Hi, on octopus 15.2.4 I have an issue with cephfs tag auth. The following works fine: client.f9desktop key: .... caps: [mds] allow rw caps: [mon] allow r caps: [osd] allow rw pool=cephfs_data, allow rw pool=ssd_data, allow rw pool=fast_data, allow rw pool=arich_data, allow rw pool=ecfast_data but this one does not. client.f9desktopnew key: .... caps: [mds] allow rw caps: [mon] allow r caps: [osd] allow rw tag cephfs data=cephfs For the 2nd, mds works, files can be created or removed, but client read/write (native client, kernel version 5.7.4) fails with I/O error, so osd part does not seem to be working properly. Any clues what can be wrong? the cephfs was created in jewel... Another issue is: if osd caps are updated (adding data pool), then some clients refresh the caps, but most of them do not, and the only way to refresh it is to remount the filesystem. working tag would solve it. Best regards, Andrej -- _____________________________________________________________ prof. dr. Andrej Filipcic, E-mail: Andrej.Filipcic@ijs.si Department of Experimental High Energy Physics - F9 Jozef Stefan Institute, Jamova 39, P.o.Box 3000 SI-1001 Ljubljana, Slovenia Tel.: +386-1-477-3674 Fax: +386-1-477-3166 -------------------------------------------------------------