RE: Device is not available after zap

I built a new cluster from scratch, everything works fine. Could anyone help to find out what is stuck here? Another issue, devices don't show up after adding a host, could be the same cause. Any details about the workflow would be helpful too, like how mon gets devices when a host is added, is it pushed by something (mgr?) or pulled by mon? Thanks! Tony > -----Original Message----- > From: Tony Liu <tonyliu0592(a)hotmail.com> > Sent: Sunday, February 7, 2021 5:32 PM > To: ceph-users <ceph-users(a)ceph.io> > Subject: [ceph-users] Re: Device is not available after zap > > I checked pvscan, vgscan, lvscan and "ceph-volume lvm list" on the OSD > node, that zapped device doesn't show anywhere. > Anything missing? > > Thanks! > Tony > ________________________________________ > From: Tony Liu <tonyliu0592(a)hotmail.com> > Sent: February 7, 2021 05:27 PM > To: ceph-users > Subject: [ceph-users] Device is not available after zap > > Hi, > > With v15.2.8, after zap a device on OSD node, it's still not available. > The reason is "locked, LVM detected". If I reboot the whole OSD node, > then the device will be available. There must be something no being > cleaned up. Any clues? > > Thanks! > Tony > _______________________________________________ > ceph-users mailing list -- ceph-users(a)ceph.io To unsubscribe send an > email to ceph-users-leave(a)ceph.io > _______________________________________________ > ceph-users mailing list -- ceph-users(a)ceph.io To unsubscribe send an > email to ceph-users-leave(a)ceph.io