Correct, just comma separated IP addresses -- Paul Mezzanini Sr Systems Administrator / Engineer, Research Computing Information & Technology Services Finance & Administration Rochester Institute of Technology o:(585) 475-3245 | pfmeec@rit.edu CONFIDENTIALITY NOTE: The information transmitted, including attachments, is intended only for the person(s) or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and destroy any copies of this information. ------------------------ ________________________________________ From: Eugen Block <eblock@nde.ag> Sent: Friday, November 6, 2020 9:00 AM To: Paul Mezzanini Cc: ceph-users@ceph.io Subject: Re: [ceph-users] Re: Mon went down and won't come back So the mon_host line is without a port, correct, just the IP? Zitat von Paul Mezzanini <pfmeec@rit.edu>:
Relevant ceph.conf file lines: [global] mon initial members = ceph-mon-01,ceph-mon-03 mon host = IPFor01,IPFor03 mon max pg per osd = 400 mon pg warn max object skew = -1
[mon] mon allow pool delete = true
ceph config has: global advanced mon_max_pg_per_osd 400 global advanced mon_pg_warn_max_object_skew -1.000000 global dev mon_warn_on_pool_pg_num_not_power_of_two false mon advanced mon_allow_pool_delete true
I'm slowly pulling it all into ceph config and I just haven't sat down to verify it and deploy the stub config everywhere. Non power of two is set because i'm slowly walking a pool back to a lower PG num and I was sick of the health warn :) (same with max pg per osd but I'm well under 400 now so I could purge that line)
Again, lightly sanitized. The actual IP's do match forward and reverse DNS.
-- Paul Mezzanini Sr Systems Administrator / Engineer, Research Computing Information & Technology Services Finance & Administration Rochester Institute of Technology o:(585) 475-3245 | pfmeec@rit.edu
CONFIDENTIALITY NOTE: The information transmitted, including attachments, is intended only for the person(s) or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and destroy any copies of this information. ------------------------
________________________________________ From: Eugen Block <eblock@nde.ag> Sent: Friday, November 6, 2020 3:41 AM To: ceph-users@ceph.io Subject: [ceph-users] Re: Mon went down and won't come back
Hi,
can you share your ceph.conf (mon section)?
Zitat von Paul Mezzanini <pfmeec@rit.edu>:
Hi everyone,
I figure it's time to pull in more brain power on this one. We had an NVMe mostly die in one of our monitors and it caused the write latency for the machine to spike. Ceph did the RightThing(tm) and when it lost quorum on that machine it was ignored. I pulled the bad drive out of the array and tried to bring the mon and mgr back in (our monitors double-duty as managers).
The manager came up 0 problems but the monitor got stuck probing.
I removed the bad host from the monmap and stood up a new one on an OSD node to get back to 3 active. That new node added perfectly using the same methods I've tried on the old one.
Network appears to be clean between all hosts. Packet captures show them chatting just fine. Since we are getting ready to upgrade from RHEL7 to RHEL8 I took this as an opportunity to reinstall the monitor as an 8 box to get that process rolling. Box is now on RHEL8 with no changes to how ceph-mon is acting.
I install machines with a kickstart and use our own ansible roles to get it 95% into service. I then follow the manual install instructions (https://docs.ceph.com/en/latest/rados/operations/add-or-rm-mons/#adding-moni...).
Time is in sync, /var/lib/ceph/mon/* is owned by the right UID, keys are in sync, configs are in sync. I pulled the old mon out of "mon initial members" and "mon host". `nc` can talk to all the ports in question and we've tried it with firewalld off as well (ditto with selinux). Cleaned up some stale DNS and even tried a different IP (same DNS name). I started all of this with 14.2.12 but .13 was released while debugging so I've got that on the broken monitor at the moment.
I manually start the daemon in debug mode (/usr/bin/ceph-mon -d --cluster ceph --id ceph-mon-02 --setuser ceph --setgroup ceph) until it's joined in then use the systemd scripts to start it once it's clean. The current state is:
(Lightly sanitized output) :snip: 2020-11-04 11:38:57.049 7f4232fb3540 0 mon.ceph-mon-02 does not exist in monmap, will attempt to join an existing cluster 2020-11-04 11:38:57.049 7f4232fb3540 0 using public_addr v2:Num.64:0/0 -> [v2:Num.64:3300/0,v1:Num.64:6789/0] 2020-11-04 11:38:57.050 7f4232fb3540 0 starting mon.ceph-mon-02 rank -1 at public addrs [v2:Num.64:3300/0,v1:Num.64:6789/0] at bind addrs [v2:Num.64:3300/0,v1:Num.64:6789/0] mon_data /var/lib/ceph/mon/ceph-ceph-mon-02 fsid 8514c8d5-4cd3-4dee-b460-27633e3adb1a 2020-11-04 11:38:57.051 7f4232fb3540 1 mon.ceph-mon-02@-1(???) e25 preinit fsid 8514c8d5-4cd3-4dee-b460-27633e3adb1a 2020-11-04 11:38:57.051 7f4232fb3540 1 mon.ceph-mon-02@-1(???) e25 initial_members ceph-mon-01,ceph-mon-03, filtering seed monmap 2020-11-04 11:38:57.051 7f4232fb3540 0 mon.ceph-mon-02@-1(???).mds e430081 new map 2020-11-04 11:38:57.051 7f4232fb3540 0 mon.ceph-mon-02@-1(???).mds e430081 print_map :snip: 2020-11-04 11:38:57.053 7f4232fb3540 0 mon.ceph-mon-02@-1(???).osd e1198618 crush map has features 288514119978713088, adjusting msgr requires 2020-11-04 11:38:57.053 7f4232fb3540 0 mon.ceph-mon-02@-1(???).osd e1198618 crush map has features 288514119978713088, adjusting msgr requires 2020-11-04 11:38:57.053 7f4232fb3540 0 mon.ceph-mon-02@-1(???).osd e1198618 crush map has features 3314933069571702784, adjusting msgr requires 2020-11-04 11:38:57.053 7f4232fb3540 0 mon.ceph-mon-02@-1(???).osd e1198618 crush map has features 288514119978713088, adjusting msgr requires 2020-11-04 11:38:57.054 7f4232fb3540 1 mon.ceph-mon-02@-1(???).paxosservice(auth 54141..54219) refresh upgraded, format 0 -> 3 2020-11-04 11:38:57.069 7f421d891700 1 mon.ceph-mon-02@-1(probing) e25 handle_auth_request failed to assign global_id ^^^ last line repeated every few seconds until process killed
I've exhausted everything I can think of so I've just been doing the scientific shotgun (one slug at a time) approach to see what changes. Does anyone else have any ideas?
-- Paul Mezzanini Sr Systems Administrator / Engineer, Research Computing Information & Technology Services Finance & Administration Rochester Institute of Technology o:(585) 475-3245 | pfmeec@rit.edu
CONFIDENTIALITY NOTE: The information transmitted, including attachments, is intended only for the person(s) or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and destroy any copies of this information. ------------------------ _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io
_______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io