Hi Vladimir, no it is the same on all monitors. Actually I got triggered because I got slow responses on my rados gateway with the radosgw-admin command and narrowed it down to slow respons for rados commands anywhere in the cluster. The cluster is not that busy and all osds and monitors use very little resources compared to what they have onboard Kind Regards Marcel Kuiper
Hi Marcel, If this issue related to only one monitor? If yes, check the overall node status: average load, disk I/O, RAM consumption, swap size, etc. Could be not a ceph-related issue.
Regards, Vladimir.
On Wed, Aug 26, 2020 at 9:07 AM Marcel Kuiper <ceph@mknet.nl> wrote:
Hi
One of my clusters running nautilus 14.2.8 is very slow (13 seconds or so where my other clusters are returning almost instantanious) when doing a 'rados --pool rc3-se.rgw.buckets.index ls' from one of the monitors.
I checked - ceph status => OK - routing to/from osds ok (I see a lot of established connections to osds due to the command, nothing in syn_sent indicating incomplete handshake) - ping times are OK - no interface errors - no packet drops - no increasing send queus - and as far as I can see nothing out of the ordinary in mon and osd logs
I have no clue how to debug the issue. If someone has pointers it would be much appreciated
Kind Regards
Marcel _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io
_______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io