When deploy rgw container, cephadm adds rgw_frontends into config db on daemon level. I was adding settings on node level. That's why I didn't see my setting take effect. I need to put rgw_frontends on daemon level after deployment. Thanks! Tony ________________________________________ From: Tony Liu <tonyliu0592@hotmail.com> Sent: July 29, 2023 11:44 PM To: ceph-users@ceph.io; dev@ceph.io Subject: [ceph-users] Re: configure rgw A few updates. 1. "radosgw-admin --show-config -n client.rgw.qa.ceph-1.hzfrwq" doesn't show actual running config. 2. "ceph --admin-daemon /var/run/ceph/69f94d08-2811-11ee-9ab1-089204adfafa/ceph-client.rgw.qa.ceph-1.hzfrwq.7.94254493095368.asok config show" shows the actual running config. 3. All settings in client.rgw are applied to rgw running config, except for rgw_frontends. ``` # ceph config get client.rgw rgw_frontends beast port=8086 # ceph --admin-daemon /var/run/ceph/69f94d08-2811-11ee-9ab1-089204adfafa/ceph-client.rgw.qa.ceph-1.hzfrwq.7.94254493095368.asok config get rgw_frontends { "rgw_frontends": "beast endpoint=10.250.80.100:80" } ``` The only place I see "10.250.80.100" and "80" is unit.meta. How is that applied? Found a workaround, remove rgw_frontends from config, restart rgw, rgw_frontends goes back to default "port=7480". Add it back to config, restart rgw. Now rgw_frontends is what I expect. The logic doesn't make much sense to me. I'd assume that unit.meta has something to do with this, hopefully someone could shed light here. Thanks! Tony ________________________________________ From: Tony Liu <tonyliu0592@hotmail.com> Sent: July 29, 2023 10:40 PM To: ceph-users@ceph.io; dev@ceph.io Subject: [ceph-users] configure rgw Hi, I'm using Pacific v16.2.10 container image, deployed by cephadm. I used to manually build config file for rgw, deploy rgw, put config file in place and restart rgw. It works fine. Now, I'd like to put rgw config into config db. I tried with client.rgw, but the config is not taken by rgw. Also "config show" doesn't work. It always says "no config state". ``` # ceph orch ps | grep rgw rgw.qa.ceph-1.hzfrwq ceph-1 10.250.80.100:80 running (10m) 10m ago 53m 51.4M - 16.2.10 32214388de9d 13169a213bc5 # ceph config get client.rgw | grep frontends client.rgw basic rgw_frontends beast port=8086 * # ceph config show rgw.qa.ceph-1.hzfrwq Error ENOENT: no config state for daemon rgw.qa.ceph-1.hzfrwq # ceph config show client.rgw.qa.ceph-1.hzfrwq Error ENOENT: no config state for daemon client.rgw.qa.ceph-1.hzfrwq # radosgw-admin --show-config -n client.rgw.qa.ceph-1.hzfrwq | grep frontends rgw_frontends = beast port=7480 ``` Any clues what I am missing here? Thanks! Tony _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io