Hi everyone, I'm working on replacing OSDs node with the newer one. The new host has the new hostname and new disk (faster one but the same size with old disk). My plan is - Reweight the OSD to zero to spread all existed data to the rest nodes to keep data availability - set flag noout, norebalance, norecover, nobackfill, destroy the OSD and join the new OSD as the same ID of the old one. By above approach, the cluster will remap PGs of all nodes. Each data will be moved twice times until it reach the new OSD (reweight and join new node as same ID) I also did the other way that only set flags and destroy OSD. But the result is still the same (degraded objects from destroyed osd and misplaced object after joining new osd) Are there any ways to replace the OSD node directly without remapping PGs of the whole cluster? Many thanks! Nghia. _______________________________________________ ceph-users mailing list -- ceph-users(a)ceph.io To unsubscribe send an email to ceph-users-leave(a)ceph.io

The strategy that Nghia described is inefficient for moving data more than once, but safe since there are always N copies, vs a strategy of setting noout, destroying the OSDs, and recreating them on the new server. That would be more efficient, albeit with a period of reduced redundancy. I’ve done what Eugen describes, slightly differently: - Create a staging root - Create a host bucket there with the new nodename - Create new OSDs, CRUSH weight them to 0 - Move into the production root - Weight up using your method of choice Another option would be, if the hardware is compatible, to set noout, take down one node, destroy the OSDs, swap in the new drives/node, provision the OSDs with the same IDs, and wait for balancing. But you have a period of reduced redundancy, and the wrong drive failing can cause grief. I think, though, that this sort of scenario may be what swap-bucket was designed for. https://docs.ceph.com/docs/mimic/rados/operations/bluestore-migration/ > On Apr 1, 2020, at 5:43 AM, Eugen Block <eblock(a)nde.ag> wrote: > > Hi, > > I have a different approach in mind for a replacement, we > successfully accomplished that last year in our production > environment where we replaced all nodes of the cluster with newer > hardware. Of course we wanted to avoid rebalancing the data > multiple times. > > What we did was to create a new "root" bucket in our crush tree > parallel to the root=default, then we moved the old nodes to the > new root. This can't trigger rebalancing because there was no host > available in the default root anymore, but the data was still > available to the clients as if nothing had changed. > Then we added the new nodes to the default root with initial osd > crush weight = 0. After all new nodes and OSDs were there we > increased the weight to start data movement. This way all PGs were > recreated only once on the new nodes, slowly draining the old > servers. > > This should be a valid approach for a single server, too. Create a > (temporary) new root or bucket within your crush tree and move the > old host to that bucket. Then add your new server to the correct > root with initial osd crush weight = 0. When all OSDs are there, > increase the weight for all OSDs at once to start the data movement. > > This was all in a Luminous cluster. > > Regards, > Eugen > > > Zitat von Nghia Viet Tran <Nghia.Viet.Tran(a)mgm-tp.com>om>: > >> Hi everyone, >> >> I'm working on replacing OSDs node with the newer one. The new >> host has the new hostname and new disk (faster one but the same >> size with old disk). My plan is >> - Reweight the OSD to zero to spread all existed data to the rest >> nodes to keep data availability >> - set flag noout, norebalance, norecover, nobackfill, destroy the >> OSD and join the new OSD as the same ID of the old one. >> >> By above approach, the cluster will remap PGs of all nodes. Each >> data will be moved twice times until it reach the new OSD >> (reweight and join new node as same ID) >> >> I also did the other way that only set flags and destroy OSD. But >> the result is still the same (degraded objects from destroyed osd >> and misplaced object after joining new osd) >> >> Are there any ways to replace the OSD node directly without >> remapping PGs of the whole cluster? >> >> Many thanks! >> Nghia. >> _______________________________________________ >> ceph-users mailing list -- ceph-users(a)ceph.io >> To unsubscribe send an email to ceph-users-leave(a)ceph.io > > > _______________________________________________ > ceph-users mailing list -- ceph-users(a)ceph.io > To unsubscribe send an email to ceph-users-leave(a)ceph.io