[ceph-users] Re: which of cpu frequency and number of threads servers osd better?

My plan is to use at least 500GB NVMe per HDD OSD. I have not started that yet, but there are threads of other people sharing their experience. If you go beyond 300GB per OSD, apparently the WAL/DB options cannot really use the extra capacity. With dm-cache or the like you would additionally start holding hot data in cache. Ideally, I can split a 4TB or even a 8TB NVMe over 6 OSDs. Best regards, ================= Frank Schilder AIT Risø Campus Bygning 109, rum S14 ________________________________________ From: Anthony D'Atri <anthony.datri(a)gmail.com> Sent: 14 November 2020 10:57:57 To: Frank Schilder Subject: Re: [ceph-users] Re: which of cpu frequency and number of threads servers osd better? Guten Tag. Do you have any insights into the benefits of that approach instead of WAL/DB, and of dm-cache vs bcache vs dm-writecache vs … ? And any for sizing the cache device and handling failures? Presumably the DB will be active enough that it will persist in the cache, so sizing should be at a minimum that to hold 2 copies of the DB to accomodate compaction? I have an existing RGW cluster on HDDs that utilizes a cache tier; the high water mark is set fairly low so that it doesn’t fill up, something that apparently happened last Christmas. I’ve been wanting to get a feel for OSD cache as an alternative to deprecated and fussy cache tiering, as well as something like a Varnish cache on RGW load balancers to short-circult small requests. — Anthony