27 May
2021
27 May
'21
6:24 p.m.
Hello,
I have by mistake re-installed the OS of an OSD node of my Octopus cluster (managed by
cephadm). Luckily the OSD data is on a separate disk and did not get affected by the
re-install.
Now I have the following state:
health: HEALTH_WARN
1 stray daemon(s) not managed by cephadm
1 osds down
1 host (1 osds) down
To fix that I tried to run:
# ceph orch daemon add osd ceph1f:/dev/sda
Created no osd(s) on host ceph1f; already created?
That did not work, so I tried:
# ceph cephadm osd activate ceph1f
no valid command found; 10 closest matches:
...
Error EINVAL: invalid command
Did not work either. So I wanted to ask how can I "adopt" back an OSD disk to my
cluster?
Thanks for your help.
Regards,
Mabi
27 May
27 May
7:13 p.m.
Hi,
I posted a link to the docs [1], [2] just yesterday ;-)
You should see the respective OSD in the output of 'cephadm
ceph-volume lvm list' on that node. You should then be able to get it
back to cephadm with
cephadm deploy --name osd.x
But I haven't tried this yet myself, so please report back if that
works for you.
Regards,
Eugen
[1] https://tracker.ceph.com/issues/49159
[2] https://tracker.ceph.com/issues/46691
Zitat von mabi <mabi(a)protonmail.ch>ch>:
Hello,
I have by mistake re-installed the OS of an OSD node of my Octopus
cluster (managed by cephadm). Luckily the OSD data is on a separate
disk and did not get affected by the re-install.
Now I have the following state:
health: HEALTH_WARN
1 stray daemon(s) not managed by cephadm
1 osds down
1 host (1 osds) down
To fix that I tried to run:
# ceph orch daemon add osd ceph1f:/dev/sda
Created no osd(s) on host ceph1f; already created?
That did not work, so I tried:
# ceph cephadm osd activate ceph1f
no valid command found; 10 closest matches:
...
Error EINVAL: invalid command
Did not work either. So I wanted to ask how can I "adopt" back an
OSD disk to my cluster?
Thanks for your help.
Regards,
Mabi
_______________________________________________
ceph-users mailing list -- ceph-users(a)ceph.io
To unsubscribe send an email to ceph-users-leave(a)ceph.io
7:26 p.m.
Hi Eugen,
What a good coincidence ;-)
So I ran "cephadm ceph-volume lvm list" on the OSD node which I re-instaled and
it saw my osd.2 OSD. So far so good, but the following suggested command does not work as
you can see below:
ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
91a86f20-8083-40b1-8bf1-fe35fac3d677
Deploy daemon osd.2 ...
Traceback (most recent call last):
File "/usr/local/sbin/cephadm", line 6223, in <module>
r = args.func()
File "/usr/local/sbin/cephadm", line 1440, in _default_image
return func()
File "/usr/local/sbin/cephadm", line 3457, in command_deploy
deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
assert osd_fsid
AssertionError
Any ideas what is wrong here?
Regards,
Mabi
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, May 27, 2021 12:13 PM, Eugen Block <eblock(a)nde.ag> wrote:
Hi,
I posted a link to the docs [1], [2] just yesterday ;-)
You should see the respective OSD in the output of 'cephadm
ceph-volume lvm list' on that node. You should then be able to get it
back to cephadm with
cephadm deploy --name osd.x
But I haven't tried this yet myself, so please report back if that
works for you.
Regards,
Eugen
[1] https://tracker.ceph.com/issues/49159
[2] https://tracker.ceph.com/issues/46691
Zitat von mabi mabi(a)protonmail.ch:
Hello,
I have by mistake re-installed the OS of an OSD node of my Octopus
cluster (managed by cephadm). Luckily the OSD data is on a separate
disk and did not get affected by the re-install.
Now I have the following state:
health: HEALTH_WARN
1 stray daemon(s) not managed by cephadm
1 osds down
1 host (1 osds) down
To fix that I tried to run:
ceph orch daemon add osd ceph1f:/dev/sda
=========================================
Created no osd(s) on host ceph1f; already created?
That did not work, so I tried:
ceph cephadm osd activate ceph1f
=================================
no valid command found; 10 closest matches:
...
Error EINVAL: invalid command
Did not work either. So I wanted to ask how can I "adopt" back an
OSD disk to my cluster?
Thanks for your help.
Regards,
Mabi
ceph-users mailing list -- ceph-users(a)ceph.io
To unsubscribe send an email to ceph-users-leave(a)ceph.io
ceph-users mailing list -- ceph-users(a)ceph.io
To unsubscribe send an email to ceph-users-leave(a)ceph.io
7:32 p.m.
ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2
--fsid
91a86f20-8083-40b1-8bf1-fe35fac3d677
Deploy daemon osd.2 ...
Which fsid is it, the cluster's or the OSD's? According to the
'cephadm deploy' help page it should be the cluster fsid.
Zitat von mabi <mabi(a)protonmail.ch>ch>:
> Hi Eugen,
>
> What a good coincidence ;-)
>
> So I ran "cephadm ceph-volume lvm list" on the OSD node which I
> re-instaled and it saw my osd.2 OSD. So far so good, but the
> following suggested command does not work as you can see below:
>
ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2
--fsid
91a86f20-8083-40b1-8bf1-fe35fac3d677
Deploy daemon osd.2 ...
>
> Traceback (most recent call last):
> File "/usr/local/sbin/cephadm", line 6223, in <module>
> r = args.func()
> File "/usr/local/sbin/cephadm", line 1440, in _default_image
> return func()
> File "/usr/local/sbin/cephadm", line 3457, in command_deploy
> deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
> File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
> deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
> File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
> assert osd_fsid
> AssertionError
>
> Any ideas what is wrong here?
>
> Regards,
> Mabi
>
> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> On Thursday, May 27, 2021 12:13 PM, Eugen Block <eblock(a)nde.ag> wrote:
>
>> Hi,
>>
>> I posted a link to the docs [1], [2] just yesterday ;-)
>>
>> You should see the respective OSD in the output of 'cephadm
>> ceph-volume lvm list' on that node. You should then be able to get it
>> back to cephadm with
>>
>> cephadm deploy --name osd.x
>>
>> But I haven't tried this yet myself, so please report back if that
>> works for you.
>>
>> Regards,
>> Eugen
>>
>> [1] https://tracker.ceph.com/issues/49159
>> [2] https://tracker.ceph.com/issues/46691
>>
>> Zitat von mabi mabi(a)protonmail.ch:
>>
>> > Hello,
>> > I have by mistake re-installed the OS of an OSD node of my Octopus
>> > cluster (managed by cephadm). Luckily the OSD data is on a separate
>> > disk and did not get affected by the re-install.
>> > Now I have the following state:
>> >
>> > health: HEALTH_WARN
>> > 1 stray daemon(s) not managed by cephadm
>> > 1 osds down
>> > 1 host (1 osds) down
>> >
>> >
>> > To fix that I tried to run:
>> >
>> > ceph orch daemon add osd ceph1f:/dev/sda
>> >
>> > =========================================
>> >
>> > Created no osd(s) on host ceph1f; already created?
>> > That did not work, so I tried:
>> >
>> > ceph cephadm osd activate ceph1f
>> >
>> > =================================
>> >
>> > no valid command found; 10 closest matches:
>> > ...
>> > Error EINVAL: invalid command
>> > Did not work either. So I wanted to ask how can I "adopt" back an
>> > OSD disk to my cluster?
>> > Thanks for your help.
>> > Regards,
>> > Mabi
>> >
>> > ceph-users mailing list -- ceph-users(a)ceph.io
>> > To unsubscribe send an email to ceph-users-leave(a)ceph.io
>>
>> ceph-users mailing list -- ceph-users(a)ceph.io
>> To unsubscribe send an email to ceph-users-leave(a)ceph.io
7:58 p.m.
You are right, I used the FSID of the OSD and not of the cluster in the deploy command. So
now I tried again with the cluster ID as FSID but still it does not work as you can see
below:
ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
8d47792c-987d-11eb-9bb6-a5302e00e1fa
Deploy daemon osd.2 ...
Traceback (most recent call last):
File "/usr/local/sbin/cephadm", line 6223, in <module>
r = args.func()
File "/usr/local/sbin/cephadm", line 1440, in _default_image
return func()
File "/usr/local/sbin/cephadm", line 3457, in command_deploy
deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
assert osd_fsid
AssertionError
In case that's of any help here is the output of the "cephadm ceph-volume lvm
list" command:
====== osd.2 =======
[block]
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
block device
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
block uuid W3omTg-vami-RB0V-CkVb-cgpb-88Jy-pIK2Tz
cephx lockbox secret
cluster fsid 8d47792c-987d-11eb-9bb6-a5302e00e1fa
cluster name ceph
crush device class None
encrypted 0
osd fsid 91a86f20-8083-40b1-8bf1-fe35fac3d677
osd id 2
osdspec affinity all-available-devices
type block
vdo 0
devices /dev/sda
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, May 27, 2021 12:32 PM, Eugen Block <eblock(a)nde.ag> wrote:
ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
91a86f20-8083-40b1-8bf1-fe35fac3d677
Deploy daemon osd.2 ...
Which fsid is it, the cluster's or the OSD's? According to the
'cephadm deploy' help page it should be the cluster fsid.
Zitat von mabi mabi(a)protonmail.ch:
> Hi Eugen,
> What a good coincidence ;-)
> So I ran "cephadm ceph-volume lvm list" on the OSD node which I
> re-instaled and it saw my osd.2 OSD. So far so good, but the
> following suggested command does not work as you can see below:
ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2
--fsid
91a86f20-8083-40b1-8bf1-fe35fac3d677
Deploy daemon osd.2 ...
> Traceback (most recent call last):
> File "/usr/local/sbin/cephadm", line 6223, in <module>
> r = args.func()
> File "/usr/local/sbin/cephadm", line 1440, in _default_image
> return func()
> File "/usr/local/sbin/cephadm", line 3457, in command_deploy
> deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
> File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
> deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
> File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
> assert osd_fsid
> AssertionError
> Any ideas what is wrong here?
> Regards,
> Mabi
> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> On Thursday, May 27, 2021 12:13 PM, Eugen Block eblock(a)nde.ag wrote:
>
> > Hi,
> > I posted a link to the docs [1], [2] just yesterday ;-)
> > You should see the respective OSD in the output of 'cephadm
> > ceph-volume lvm list' on that node. You should then be able to get it
> > back to cephadm with
> > cephadm deploy --name osd.x
> > But I haven't tried this yet myself, so please report back if that
> > works for you.
> > Regards,
> > Eugen
> > [1] https://tracker.ceph.com/issues/49159
> > [2] https://tracker.ceph.com/issues/46691
> > Zitat von mabi mabi(a)protonmail.ch:
> >
> > > Hello,
> > > I have by mistake re-installed the OS of an OSD node of my Octopus
> > > cluster (managed by cephadm). Luckily the OSD data is on a separate
> > > disk and did not get affected by the re-install.
> > > Now I have the following state:
> > >
> > > health: HEALTH_WARN
> > > 1 stray daemon(s) not managed by cephadm
> > > 1 osds down
> > > 1 host (1 osds) down
> > >
> > >
> > > To fix that I tried to run:
> > > ceph orch daemon add osd ceph1f:/dev/sda
> > > =========================================
> > > Created no osd(s) on host ceph1f; already created?
> > > That did not work, so I tried:
> > > ceph cephadm osd activate ceph1f
> > > =================================
> > > no valid command found; 10 closest matches:
> > > ...
> > > Error EINVAL: invalid command
> > > Did not work either. So I wanted to ask how can I "adopt" back
an
> > > OSD disk to my cluster?
> > > Thanks for your help.
> > > Regards,
> > > Mabi
> > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
> >
> > ceph-users mailing list -- ceph-users(a)ceph.io
> > To unsubscribe send an email to ceph-users-leave(a)ceph.io
ceph-users mailing list -- ceph-users(a)ceph.io
To unsubscribe send an email to ceph-users-leave(a)ceph.io
9:22 p.m.
I am trying to run "cephadm shell" on that newly installed OSD node and it seems
that I have now unfortunately configured a new cluster ID as it shows:
ubuntu@ceph1f:~$ sudo cephadm shell
ERROR: Cannot infer an fsid, one must be specified:
['8d47792c-987d-11eb-9bb6-a5302e00e1fa',
'91a86f20-8083-40b1-8bf1-fe35fac3d677']
Maybe this is causing trouble... So is there any method where I can remove the wrongly new
created cluster ID 91a86f20-8083-40b1-8bf1-fe35fac3d677 ??
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, May 27, 2021 12:58 PM, mabi <mabi(a)protonmail.ch> wrote:
You are right, I used the FSID of the OSD and not of
the cluster in the deploy command. So now I tried again with the cluster ID as FSID but
still it does not work as you can see below:
ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
8d47792c-987d-11eb-9bb6-a5302e00e1fa
Deploy daemon osd.2 ...
Traceback (most recent call last):
File "/usr/local/sbin/cephadm", line 6223, in <module>
r = args.func()
File "/usr/local/sbin/cephadm", line 1440, in _default_image
return func()
File "/usr/local/sbin/cephadm", line 3457, in command_deploy
deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
assert osd_fsid
AssertionError
In case that's of any help here is the output of the "cephadm ceph-volume lvm
list" command:
====== osd.2 =======
[block]
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
block device
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
block uuid W3omTg-vami-RB0V-CkVb-cgpb-88Jy-pIK2Tz
cephx lockbox secret
cluster fsid 8d47792c-987d-11eb-9bb6-a5302e00e1fa
cluster name ceph
crush device class None
encrypted 0
osd fsid 91a86f20-8083-40b1-8bf1-fe35fac3d677
osd id 2
osdspec affinity all-available-devices
type block
vdo 0
devices /dev/sda
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, May 27, 2021 12:32 PM, Eugen Block eblock(a)nde.ag wrote:
> > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
>
> > 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > Deploy daemon osd.2 ...
>
> Which fsid is it, the cluster's or the OSD's? According to the
> 'cephadm deploy' help page it should be the cluster fsid.
> Zitat von mabi mabi(a)protonmail.ch:
>
> > Hi Eugen,
> > What a good coincidence ;-)
> > So I ran "cephadm ceph-volume lvm list" on the OSD node which I
> > re-instaled and it saw my osd.2 OSD. So far so good, but the
> > following suggested command does not work as you can see below:
> > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
> > 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > Deploy daemon osd.2 ...
> > Traceback (most recent call last):
> > File "/usr/local/sbin/cephadm", line 6223, in <module>
> > r = args.func()
> > File "/usr/local/sbin/cephadm", line 1440, in _default_image
> > return func()
> > File "/usr/local/sbin/cephadm", line 3457, in command_deploy
> > deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
> > File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
> > deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
> > File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
> > assert osd_fsid
> > AssertionError
> > Any ideas what is wrong here?
> > Regards,
> > Mabi
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > On Thursday, May 27, 2021 12:13 PM, Eugen Block eblock(a)nde.ag wrote:
> >
> > > Hi,
> > > I posted a link to the docs [1], [2] just yesterday ;-)
> > > You should see the respective OSD in the output of 'cephadm
> > > ceph-volume lvm list' on that node. You should then be able to get it
> > > back to cephadm with
> > > cephadm deploy --name osd.x
> > > But I haven't tried this yet myself, so please report back if that
> > > works for you.
> > > Regards,
> > > Eugen
> > > [1] https://tracker.ceph.com/issues/49159
> > > [2] https://tracker.ceph.com/issues/46691
> > > Zitat von mabi mabi(a)protonmail.ch:
> > >
> > > > Hello,
> > > > I have by mistake re-installed the OS of an OSD node of my Octopus
> > > > cluster (managed by cephadm). Luckily the OSD data is on a separate
> > > > disk and did not get affected by the re-install.
> > > > Now I have the following state:
> > > >
> > > > health: HEALTH_WARN
> > > > 1 stray daemon(s) not managed by cephadm
> > > > 1 osds down
> > > > 1 host (1 osds) down
> > > >
> > > >
> > > > To fix that I tried to run:
> > > > ceph orch daemon add osd ceph1f:/dev/sda
> > > >
> > > >
=====================================================================
> > > >
> > > > Created no osd(s) on host ceph1f; already created?
> > > > That did not work, so I tried:
> > > > ceph cephadm osd activate ceph1f
> > > >
> > > >
===================================================================================================================
> > > >
> > > > no valid command found; 10 closest matches:
> > > > ...
> > > > Error EINVAL: invalid command
> > > > Did not work either. So I wanted to ask how can I "adopt"
back an
> > > > OSD disk to my cluster?
> > > > Thanks for your help.
> > > > Regards,
> > > > Mabi
> > > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
> > >
> > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
>
> ceph-users mailing list -- ceph-users(a)ceph.io
> To unsubscribe send an email to ceph-users-leave(a)ceph.io
9:51 p.m.
I managed to remove that wrongly created cluster on the node running:
sudo cephadm rm-cluster --fsid 91a86f20-8083-40b1-8bf1-fe35fac3d677 --force
So I am getting closed but the osd.2 service on that node simply does not want to start as
you can see below:
# ceph orch daemon start osd.2
Scheduled to start osd.2 on host 'ceph1f'
# ceph orch ps|grep osd.2
osd.2 ceph1f unknown 2m ago - <unknown>
<unknown> <unknown> <unknown>
In the log files I see the following:
5/27/21 2:47:34 PM[ERR]`ceph1f: cephadm unit osd.2 start` failed Traceback (most recent
call last): File "/usr/share/ceph/mgr/cephadm/module.py", line 1451, in
_daemon_action ['--name', name, a]) File
"/usr/share/ceph/mgr/cephadm/module.py", line 1168, in _run_cephadm code,
'\n'.join(err))) orchestrator._interface.OrchestratorError: cephadm exited with an
error code: 1, stderr:stderr Job for
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service failed because the control process
exited with error code. stderr See "systemctl status
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service" and "journalctl
-xe" for details. Traceback (most recent call last): File "<stdin>",
line 6159, in <module> File "<stdin>", line 1310, in _infer_fsid
File "<stdin>", line 3655, in command_unit File "<stdin>",
line 1072, in call_throws RuntimeError: Failed command: systemctl start
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2
5/27/21 2:47:34 PM[ERR]cephadm exited with an error code: 1, stderr:stderr Job for
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service failed because the control process
exited with error code. stderr See "systemctl status
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service" and "journalctl
-xe" for details. Traceback (most recent call last): File "<stdin>",
line 6159, in <module> File "<stdin>", line 1310, in _infer_fsid
File "<stdin>", line 3655, in command_unit File "<stdin>",
line 1072, in call_throws RuntimeError: Failed command: systemctl start
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2 Traceback (most recent call last): File
"/usr/share/ceph/mgr/cephadm/module.py", line 1021, in _remote_connection yield
(conn, connr) File "/usr/share/ceph/mgr/cephadm/module.py", line 1168, in
_run_cephadm code, '\n'.join(err))) orchestrator._interface.OrchestratorError:
cephadm exited with an error code: 1, stderr:stderr Job for
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service failed because the control process
exited with error code. stderr See "systemctl status
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service" and "journalctl
-xe" for details. Traceback (most recent call last): File "<stdin>",
line 6159, in <module> File "<stdin>", line 1310, in _infer_fsid
File "<stdin>", line 3655, in command_unit File "<stdin>",
line 1072, in call_throws RuntimeError: Failed command: systemctl start
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2
And finally the systemctl "status" of that osd.2 service on the OSD node:
ubuntu@ceph1f:/var/lib/ceph$ sudo systemctl status
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service
● ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service - Ceph osd.2 for
8d47792c-987d-11eb-9bb6-a5302e00e1fa
Loaded: loaded
(/etc/systemd/system/ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa@.service; disabled; vendor
preset: enabled)
Active: failed (Result: exit-code) since Thu 2021-05-27 14:48:24 CEST; 20s ago
Process: 56163 ExecStartPre=/bin/rm -f
//run/ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service-pid
//run/ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service-cid (code=exited,
status=0/SUCCESS)
Process: 56164 ExecStart=/bin/bash
/var/lib/ceph/8d47792c-987d-11eb-9bb6-a5302e00e1fa/osd.2/unit.run (code=exited,
status=127)
Process: 56165 ExecStopPost=/bin/bash
/var/lib/ceph/8d47792c-987d-11eb-9bb6-a5302e00e1fa/osd.2/unit.poststop (code=exited,
status=127)
Process: 56166 ExecStopPost=/bin/rm -f
//run/ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service-pid
//run/ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service-cid (code=exited,
status=0/SUCCESS)
May 27 14:48:14 ceph1f systemd[1]: Failed to start Ceph osd.2 for
8d47792c-987d-11eb-9bb6-a5302e00e1fa.
May 27 14:48:24 ceph1f systemd[1]:
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service: Scheduled restart job, restart
counter is at 5.
May 27 14:48:24 ceph1f systemd[1]: Stopped Ceph osd.2 for
8d47792c-987d-11eb-9bb6-a5302e00e1fa.
May 27 14:48:24 ceph1f systemd[1]:
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service: Start request repeated too
quickly.
May 27 14:48:24 ceph1f systemd[1]:
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service: Failed with result
'exit-code'.
May 27 14:48:24 ceph1f systemd[1]: Failed to start Ceph osd.2 for
8d47792c-987d-11eb-9bb6-a5302e00e1fa.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, May 27, 2021 2:22 PM, mabi <mabi(a)protonmail.ch> wrote:
I am trying to run "cephadm shell" on that
newly installed OSD node and it seems that I have now unfortunately configured a new
cluster ID as it shows:
ubuntu@ceph1f:~$ sudo cephadm shell
ERROR: Cannot infer an fsid, one must be specified:
['8d47792c-987d-11eb-9bb6-a5302e00e1fa',
'91a86f20-8083-40b1-8bf1-fe35fac3d677']
Maybe this is causing trouble... So is there any method where I can remove the wrongly
new created cluster ID 91a86f20-8083-40b1-8bf1-fe35fac3d677 ??
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, May 27, 2021 12:58 PM, mabi mabi(a)protonmail.ch wrote:
> You are right, I used the FSID of the OSD and not of the cluster in the deploy
command. So now I tried again with the cluster ID as FSID but still it does not work as
you can see below:
> ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
8d47792c-987d-11eb-9bb6-a5302e00e1fa
> Deploy daemon osd.2 ...
> Traceback (most recent call last):
> File "/usr/local/sbin/cephadm", line 6223, in <module>
>
> r = args.func()
>
>
> File "/usr/local/sbin/cephadm", line 1440, in _default_image
> return func()
> File "/usr/local/sbin/cephadm", line 3457, in command_deploy
> deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
> File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
> deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
> File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
> assert osd_fsid
> AssertionError
> In case that's of any help here is the output of the "cephadm ceph-volume
lvm list" command:
> ====== osd.2 =======
> [block]
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
> block device
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
> block uuid W3omTg-vami-RB0V-CkVb-cgpb-88Jy-pIK2Tz
> cephx lockbox secret
> cluster fsid 8d47792c-987d-11eb-9bb6-a5302e00e1fa
> cluster name ceph
> crush device class None
> encrypted 0
> osd fsid 91a86f20-8083-40b1-8bf1-fe35fac3d677
> osd id 2
> osdspec affinity all-available-devices
> type block
> vdo 0
> devices /dev/sda
> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> On Thursday, May 27, 2021 12:32 PM, Eugen Block eblock(a)nde.ag wrote:
>
> > > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
> >
> > > 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > > Deploy daemon osd.2 ...
> >
> > Which fsid is it, the cluster's or the OSD's? According to the
> > 'cephadm deploy' help page it should be the cluster fsid.
> > Zitat von mabi mabi(a)protonmail.ch:
> >
> > > Hi Eugen,
> > > What a good coincidence ;-)
> > > So I ran "cephadm ceph-volume lvm list" on the OSD node which I
> > > re-instaled and it saw my osd.2 OSD. So far so good, but the
> > > following suggested command does not work as you can see below:
> > > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
> > > 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > > Deploy daemon osd.2 ...
> > > Traceback (most recent call last):
> > > File "/usr/local/sbin/cephadm", line 6223, in <module>
> > > r = args.func()
> > > File "/usr/local/sbin/cephadm", line 1440, in _default_image
> > > return func()
> > > File "/usr/local/sbin/cephadm", line 3457, in command_deploy
> > > deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
> > > File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
> > > deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
> > > File "/usr/local/sbin/cephadm", line 2255, in
deploy_daemon_units
> > > assert osd_fsid
> > > AssertionError
> > > Any ideas what is wrong here?
> > > Regards,
> > > Mabi
> > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > > On Thursday, May 27, 2021 12:13 PM, Eugen Block eblock(a)nde.ag wrote:
> > >
> > > > Hi,
> > > > I posted a link to the docs [1], [2] just yesterday ;-)
> > > > You should see the respective OSD in the output of 'cephadm
> > > > ceph-volume lvm list' on that node. You should then be able to
get it
> > > > back to cephadm with
> > > > cephadm deploy --name osd.x
> > > > But I haven't tried this yet myself, so please report back if
that
> > > > works for you.
> > > > Regards,
> > > > Eugen
> > > > [1] https://tracker.ceph.com/issues/49159
> > > > [2] https://tracker.ceph.com/issues/46691
> > > > Zitat von mabi mabi(a)protonmail.ch:
> > > >
> > > > > Hello,
> > > > > I have by mistake re-installed the OS of an OSD node of my
Octopus
> > > > > cluster (managed by cephadm). Luckily the OSD data is on a
separate
> > > > > disk and did not get affected by the re-install.
> > > > > Now I have the following state:
> > > > >
> > > > > health: HEALTH_WARN
> > > > > 1 stray daemon(s) not managed by cephadm
> > > > > 1 osds down
> > > > > 1 host (1 osds) down
> > > > >
> > > > >
> > > > > To fix that I tried to run:
> > > > > ceph orch daemon add osd ceph1f:/dev/sda
> > > > >
=====================================================================
> > > > > Created no osd(s) on host ceph1f; already created?
> > > > > That did not work, so I tried:
> > > > > ceph cephadm osd activate ceph1f
> > > > >
===================================================================================================================
> > > > > no valid command found; 10 closest matches:
> > > > > ...
> > > > > Error EINVAL: invalid command
> > > > > Did not work either. So I wanted to ask how can I
"adopt" back an
> > > > > OSD disk to my cluster?
> > > > > Thanks for your help.
> > > > > Regards,
> > > > > Mabi
> > > > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
> > > >
> > > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
> >
> > ceph-users mailing list -- ceph-users(a)ceph.io
> > To unsubscribe send an email to ceph-users-leave(a)ceph.io
10:28 p.m.
Can you try with both cluster and osd fsid? Something like this:
pacific2:~ # cephadm deploy --name osd.2 --fsid
acbb46d6-bde3-11eb-9cf2-fa163ebb2a74 --osd-fsid
bc241cd4-e284-4c5a-aad2-5744632fc7fc
I tried to reproduce a similar scenario and found a missing config
file in the osd directory:
Error: statfs
/var/lib/ceph/acbb46d6-bde3-11eb-9cf2-fa163ebb2a74/osd.2/config: no
such file or directory
Check your syslog for more information why the osd start fails.
Zitat von mabi <mabi(a)protonmail.ch>ch>:
You are right, I used the FSID of the OSD and not of
the cluster in
the deploy command. So now I tried again with the cluster ID as FSID
but still it does not work as you can see below:
ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
8d47792c-987d-11eb-9bb6-a5302e00e1fa
Deploy daemon osd.2 ...
Traceback (most recent call last):
File "/usr/local/sbin/cephadm", line 6223, in <module>
r = args.func()
File "/usr/local/sbin/cephadm", line 1440, in _default_image
return func()
File "/usr/local/sbin/cephadm", line 3457, in command_deploy
deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
assert osd_fsid
AssertionError
In case that's of any help here is the output of the "cephadm
ceph-volume lvm list" command:
====== osd.2 =======
[block]
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
block device
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
block uuid W3omTg-vami-RB0V-CkVb-cgpb-88Jy-pIK2Tz
cephx lockbox secret
cluster fsid 8d47792c-987d-11eb-9bb6-a5302e00e1fa
cluster name ceph
crush device class None
encrypted 0
osd fsid 91a86f20-8083-40b1-8bf1-fe35fac3d677
osd id 2
osdspec affinity all-available-devices
type block
vdo 0
devices /dev/sda
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, May 27, 2021 12:32 PM, Eugen Block <eblock(a)nde.ag> wrote:
> > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
>
> > 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > Deploy daemon osd.2 ...
>
> Which fsid is it, the cluster's or the OSD's? According to the
> 'cephadm deploy' help page it should be the cluster fsid.
>
> Zitat von mabi mabi(a)protonmail.ch:
>
> > Hi Eugen,
> > What a good coincidence ;-)
> > So I ran "cephadm ceph-volume lvm list" on the OSD node which I
> > re-instaled and it saw my osd.2 OSD. So far so good, but the
> > following suggested command does not work as you can see below:
> > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
> > 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > Deploy daemon osd.2 ...
> > Traceback (most recent call last):
> > File "/usr/local/sbin/cephadm", line 6223, in <module>
> > r = args.func()
> > File "/usr/local/sbin/cephadm", line 1440, in _default_image
> > return func()
> > File "/usr/local/sbin/cephadm", line 3457, in command_deploy
> > deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
> > File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
> > deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
> > File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
> > assert osd_fsid
> > AssertionError
> > Any ideas what is wrong here?
> > Regards,
> > Mabi
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > On Thursday, May 27, 2021 12:13 PM, Eugen Block eblock(a)nde.ag wrote:
> >
> > > Hi,
> > > I posted a link to the docs [1], [2] just yesterday ;-)
> > > You should see the respective OSD in the output of 'cephadm
> > > ceph-volume lvm list' on that node. You should then be able to get it
> > > back to cephadm with
> > > cephadm deploy --name osd.x
> > > But I haven't tried this yet myself, so please report back if that
> > > works for you.
> > > Regards,
> > > Eugen
> > > [1] https://tracker.ceph.com/issues/49159
> > > [2] https://tracker.ceph.com/issues/46691
> > > Zitat von mabi mabi(a)protonmail.ch:
> > >
> > > > Hello,
> > > > I have by mistake re-installed the OS of an OSD node of my Octopus
> > > > cluster (managed by cephadm). Luckily the OSD data is on a separate
> > > > disk and did not get affected by the re-install.
> > > > Now I have the following state:
> > > >
> > > > health: HEALTH_WARN
> > > > 1 stray daemon(s) not managed by cephadm
> > > > 1 osds down
> > > > 1 host (1 osds) down
> > > >
> > > >
> > > > To fix that I tried to run:
> > > > ceph orch daemon add osd ceph1f:/dev/sda
> > > > =========================================
> > > > Created no osd(s) on host ceph1f; already created?
> > > > That did not work, so I tried:
> > > > ceph cephadm osd activate ceph1f
> > > > =================================
> > > > no valid command found; 10 closest matches:
> > > > ...
> > > > Error EINVAL: invalid command
> > > > Did not work either. So I wanted to ask how can I "adopt"
back an
> > > > OSD disk to my cluster?
> > > > Thanks for your help.
> > > > Regards,
> > > > Mabi
> > > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
> > >
> > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
>
> ceph-users mailing list -- ceph-users(a)ceph.io
> To unsubscribe send an email to ceph-users-leave(a)ceph.io
10:34 p.m.
Nicely spotted about the missing file, it looks like I have the same case as you can see
below from the syslog:
May 27 15:33:12 ceph1f systemd[1]:
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service: Scheduled restart job, restart
counter is at 1.
May 27 15:33:12 ceph1f systemd[1]: Stopped Ceph osd.2 for
8d47792c-987d-11eb-9bb6-a5302e00e1fa.
May 27 15:33:12 ceph1f systemd[1]: Starting Ceph osd.2 for
8d47792c-987d-11eb-9bb6-a5302e00e1fa...
May 27 15:33:12 ceph1f kernel: [19332.481779] overlayfs: unrecognized mount option
"volatile" or missing value
May 27 15:33:13 ceph1f kernel: [19332.709205] overlayfs: unrecognized mount option
"volatile" or missing value
May 27 15:33:13 ceph1f kernel: [19332.933442] overlayfs: unrecognized mount option
"volatile" or missing value
May 27 15:33:13 ceph1f bash[64982]: Error: statfs
/var/lib/ceph/8d47792c-987d-11eb-9bb6-a5302e00e1fa/osd.2/config: no such file or
directory
May 27 15:33:13 ceph1f systemd[1]:
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service: Control process exited,
code=exited, status=125/n/a
So how do I go to generate/create that missing
/var/lib/ceph/8d47792c-987d-11eb-9bb6-a5302e00e1fa/osd.2/config file?
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, May 27, 2021 3:28 PM, Eugen Block <eblock(a)nde.ag> wrote:
Can you try with both cluster and osd fsid? Something
like this:
pacific2:~ # cephadm deploy --name osd.2 --fsid
acbb46d6-bde3-11eb-9cf2-fa163ebb2a74 --osd-fsid
bc241cd4-e284-4c5a-aad2-5744632fc7fc
I tried to reproduce a similar scenario and found a missing config
file in the osd directory:
Error: statfs
/var/lib/ceph/acbb46d6-bde3-11eb-9cf2-fa163ebb2a74/osd.2/config: no
such file or directory
Check your syslog for more information why the osd start fails.
Zitat von mabi mabi(a)protonmail.ch:
You are right, I used the FSID of the OSD and not
of the cluster in
the deploy command. So now I tried again with the cluster ID as FSID
but still it does not work as you can see below:
ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
8d47792c-987d-11eb-9bb6-a5302e00e1fa
Deploy daemon osd.2 ...
Traceback (most recent call last):
File "/usr/local/sbin/cephadm", line 6223, in <module>
r = args.func()
File "/usr/local/sbin/cephadm", line 1440, in _default_image
return func()
File "/usr/local/sbin/cephadm", line 3457, in command_deploy
deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
assert osd_fsid
AssertionError
In case that's of any help here is the output of the "cephadm
ceph-volume lvm list" command:
====== osd.2 =======
[block]
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
block device
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
block uuid W3omTg-vami-RB0V-CkVb-cgpb-88Jy-pIK2Tz
cephx lockbox secret
cluster fsid 8d47792c-987d-11eb-9bb6-a5302e00e1fa
cluster name ceph
crush device class None
encrypted 0
osd fsid 91a86f20-8083-40b1-8bf1-fe35fac3d677
osd id 2
osdspec affinity all-available-devices
type block
vdo 0
devices /dev/sda
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, May 27, 2021 12:32 PM, Eugen Block eblock(a)nde.ag wrote:
> > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
>
> > 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > Deploy daemon osd.2 ...
>
> Which fsid is it, the cluster's or the OSD's? According to the
> 'cephadm deploy' help page it should be the cluster fsid.
> Zitat von mabi mabi(a)protonmail.ch:
>
> > Hi Eugen,
> > What a good coincidence ;-)
> > So I ran "cephadm ceph-volume lvm list" on the OSD node which I
> > re-instaled and it saw my osd.2 OSD. So far so good, but the
> > following suggested command does not work as you can see below:
> > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
> > 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > Deploy daemon osd.2 ...
> > Traceback (most recent call last):
> > File "/usr/local/sbin/cephadm", line 6223, in <module>
> > r = args.func()
> > File "/usr/local/sbin/cephadm", line 1440, in _default_image
> > return func()
> > File "/usr/local/sbin/cephadm", line 3457, in command_deploy
> > deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
> > File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
> > deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
> > File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
> > assert osd_fsid
> > AssertionError
> > Any ideas what is wrong here?
> > Regards,
> > Mabi
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > On Thursday, May 27, 2021 12:13 PM, Eugen Block eblock(a)nde.ag wrote:
> >
> > > Hi,
> > > I posted a link to the docs [1], [2] just yesterday ;-)
> > > You should see the respective OSD in the output of 'cephadm
> > > ceph-volume lvm list' on that node. You should then be able to get it
> > > back to cephadm with
> > > cephadm deploy --name osd.x
> > > But I haven't tried this yet myself, so please report back if that
> > > works for you.
> > > Regards,
> > > Eugen
> > > [1] https://tracker.ceph.com/issues/49159
> > > [2] https://tracker.ceph.com/issues/46691
> > > Zitat von mabi mabi(a)protonmail.ch:
> > >
> > > > Hello,
> > > > I have by mistake re-installed the OS of an OSD node of my Octopus
> > > > cluster (managed by cephadm). Luckily the OSD data is on a separate
> > > > disk and did not get affected by the re-install.
> > > > Now I have the following state:
> > > >
> > > > health: HEALTH_WARN
> > > > 1 stray daemon(s) not managed by cephadm
> > > > 1 osds down
> > > > 1 host (1 osds) down
> > > >
> > > >
> > > > To fix that I tried to run:
> > > > ceph orch daemon add osd ceph1f:/dev/sda
> > > >
> > > >
=====================================================================
> > > >
> > > > Created no osd(s) on host ceph1f; already created?
> > > > That did not work, so I tried:
> > > > ceph cephadm osd activate ceph1f
> > > >
> > > >
===================================================================================================================
> > > >
> > > > no valid command found; 10 closest matches:
> > > > ...
> > > > Error EINVAL: invalid command
> > > > Did not work either. So I wanted to ask how can I "adopt"
back an
> > > > OSD disk to my cluster?
> > > > Thanks for your help.
> > > > Regards,
> > > > Mabi
> > > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
> > >
> > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
>
> ceph-users mailing list -- ceph-users(a)ceph.io
> To unsubscribe send an email to ceph-users-leave(a)ceph.io
ceph-users mailing list -- ceph-users(a)ceph.io
To unsubscribe send an email to ceph-users-leave(a)ceph.io
10:37 p.m.
That file is in the regular filesystem, you can copy it from a
different osd directory, it just a minimal ceph.conf. The directory
for the failing osd should now be present after the failed attempts.
Zitat von mabi <mabi(a)protonmail.ch>ch>:
Nicely spotted about the missing file, it looks like I
have the same
case as you can see below from the syslog:
May 27 15:33:12 ceph1f systemd[1]:
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service: Scheduled
restart job, restart counter is at 1.
May 27 15:33:12 ceph1f systemd[1]: Stopped Ceph osd.2 for
8d47792c-987d-11eb-9bb6-a5302e00e1fa.
May 27 15:33:12 ceph1f systemd[1]: Starting Ceph osd.2 for
8d47792c-987d-11eb-9bb6-a5302e00e1fa...
May 27 15:33:12 ceph1f kernel: [19332.481779] overlayfs:
unrecognized mount option "volatile" or missing value
May 27 15:33:13 ceph1f kernel: [19332.709205] overlayfs:
unrecognized mount option "volatile" or missing value
May 27 15:33:13 ceph1f kernel: [19332.933442] overlayfs:
unrecognized mount option "volatile" or missing value
May 27 15:33:13 ceph1f bash[64982]: Error: statfs
/var/lib/ceph/8d47792c-987d-11eb-9bb6-a5302e00e1fa/osd.2/config: no
such file or directory
May 27 15:33:13 ceph1f systemd[1]:
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service: Control
process exited, code=exited, status=125/n/a
So how do I go to generate/create that missing
/var/lib/ceph/8d47792c-987d-11eb-9bb6-a5302e00e1fa/osd.2/config file?
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, May 27, 2021 3:28 PM, Eugen Block <eblock(a)nde.ag> wrote:
> Can you try with both cluster and osd fsid? Something like this:
>
> pacific2:~ # cephadm deploy --name osd.2 --fsid
> acbb46d6-bde3-11eb-9cf2-fa163ebb2a74 --osd-fsid
> bc241cd4-e284-4c5a-aad2-5744632fc7fc
>
> I tried to reproduce a similar scenario and found a missing config
> file in the osd directory:
>
> Error: statfs
> /var/lib/ceph/acbb46d6-bde3-11eb-9cf2-fa163ebb2a74/osd.2/config: no
> such file or directory
>
> Check your syslog for more information why the osd start fails.
>
> Zitat von mabi mabi(a)protonmail.ch:
>
> > You are right, I used the FSID of the OSD and not of the cluster in
> > the deploy command. So now I tried again with the cluster ID as FSID
> > but still it does not work as you can see below:
> > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
> > 8d47792c-987d-11eb-9bb6-a5302e00e1fa
> > Deploy daemon osd.2 ...
> > Traceback (most recent call last):
> > File "/usr/local/sbin/cephadm", line 6223, in <module>
> > r = args.func()
> > File "/usr/local/sbin/cephadm", line 1440, in _default_image
> > return func()
> > File "/usr/local/sbin/cephadm", line 3457, in command_deploy
> > deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
> > File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
> > deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
> > File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
> > assert osd_fsid
> > AssertionError
> > In case that's of any help here is the output of the "cephadm
> > ceph-volume lvm list" command:
> > ====== osd.2 =======
> > [block]
> >
>
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
> >
> > block device
> >
> >
> >
>
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
> > block uuid W3omTg-vami-RB0V-CkVb-cgpb-88Jy-pIK2Tz
> > cephx lockbox secret
> > cluster fsid 8d47792c-987d-11eb-9bb6-a5302e00e1fa
> > cluster name ceph
> > crush device class None
> > encrypted 0
> > osd fsid 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > osd id 2
> > osdspec affinity all-available-devices
> > type block
> > vdo 0
> > devices /dev/sda
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > On Thursday, May 27, 2021 12:32 PM, Eugen Block eblock(a)nde.ag wrote:
> >
> > > > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
> > >
> > > > 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > > > Deploy daemon osd.2 ...
> > >
> > > Which fsid is it, the cluster's or the OSD's? According to the
> > > 'cephadm deploy' help page it should be the cluster fsid.
> > > Zitat von mabi mabi(a)protonmail.ch:
> > >
> > > > Hi Eugen,
> > > > What a good coincidence ;-)
> > > > So I ran "cephadm ceph-volume lvm list" on the OSD node
which I
> > > > re-instaled and it saw my osd.2 OSD. So far so good, but the
> > > > following suggested command does not work as you can see below:
> > > > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
> > > > 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > > > Deploy daemon osd.2 ...
> > > > Traceback (most recent call last):
> > > > File "/usr/local/sbin/cephadm", line 6223, in
<module>
> > > > r = args.func()
> > > > File "/usr/local/sbin/cephadm", line 1440, in
_default_image
> > > > return func()
> > > > File "/usr/local/sbin/cephadm", line 3457, in
command_deploy
> > > > deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
> > > > File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
> > > > deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
> > > > File "/usr/local/sbin/cephadm", line 2255, in
deploy_daemon_units
> > > > assert osd_fsid
> > > > AssertionError
> > > > Any ideas what is wrong here?
> > > > Regards,
> > > > Mabi
> > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > > > On Thursday, May 27, 2021 12:13 PM, Eugen Block eblock(a)nde.ag wrote:
> > > >
> > > > > Hi,
> > > > > I posted a link to the docs [1], [2] just yesterday ;-)
> > > > > You should see the respective OSD in the output of 'cephadm
> > > > > ceph-volume lvm list' on that node. You should then be able
> to get it
> > > > > back to cephadm with
> > > > > cephadm deploy --name osd.x
> > > > > But I haven't tried this yet myself, so please report back if
that
> > > > > works for you.
> > > > > Regards,
> > > > > Eugen
> > > > > [1] https://tracker.ceph.com/issues/49159
> > > > > [2] https://tracker.ceph.com/issues/46691
> > > > > Zitat von mabi mabi(a)protonmail.ch:
> > > > >
> > > > > > Hello,
> > > > > > I have by mistake re-installed the OS of an OSD node of my
Octopus
> > > > > > cluster (managed by cephadm). Luckily the OSD data is on
> a separate
> > > > > > disk and did not get affected by the re-install.
> > > > > > Now I have the following state:
> > > > > >
> > > > > > health: HEALTH_WARN
> > > > > > 1 stray daemon(s) not managed by cephadm
> > > > > > 1 osds down
> > > > > > 1 host (1 osds) down
> > > > > >
> > > > > >
> > > > > > To fix that I tried to run:
> > > > > > ceph orch daemon add osd ceph1f:/dev/sda
> > > > > >
> > > > > >
> =====================================================================
> > > > > >
> > > > > > Created no osd(s) on host ceph1f; already created?
> > > > > > That did not work, so I tried:
> > > > > > ceph cephadm osd activate ceph1f
> > > > > >
> > > > > >
>
===================================================================================================================
> > > > > >
> > > > > > no valid command found; 10 closest matches:
> > > > > > ...
> > > > > > Error EINVAL: invalid command
> > > > > > Did not work either. So I wanted to ask how can I
"adopt" back an
> > > > > > OSD disk to my cluster?
> > > > > > Thanks for your help.
> > > > > > Regards,
> > > > > > Mabi
> > > > > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > > > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
> > > > >
> > > > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
> > >
> > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
>
> ceph-users mailing list -- ceph-users(a)ceph.io
> To unsubscribe send an email to ceph-users-leave(a)ceph.io
10:52 p.m.
It works again but I had to do after a start/stop of the OSD on an admin node:
# ceph orch daemon stop osd.2
# ceph orch daemon start tosd.2
What an adventure, thanks again so much for your help!
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, May 27, 2021 3:37 PM, Eugen Block <eblock(a)nde.ag> wrote:
That file is in the regular filesystem, you can copy
it from a
different osd directory, it just a minimal ceph.conf. The directory
for the failing osd should now be present after the failed attempts.
Zitat von mabi mabi(a)protonmail.ch:
Nicely spotted about the missing file, it looks
like I have the same
case as you can see below from the syslog:
May 27 15:33:12 ceph1f systemd[1]:
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service: Scheduled
restart job, restart counter is at 1.
May 27 15:33:12 ceph1f systemd[1]: Stopped Ceph osd.2 for
8d47792c-987d-11eb-9bb6-a5302e00e1fa.
May 27 15:33:12 ceph1f systemd[1]: Starting Ceph osd.2 for
8d47792c-987d-11eb-9bb6-a5302e00e1fa...
May 27 15:33:12 ceph1f kernel: [19332.481779] overlayfs:
unrecognized mount option "volatile" or missing value
May 27 15:33:13 ceph1f kernel: [19332.709205] overlayfs:
unrecognized mount option "volatile" or missing value
May 27 15:33:13 ceph1f kernel: [19332.933442] overlayfs:
unrecognized mount option "volatile" or missing value
May 27 15:33:13 ceph1f bash[64982]: Error: statfs
/var/lib/ceph/8d47792c-987d-11eb-9bb6-a5302e00e1fa/osd.2/config: no
such file or directory
May 27 15:33:13 ceph1f systemd[1]:
ceph-8d47792c-987d-11eb-9bb6-a5302e00e1fa(a)osd.2.service: Control
process exited, code=exited, status=125/n/a
So how do I go to generate/create that missing
/var/lib/ceph/8d47792c-987d-11eb-9bb6-a5302e00e1fa/osd.2/config file?
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, May 27, 2021 3:28 PM, Eugen Block eblock(a)nde.ag wrote:
> Can you try with both cluster and osd fsid? Something like this:
> pacific2:~ # cephadm deploy --name osd.2 --fsid
> acbb46d6-bde3-11eb-9cf2-fa163ebb2a74 --osd-fsid
> bc241cd4-e284-4c5a-aad2-5744632fc7fc
> I tried to reproduce a similar scenario and found a missing config
> file in the osd directory:
> Error: statfs
> /var/lib/ceph/acbb46d6-bde3-11eb-9cf2-fa163ebb2a74/osd.2/config: no
> such file or directory
> Check your syslog for more information why the osd start fails.
> Zitat von mabi mabi(a)protonmail.ch:
>
> > You are right, I used the FSID of the OSD and not of the cluster in
> > the deploy command. So now I tried again with the cluster ID as FSID
> > but still it does not work as you can see below:
> > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
> > 8d47792c-987d-11eb-9bb6-a5302e00e1fa
> > Deploy daemon osd.2 ...
> > Traceback (most recent call last):
> > File "/usr/local/sbin/cephadm", line 6223, in <module>
> > r = args.func()
> > File "/usr/local/sbin/cephadm", line 1440, in _default_image
> > return func()
> > File "/usr/local/sbin/cephadm", line 3457, in command_deploy
> > deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
> > File "/usr/local/sbin/cephadm", line 2193, in deploy_daemon
> > deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
> > File "/usr/local/sbin/cephadm", line 2255, in deploy_daemon_units
> > assert osd_fsid
> > AssertionError
> > In case that's of any help here is the output of the "cephadm
> > ceph-volume lvm list" command:
> > ====== osd.2 =======
> > [block]
>
>
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
>
> > block device
> >
>
>
/dev/ceph-cca8abe6-cf9b-4c2f-ab81-ae0758585414/osd-block-91a86f20-8083-40b1-8bf1-fe35fac3d677
>
> > block uuid W3omTg-vami-RB0V-CkVb-cgpb-88Jy-pIK2Tz
> > cephx lockbox secret
> > cluster fsid 8d47792c-987d-11eb-9bb6-a5302e00e1fa
> > cluster name ceph
> > crush device class None
> > encrypted 0
> > osd fsid 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > osd id 2
> > osdspec affinity all-available-devices
> > type block
> > vdo 0
> > devices /dev/sda
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > On Thursday, May 27, 2021 12:32 PM, Eugen Block eblock(a)nde.ag wrote:
> >
> > > > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
> > >
> > > > 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > > > Deploy daemon osd.2 ...
> > >
> > > Which fsid is it, the cluster's or the OSD's? According to the
> > > 'cephadm deploy' help page it should be the cluster fsid.
> > > Zitat von mabi mabi(a)protonmail.ch:
> > >
> > > > Hi Eugen,
> > > > What a good coincidence ;-)
> > > > So I ran "cephadm ceph-volume lvm list" on the OSD node
which I
> > > > re-instaled and it saw my osd.2 OSD. So far so good, but the
> > > > following suggested command does not work as you can see below:
> > > > ubuntu@ceph1f:~$ sudo cephadm deploy --name osd.2 --fsid
> > > > 91a86f20-8083-40b1-8bf1-fe35fac3d677
> > > > Deploy daemon osd.2 ...
> > > > Traceback (most recent call last):
> > > > File "/usr/local/sbin/cephadm", line 6223, in
<module>
> > > > r = args.func()
> > > > File "/usr/local/sbin/cephadm", line 1440, in
_default_image
> > > > return func()
> > > > File "/usr/local/sbin/cephadm", line 3457, in
command_deploy
> > > > deploy_daemon(args.fsid, daemon_type, daemon_id, c, uid, gid,
> > > > File "/usr/local/sbin/cephadm", line 2193, in
deploy_daemon
> > > > deploy_daemon_units(fsid, uid, gid, daemon_type, daemon_id, c,
> > > > File "/usr/local/sbin/cephadm", line 2255, in
deploy_daemon_units
> > > > assert osd_fsid
> > > > AssertionError
> > > > Any ideas what is wrong here?
> > > > Regards,
> > > > Mabi
> > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > > > On Thursday, May 27, 2021 12:13 PM, Eugen Block eblock(a)nde.ag wrote:
> > > >
> > > > > Hi,
> > > > > I posted a link to the docs [1], [2] just yesterday ;-)
> > > > > You should see the respective OSD in the output of 'cephadm
> > > > > ceph-volume lvm list' on that node. You should then be able
> > > > > to get it
> >
> > > > > back to cephadm with
> > > > > cephadm deploy --name osd.x
> > > > > But I haven't tried this yet myself, so please report back
if that
> > > > > works for you.
> > > > > Regards,
> > > > > Eugen
> > > > > [1] https://tracker.ceph.com/issues/49159
> > > > > [2] https://tracker.ceph.com/issues/46691
> > > > > Zitat von mabi mabi(a)protonmail.ch:
> > > > >
> > > > > > Hello,
> > > > > > I have by mistake re-installed the OS of an OSD node of my
Octopus
> > > > > > cluster (managed by cephadm). Luckily the OSD data is on
> > > > > > a separate
> >
> > > > > > disk and did not get affected by the re-install.
> > > > > > Now I have the following state:
> > > > > >
> > > > > > health: HEALTH_WARN
> > > > > > 1 stray daemon(s) not managed by cephadm
> > > > > > 1 osds down
> > > > > > 1 host (1 osds) down
> > > > > >
> > > > > >
> > > > > > To fix that I tried to run:
> > > > > > ceph orch daemon add osd ceph1f:/dev/sda
>
> =====================================================================
>
> > > > > > Created no osd(s) on host ceph1f; already created?
> > > > > > That did not work, so I tried:
> > > > > > ceph cephadm osd activate ceph1f
>
>
===================================================================================================================
>
> > > > > > no valid command found; 10 closest matches:
> > > > > > ...
> > > > > > Error EINVAL: invalid command
> > > > > > Did not work either. So I wanted to ask how can I
"adopt" back an
> > > > > > OSD disk to my cluster?
> > > > > > Thanks for your help.
> > > > > > Regards,
> > > > > > Mabi
> > > > > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > > > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
> > > > >
> > > > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
> > >
> > > ceph-users mailing list -- ceph-users(a)ceph.io
> > > To unsubscribe send an email to ceph-users-leave(a)ceph.io
>
> ceph-users mailing list -- ceph-users(a)ceph.io
> To unsubscribe send an email to ceph-users-leave(a)ceph.io
ceph-users mailing list -- ceph-users(a)ceph.io
To unsubscribe send an email to ceph-users-leave(a)ceph.io
1092
days inactive
1092
days old
10 comments
2 participants
participants (2)
-
Eugen Block -
mabi