle_auth_bad_method server allowed_methods [1] but i only support [2,1]
>>> > > failed to fetch mon config (--no-mon-config to skip
>>> >
>>> > I don't understand why this negotiation would fail. Are there any
>>> > known bugs here? Or can anyone explain this?
>>>
>>> I think running the same test with debug_monc => 10 might help us work it
out.
>>>
>>> >
>>> > Thanks,
>>> > Casey
>>> > _______________________________________________
>>> > Dev mailing list -- dev(a)ceph.io
>>> > To unsubscribe send an email to dev-leave(a)ceph.io
>>> >
>>>
>>>
>>> --
>>> Cheers,
>>> Brad
>>> _______________________________________________
>>> Dev mailing list -- dev(a)ceph.io
>>> To unsubscribe send an email to dev-leave(a)ceph.io