Hello,
Yes I upgraded the system to Centos8 and now I can install the dashboard module.
But the problem now is, I cannot log in to the dashboard.
I deleted every cached file on my end and reinstalled the mgr and dashboard several
times.
If I try to log in with a wrong password, it tells me that it's wrong, but if i use
the right password, it just gives me a "500 Internal Server Error".
I enabled the debug mode for the mgr: ceph config set mgr mgr/dashboard/log_level debug
But in the /var/log/ceph/ceph-mgr.node1.log it just tells me this generic message (ips
replaced with 0.0.0.0):
2020-04-28T14:11:15.191+0200 7f0baba8c700 0 [dashboard DEBUG request]
[::ffff:0.0.0.0:61383] [POST] [None] /api/auth
2020-04-28T14:11:15.282+0200 7f0bcf164700 0 log_channel(cluster) log [DBG] : pgmap v316:
273 pgs: 273 active+clean; 2.4 TiB data, 7.1 TiB used, 18 TiB / 25 TiB avail
2020-04-28T14:11:15.453+0200 7f0baba8c700 0 [dashboard DEBUG controllers.auth] Login
successful
2020-04-28T14:11:15.453+0200 7f0baba8c700 0 [dashboard ERROR request]
[::ffff:0.0.0.0:61383] [POST] [500] [0.264s] [513.0B]
[100ecd9a-5d09-419f-8b9f-31bc3d4042b4] /api/auth
2020-04-28T14:11:15.453+0200 7f0baba8c700 0 [dashboard ERROR request]
[b'{"status": "500 Internal Server Error", "detail":
"The server encountered an unexpected condition which prevented it from fulfilling
the request.", "request_id":
"100ecd9a-5d09-419f-8b9f-31bc3d4042b4"}
']
2020-04-28T14:11:15.454+0200 7f0baba8c700 0 [dashboard INFO request]
[::ffff:0.0.0.0:61383] [POST] [500] [0.264s] [513.0B]
[100ecd9a-5d09-419f-8b9f-31bc3d4042b4] /api/auth
How can I find out, where the problem is?
Thanks in advance,
Simon
________________________________
Von: gert.wieberdink(a)ziggo.nl <gert.wieberdink(a)ziggo.nl>
Gesendet: Donnerstag, 23. April 2020 20:34:58
An: ceph-users(a)ceph.io
Betreff: [ceph-users] Re: Upgrading to Octopus
Hello Simon,
I think that Khodayar is right. I managed to install a new Ceph cluster on CentOS 8.1.
Therefore you will need the ceph-el8.repo for the time being. For some reason,
"they" left the py3 packages you mentioned out of EPEL (as with leveldb, but
this package appeared luckily last week in EPEL).
Please find below the ceph-el8.repo file, which you have to create in /etc/yum.repos.d/
[copr:copr.fedorainfracloud.org:ktdreyer:ceph-el8]
name=Copr repo for ceph-el8 owned by ktdreyer
baseurl=https://download.copr.fedorainfracloud.org/results/ktdreyer/ceph-el…
type=rpm-md
skip_if_unavailable=True
gpgcheck=1
gpgkey=https://download.copr.fedorainfracloud.org/results/ktdreyer/ceph-el8…
repo_gpgcheck=0
enabled=1
enabled_metadata=1
This repository - and CentOS 8.x - should have been sufficient to bring up a fresh Ceph
cluster.
Please let me know if you still have problems in configuring your Ceph cluster.
rgds,
-gw
_______________________________________________
ceph-users mailing list -- ceph-users(a)ceph.io
To unsubscribe send an email to ceph-users-leave(a)ceph.io