Hi, I also observe an increase in pgmap version every second or so, see snippet below. I
run mimic 13.2.8 without any PG scaling/upmapping. Why does the version increase so
often?
May 14 12:33:50 ceph-03 journal: cluster 2020-05-14 12:33:48.521546 mgr.ceph-02
mgr.27460080 192.168.32.66:0/63 114833 : cluster [DBG] pgmap v114860: 2545 pgs: 2
active+clean+scrubbing+deep, 2543 active+clean; 195 TiB data, 249 TiB used, 1.5 PiB / 1.8
PiB avail; 4.8 MiB/s rd, 11 MiB/s wr, 1.48 kop/s
May 14 12:33:50 ceph-02 journal: 2020-05-14 12:33:50.543 7fdb57c5b700 0
log_channel(cluster) log [DBG] : pgmap v114861: 2545 pgs: 2 active+clean+scrubbing+deep,
2543 active+clean; 195 TiB data, 249 TiB used, 1.5 PiB / 1.8 PiB avail; 5.6 MiB/s rd, 11
MiB/s wr, 1.21 kop/s
May 14 12:33:52 ceph-02 journal: 2020-05-14 12:33:52.565 7fdb57c5b700 0
log_channel(cluster) log [DBG] : pgmap v114862: 2545 pgs: 2 active+clean+scrubbing+deep,
2543 active+clean; 195 TiB data, 249 TiB used, 1.5 PiB / 1.8 PiB avail; 8.9 MiB/s rd, 16
MiB/s wr, 1.59 kop/s
The version increases every second, here from pgmap v114860 to pgmap v114862. Current
cluster status:
[root@gnosis]# ceph status
cluster:
id: ---
health: HEALTH_OK
services:
mon: 3 daemons, quorum ceph-01,ceph-02,ceph-03
mgr: ceph-02(active), standbys: ceph-01, ceph-03
mds: con-fs2-1/1/1 up {0=ceph-08=up:active}, 1 up:standby-replay
osd: 288 osds: 268 up, 268 in
data:
pools: 10 pools, 2545 pgs
objects: 80.80 M objects, 195 TiB
usage: 249 TiB used, 1.5 PiB / 1.8 PiB avail
pgs: 2543 active+clean
2 active+clean+scrubbing+deep
io:
client: 20 MiB/s rd, 21 MiB/s wr, 578 op/s rd, 1.08 kop/s wr
Thanks for any info!
=================
Frank Schilder
AIT Risø Campus
Bygning 109, rum S14
________________________________________
From: Nghia Viet Tran <Nghia.Viet.Tran(a)mgm-tp.com>
Sent: 14 May 2020 03:49:38
To: Bryan Henderson; Ceph users mailing list
Subject: [ceph-users] Re: What is a pgmap?
If your Ceph cluster are running on the latest version of Ceph then the the pg_autoscaler
probably is the reason. After the period of time, Ceph will check the cluster status and
increase/decrease the number of PG in the cluster if needed.
On 5/14/20, 03:37, "Bryan Henderson" <bryanh(a)giraffe-data.com> wrote:
I'm surprised I couldn't find this explained anywhere (I did look), but ...
What is the pgmap and why does it get updated every few seconds on a tiny
cluster that's mostly idle?
I do know what a placement group (PG) is and that when documentation talks
about placement group maps, it is talking about something else -- mapping of
PGs to OSDs by CRUSH and OSD maps.
--
Bryan Henderson San Jose, California
_______________________________________________
ceph-users mailing list -- ceph-users(a)ceph.io
To unsubscribe send an email to ceph-users-leave(a)ceph.io
_______________________________________________
ceph-users mailing list -- ceph-users(a)ceph.io
To unsubscribe send an email to ceph-users-leave(a)ceph.io