I'm not sure off-hand. The module did have several changes as recently as pacific so it's possible something is broken. Perhaps you don't have a file system created yet? I would still expect to see the commands however... I suggest you figure out why Ceph Pacific+ can't detect your hard disk drives (???). That seems more productive than debugging a long EOLifed release. On Tue, Sep 19, 2023 at 8:49 AM Patrick Begou <Patrick.Begou@univ-grenoble-alpes.fr> wrote:
Hi Patrick,
sorry for the bad copy/paste. As it was not working I have also tried with the module name 😕
[ceph: root@mostha1 /]# ceph fs snap-schedule no valid command found; 10 closest matches: fs status [<fs>] fs volume ls fs volume create <name> [<placement>] fs volume rm <vol_name> [<yes-i-really-mean-it>] fs subvolumegroup ls <vol_name> fs subvolumegroup create <vol_name> <group_name> [<pool_layout>] [<uid:int>] [<gid:int>] [<mode>] fs subvolumegroup rm <vol_name> <group_name> [--force] fs subvolume ls <vol_name> [<group_name>] fs subvolume create <vol_name> <sub_name> [<size:int>] [<group_name>] [<pool_layout>] [<uid:int>] [<gid:int>] [<mode>] [--namespace-isolated] fs subvolume rm <vol_name> <sub_name> [<group_name>] [--force] [--retain-snapshots] Error EINVAL: invalid command
I'm reading the same documentation, but for Octopus: https://docs.ceph.com/en/octopus/cephfs/snap-schedule/#
I think that if "ceph mgr module enable snap_schedule" was not working without the "--force" option, it was because something was wrong in my Ceph install.
Patrick
Le 19/09/2023 à 14:29, Patrick Donnelly a écrit :
https://docs.ceph.com/en/quincy/cephfs/snap-schedule/#usage
ceph fs snap-schedule
(note the hyphen!)
On Tue, Sep 19, 2023 at 8:23 AM Patrick Begou <Patrick.Begou@univ-grenoble-alpes.fr> wrote:
Hi,
still some problems with snap_schedule as as the ceph fs snap-schedule namespace is not available on my nodes.
[ceph: root@mostha1 /]# ceph mgr module ls | jq -r '.enabled_modules []' cephadm dashboard iostat prometheus restful snap_schedule
[ceph: root@mostha1 /]# ceph fs snap_schedule no valid command found; 10 closest matches: fs status [<fs>] fs volume ls fs volume create <name> [<placement>] fs volume rm <vol_name> [<yes-i-really-mean-it>] fs subvolumegroup ls <vol_name> fs subvolumegroup create <vol_name> <group_name> [<pool_layout>] [<uid:int>] [<gid:int>] [<mode>] fs subvolumegroup rm <vol_name> <group_name> [--force] fs subvolume ls <vol_name> [<group_name>] fs subvolume create <vol_name> <sub_name> [<size:int>] [<group_name>] [<pool_layout>] [<uid:int>] [<gid:int>] [<mode>] [--namespace-isolated] fs subvolume rm <vol_name> <sub_name> [<group_name>] [--force] [--retain-snapshots] Error EINVAL: invalid command
I think I need your help to go further 😕
Patrick Le 19/09/2023 à 10:23, Patrick Begou a écrit :
Hi,
bad question, sorry. I've just run
ceph mgr module enable snap_schedule --force
to solve this problem. I was just afraid to use "--force" 😕 but as I can break this test configuration....
Patrick
Le 19/09/2023 à 09:47, Patrick Begou a écrit :
Hi,
I'm working on a small POC for a ceph setup on 4 old C6100 power-edge. I had to install Octopus since latest versions were unable to detect the HDD (too old hardware ??). No matter, this is only for training and understanding Ceph environment.
My installation is based on https://download.ceph.com/rpm-15.2.12/el8/noarch/cephadm-15.2.12-0.el8.noarc... bootstrapped.
I'm reaching the point to automate the snapshots (I can create snapshot by hand without any problem). The documentation https://download.ceph.com/rpm-15.2.12/el8/noarch/cephadm-15.2.12-0.el8.noarc... says to use the snap_schedule module but this module does not exist.
# ceph mgr module ls | jq -r '.enabled_modules []' cephadm dashboard iostat prometheus restful
Have I missed something ? Is there some additional install steps to do for this module ?
Thanks for your help.
Patrick _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io
ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io
ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io
-- Patrick Donnelly, Ph.D. He / Him / His Red Hat Partner Engineer IBM, Inc. GPG: 19F28A586F808C2402351B93C3301A3E258DD79D