Hi We have a bunch of HDD OSD hosts with DB/WAL on PCI NVMe, either 2 x 3.2TB or 1 x 6.4TB. We used to have 4 SSDs pr node for journals before bluestore and those have been repurposed for an SSD pool (wear level is fine). We've been using the following service specs to avoid the PCI NVMe devices for bluestore being provisioned as OSDs: --- service_type: osd service_id: fast service_name: osd.fast placement: host_pattern: '*' spec: data_devices: rotational: 0 size: :1000G <-- only use devices smaller than 1TB = not PCI NVMe filter_logic: AND objectstore: bluestore --- service_type: osd service_id: slow service_name: osd.slow placement: host_pattern: '*' spec: block_db_size: 290966113186 data_devices: rotational: 1 db_devices: rotational: 0 size: '1000G:' <-- only use devices larger than 1TB for DB/WAL filter_logic: AND objectstore: bluestore --- We just bought a few 7.68 TB SATA SSDs to add to the SSD pool which aren't being picked up by the osd.fast spec because they are too large and they could also be picked up as DB/WAL with the current specs. As far as I can determine there is no way to achieve what I want with the existing specs, as I can't filter on PCI vs SATA, only rotational or not, I can't use size, as it only can define an in between range, not an outside range, and I can't use filter_logic OR for the sizes because I need the rotational qualifier to be AND. I can do a osd.fast2 spec with size: 7000G: and change the db_devices size for osd.slow to something like 1000G:7000G but curious to see if anyone would have a different suggestion? Mvh. Torkil -- Torkil Svensgaard Sysadmin MR-Forskningssektionen, afs. 714 DRCMR, Danish Research Centre for Magnetic Resonance Hvidovre Hospital Kettegård Allé 30 DK-2650 Hvidovre Denmark Tel: +45 386 22828 E-mail: torkil@drcmr.dk