24 Nov
2020
24 Nov
'20
8:56 p.m.
I had to roll an upstream version of the smartmon tools because everything with redhat 7/8
was too old to support the json option.
--
Paul Mezzanini
Sr Systems Administrator / Engineer, Research Computing
Information & Technology Services
Finance & Administration
Rochester Institute of Technology
o:(585) 475-3245 | pfmeec(a)rit.edu
CONFIDENTIALITY NOTE: The information transmitted, including attachments, is
intended only for the person(s) or entity to which it is addressed and may
contain confidential and/or privileged material. Any review, retransmission,
dissemination or other use of, or taking of any action in reliance upon this
information by persons or entities other than the intended recipient is
prohibited. If you received this in error, please contact the sender and
destroy any copies of this information.
------------------------
________________________________________
From: Tony Liu <tonyliu0592(a)hotmail.com>
Sent: Tuesday, November 24, 2020 3:21 PM
To: ceph-users(a)ceph.io
Subject: [ceph-users] smartctl UNRECOGNIZED OPTION: json=o
Hi,
With Ceph Octopus 15.2.5, here is the output of command
"ceph device get-health-metrics SEAGATE_DL2400MM0159_WBM2WP2S".
===============================
"20201123-000939": {
"dev": "/dev/sde",
"error": "smartctl failed",
"nvme_smart_health_information_add_log_error": "nvme returned an
error: sudo: exit status: 231",
"nvme_smart_health_information_add_log_error_code": -22,
"nvme_vendor": "seagate",
"smartctl_error_code": -22,
"smartctl_output": "smartctl returned an error (1): stderr:\nsudo:
exit status: 1\nstdout:\nsmartctl 6.6 2017-11-05 r4594
[x86_64-linux-4.18.0-147.el8.x86_64] (local build)\nCopyright (C) 2002-17, Bruce Allen,
Christian Franke, www.smartmontools.org\n\n=======> UNRECOGNIZED OPTION: json=o\n\nUse
smartctl -h to get a usage summary\n\n"
},
===============================
Is this error expected?
The disk is SAS HDD, why those keywords with "nvme_" prefix?
Is the same keywords used for all types of disk?
Where can I see the command line options for running smartctl?
Thanks!
Tony
_______________________________________________
ceph-users mailing list -- ceph-users(a)ceph.io
To unsubscribe send an email to ceph-users-leave(a)ceph.io