[ceph-users] Re: Ceph Upgrade path

We successfully did ceph-deploy+octopus+centos7 -> (ceph-deploy unsupported)+octopus+centos8stream (using leap) -> (ceph-deploy unsupported)+pacific+centos8stream -> cephadm+pacific+centos8stream Everything in place. Leap was tested repeatedly till the procedure/sideeffects were very well known. We also did s/centos8stream/rocky8/ successfully. Thanks, Kevin ________________________________________ From: Iztok Gregori <iztok.gregori(a)elettra.eu> Sent: Wednesday, February 1, 2023 3:51 AM To: ceph-users(a)ceph.io Subject: [ceph-users] Ceph Upgrade path Check twice before you click! This email originated from outside PNNL. Hi to all! We are running a Ceph cluster (Octopus) on (99%) CentOS 7 (deployed at the time with ceph-deploy) and we would like to upgrade it. As far as I know for Pacific (and later releases) there aren't packages for CentOS 7 distribution (at least not on download.ceph.com), so we need to upgrade (change) not only Ceph but also the distribution. What is the raccomended path to do so? We could upgrade (reinstall) all the nodes to Rocky 8 and then upgrade Ceph to Quincy, but we will "stuck" with "not the latest" distribution and probably we will have to upgrade (reinstall) again in the near future. Our second idea is to leverage cephadm (which we would like to implement) and switch from rpms to containers, but I don't have a clear vision of how to do it. I was thinking to: 1. install a new monitor/manager with Rocky 9. 2. prepare the node for cephadm. 3. start the manager/monitor containers on that node. 4. repeat for the other monitors. 5. repeat for the OSD servers. I'm not sure how to execute the point 2 and 3. The documentation says how to bootstrap a NEW cluster and how to ADOPT an existing one, but our situation is a hybrid (or in my mind it is...). I cannot also adopt my current cluster to cephadm because we have 30% of our OSD still on filestore. My intention was to drain them, reinstall them and then adopt them. But I would like to avoid (if not necessary) multiple reinstallations. In my mind all the OSD servers will be drained before been reinstalled, just to be sure to have a "fresh" start). Have you any ideas and/or advice to give us? Thanks a lot! Iztok P.S. I saw that the script cephadm doesn't support Rocky, I can modify it to do so and it should work, but is there a plan to officially support it? -- Iztok Gregori ICT Systems and Services Elettra - Sincrotrone Trieste S.C.p.A. Telephone: +39 040 3758948 https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.elettr… _______________________________________________ ceph-users mailing list -- ceph-users(a)ceph.io To unsubscribe send an email to ceph-users-leave(a)ceph.io