Thanks for following up and trying to reproduce the error. I've tried the commands you posted: root@ceph0:~# cephadm enter --name smb.smb.4.0.ceph0.xcbqff smbclient -d 10 -U 'media%media' //localhost/media -c ls <trimmed output> gensec_update_send: ntlmssp[0x5579a2320a20]: subreq: 0x5579a233aec0 gensec_update_send: spnego[0x5579a2324c40]: subreq: 0x5579a233b2e0 gensec_update_done: ntlmssp[0x5579a2320a20]: NT_STATUS_OK tevent_req[0x5579a233aec0/../../auth/ntlmssp/ntlmssp.c:189]: state[2] error[0 (0x0)] state[struct gensec_ntlmssp_update_state (0x5579a233b0a0)] timer[(nil)] finish[../../auth/ntlmssp/ntlmssp.c:231] gensec_update_done: spnego[0x5579a2324c40]: NT_STATUS_MORE_PROCESSING_REQUIRED tevent_req[0x5579a233b2e0/../../auth/gensec/spnego.c:1614]: state[2] error[0 (0x0)] state[struct gensec_spnego_update_state (0x5579a233b4c0)] timer[(nil)] finish[../../auth/gensec/spnego.c:2109] SPNEGO login failed: The attempted logon is invalid. This is either due to a bad username or authentication information. Freeing parametrics: session setup failed: NT_STATUS_LOGON_FAILURE root@ceph0:~# cephadm enter --name smb.smb.4.0.ceph0.xcbqff getent passwd media Inferring fsid aca834ef-5617-47fd-be18-283faba1f0b1 media:x:1000:1000::/invalid:/bin/false root@ceph0:~# cephadm enter --name smb.smb.4.0.ceph0.xcbqff pdbedit -L Inferring fsid aca834ef-5617-47fd-be18-283faba1f0b1 (no output after pbdedit, just the next prompt line) I sadly can't for the life of me figure out where to find the logs for the samba server. -Michael Sudnick Sent from Proton Mail for Android. -------- Original Message -------- On Tuesday, 12/09/25 at 14:45 John Mulligan via ceph-users <ceph-users@ceph.io> wrote: On Tuesday, December 9, 2025 11:45:43 AM Eastern Standard Time Michael Sudnick via ceph-users wrote:
Sorry for the wall of text. I'm getting an error when trying to access smb shares (or even list shares as an authenticated user. An anonymous user can list shares) from a Linux client. Tests are performed with: podman run --rm -it quay.io/samba.org/samba-client:latest
# smbclient -N -L 10.0.150.77 Anonymous login successful
Sharename Type Comment --------- ---- ------- IPC$ IPC IPC Service (Samba 4.23.2) media Disk SMB1 disabled -- no workgroup available
However when I attempt to specify a user: I get the following error from the client with the following command: # smbclient -d 10 -U media%media -L 10.0.150.77
gensec_update_send: ntlmssp[0x55a593b774c0]: subreq: 0x55a593b72b80 gensec_update_send: spnego[0x55a593b75800]: subreq: 0x55a593b8b1e0 gensec_update_done: ntlmssp[0x55a593b774c0]: NT_STATUS_OK tevent_req[0x55a593b72b80/../../auth/ntlmssp/ntlmssp.c:189]: state[2] error[0 (0x0)] state[struct gensec_ntlmssp_up date_state (0x55a593b72d60)] timer[(nil)] finish[../../auth/ntlmssp/ntlmssp.c:231] gensec_update_done: spnego[0x55a593b75800]: NT_STATUS_MORE_PROCESSING_REQUIRED tevent_req[0x55a593b8b1e0/../../auth/gensec/spnego.c:1614]: state[2] error[0 (0x0)] state[stru ct gensec_spnego_update_state (0x55a593b8b3c0)] timer[(nil)] finish[../../auth/gensec/spnego.c:2109] SPNEGO login failed: The attempted logon is invalid. This is either due to a bad username or authentication information. session setup failed: NT_STATUS_LOGON_FAILURE Freeing parametrics:
My cluster and share definitions are as follows. It looks like there are a few remnants of various attempts are getting it working: # ceph smb show { "resources": [ { "resource_type": "ceph.smb.cluster", "cluster_id": "smb", "auth_mode": "user", "intent": "present", "user_group_settings": [ { "source_type": "resource", "ref": "smbeskkuhxm" } ], "placement": { "count": 5 }, "clustering": "always", "public_addrs": [ { "address": "10.0.150.77/16" } ] }, { "resource_type": "ceph.smb.share", "cluster_id": "smb", "share_id": "media", "intent": "present", "name": "media", "readonly": false, "browseable": true, "cephfs": { "volume": "cephfs", "path": "/", "subvolumegroup": "smb", "subvolume": "media", "provider": "samba-vfs" }, "login_control": [ { "name": "media", "category": "user", "access": "admin" } ] }, { "resource_type": "ceph.smb.usersgroups", "users_groups_id": "smbeskkuhxm", "intent": "present", "values": { "users": [ { "name": "media", "password": "media" } ], "groups": [] }, "linked_to_cluster": "smb" } ] }
-Michael Sudnick
Thank you for trying the SMB support out! Also, thanks for providing the JSON so I know what your configuration generally looks like. I adapted the JSON to one of my own clusters (changed the IPs and placement) and deployed it. I was able to connect to the share on my cluster: smbclient -U 'media%media' //192.168.76.202/media Try "help" to get a list of possible commands. smb: \> So I'm not entirely sure what has happened on your cluster. If I had reproduced the error I would have first tried again to see if using the smbclient inside the smb container image produced the same result, and then I would have looked to see if the users got created in the container image correctly. Some example commands: (on a ceph cluster node) # cephadm enter -i smb smbclient -U 'media%media' //localhost/media -c ls # cephadm enter -i smb getent passwd media # cephadm enter -i smb pdbedit -L You could also try to redploy with smbd logging cranked way up and see if anything interesting appears in the logs. For now you can add: {"custom_smb_global_options": { "log level": "10", "_allow_customization: "i- take-responsibility-for-all-samba-configuration-errors"}} to the cluster resource json (We're going to make enabling debug logging easier in future versions FWIW) _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io