12 Feb
2020
12 Feb
'20
7:18 p.m.
I have a 3 hosts, 10 4TB HDDs per host ceph storage set up. I deined a 3 replica rbd pool
and some images and presented them to a Vmware host via ISCSI, but the write performance
is so bad the I managed to freeze a VM doing a big rsync to a datastore inside ceph and
had to reboot it's host (seems I've filled up Vmware's ISCSI queue).
Right now I'm getting write latencies from 20ms to 80 ms (per OSD) and sometimes
peaking at 600 ms (per OSD).
Client throughput is giving me around 4 MBs.
Using a 4MB stripe 1 image I got 1.955..359 B/s inside the VM.
On a 1MB stripe 1 I got 2.323.206 B/s inside the same VM.
I think the performance is way too slow, much more than should be and that I can fix this
by correcting some configuration.
Any advices?
--
Salsa
Sent with [ProtonMail](https://protonmail.com) Secure Email.
12 Feb
12 Feb
9:45 p.m.
I have a 3 hosts, 10 4TB HDDs per host ceph storage set up. I deined a 3 replica rbd pool
and some images and presented them to a Vmware host via ISCSI, but the write performance
is so bad the I managed to freeze a VM doing a big rsync to a datastore inside ceph and
had to reboot it's host (seems I've filled up Vmware's ISCSI queue).
Right now I'm getting write latencies from 20ms to 80 ms (per OSD) and sometimes
peaking at 600 ms (per OSD).
Client throughput is giving me around 4 MBs.
Using a 4MB stripe 1 image I got 1.955..359 B/s inside the VM.
On a 1MB stripe 1 I got 2.323.206 B/s inside the same VM.
I think the performance is way too slow, much more than should be and that I can fix this
by correcting some configuration.
Any advices?
--
Salsa
29 May
29 May
5:29 p.m.
What are the specs of your nodes? And what specific harddisks are you using?
On Fri, May 29, 2020, 18:41 Salsa <salsa(a)protonmail.com> wrote:
I have a 3 hosts, 10 4TB HDDs per host ceph storage
set up. I deined a 3
replica rbd pool and some images and presented them to a Vmware host via
ISCSI, but the write performance is so bad the I managed to freeze a VM
doing a big rsync to a datastore inside ceph and had to reboot it's host
(seems I've filled up Vmware's ISCSI queue).
Right now I'm getting write latencies from 20ms to 80 ms (per OSD) and
sometimes peaking at 600 ms (per OSD).
Client throughput is giving me around 4 MBs.
Using a 4MB stripe 1 image I got 1.955..359 B/s inside the VM.
On a 1MB stripe 1 I got 2.323.206 B/s inside the same VM.
I think the performance is way too slow, much more than should be and that
I can fix this by correcting some configuration.
Any advices?
--
Salsa
Sent with [ProtonMail](https://protonmail.com) Secure Email.
_______________________________________________
ceph-users mailing list -- ceph-users(a)ceph.io
To unsubscribe send an email to ceph-users-leave(a)ceph.io
1435
days inactive
1542
days old
2 comments
2 participants
participants (2)
-
Hans van den Bogert -
Salsa