Hello,Yes I did but wasn't able to suggest anything further to get around it,
however:1/ There is currently an issue with 15.2.2 so I would advise holding off any
upgrade2/ Another mail list user replied to one of your older emails in the thread asking
for some manager logs not sure if you have seen this.Thanks ---- On Fri, 22 May 2020
01:21:26 +0800 gencer(a)gencgiyen.com wrote ----Hi Ashley,Have you seen my previous reply?
If so, and no solution then does anyone has any idea how can this be done with 2
node?Thanks,Gencer.
On 20.05.2020 16:33:53, Gencer W. Genç
<gencer(a)gencgiyen.com> wrote:
This is 2 node setup. I have no third node :(
I am planning to add more in the future but
currently 2 nodes only.At the moment, is there a --force command for such usage?
On 20.05.2020 16:32:15, Ashley Merrick
<singapore(a)amerrick.co.uk> wrote:Correct, however it will need to stop one to do the
upgrade leaving you with only one working MON (this is what I would suggest the error
means seeing i had the same thing when I only had a single MGR), normally is suggested to
have 3 MONs due to quorum.Do you not have a node you can run a mon for the few minutes to
complete the upgrade?---- On Wed, 20 May 2020 21:28:19 +0800 Gencer W. Genç
<gencer(a)gencgiyen.com> wrote ----I have 2 mons and 2 mgrs. cluster: id:
7d308992-8899-11ea-8537-7d489fa7c193 health: HEALTH_OK services: mon: 2 daemons,
quorum vx-rg23-rk65-u43-130,vx-rg23-rk65-u43-130-1 (age 91s) mgr:
vx-rg23-rk65-u43-130.arnvag(active, since 28m), standbys: vx-rg23-rk65-u43-130-1.pxmyie
mds: cephfs:1 {0=cephfs.vx-rg23-rk65-u43-130.kzjznt=up:active} 1 up:standby osd: 24
osds: 24 up (since 69m), 24 in (since 3w) task status: scrub status:
mds.cephfs.vx-rg23-rk65-u43-130.kzjznt: idle data: pools: 4 pools, 97 pgs
objects: 1.38k objects, 4.8 GiB usage: 35 GiB used, 87 TiB / 87 TiB avail pgs:
97 active+clean io: client: 5.3 KiB/s wr, 0 op/s rd, 0 op/s wr progress:
Upgrade to docker.io/ceph/ceph:v15.2.2 (33s) [=...........................]
(remaining: 9m)Isn't both mons already up? I have no way to add third mon
btw.Thnaks,Gencer.On 20.05.2020 16:21:03, Ashley Merrick <singapore(a)amerrick.co.uk>
wrote:Yes, I think it's because your only running two mons, so the script is halting
at a check to stop you being in the position of just one running (no backup).I had the
same issue with a single MGR instance and had to add a second to allow to upgrade to
continue, can you bring up an extra MON?Thanks---- On Wed, 20 May 2020 21:18:09 +0800
Gencer W. Genç <gencer(a)gencgiyen.com> wrote ----Hi Ashley,I see this:[INF] Upgrade:
Target is docker.io/ceph/ceph:v15.2.2 with id
4569944bbW86c3f9b5286057a558a3f852156079f759c9734e54d4f64092be9fa[INF] Upgrade: It is NOT
safe to stop mon.vx-rg23-rk65-u43-130Does this meaning anything to you?I've also
attached full log. See especially after line #49. I stopped and restart upgrade
there.Thanks,Gencer.On 20.05.2020 16:13:00, Ashley Merrick
<singapore(a)amerrick.co.uk> wrote:ceph config set mgr
mgr/cephadm/log_to_cluster_level debugceph -W cephadm --watch-debugSee if you see anything
that stands out as an issue with the update, seems it has completed only the two MGR
instancesIf not:ceph orch upgrade stopceph orch upgrade start --ceph-version 15.2.2and
monitor the watch-debug logMake sure at the end you run:ceph config set mgr
mgr/cephadm/log_to_cluster_level info---- On Wed, 20 May 2020 21:07:43 +0800 Gencer W.
Genç <gencer(a)gencgiyen.com> wrote ----Ah yes,{ "mon": {
"ceph version 15.2.1 (9fd2f65f91d9246fae2c841a6222d34d121680ee) octopus
(stable)": 2 }, "mgr": { "ceph version 15.2.2
(0c857e985a29d90501a285f242ea9c008df49eb8) octopus (stable)": 2 },
"osd": { "ceph version 15.2.1
(9fd2f65f91d9246fae2c841a6222d34d121680ee) octopus (stable)": 24 },
"mds": { "ceph version 15.2.1
(9fd2f65f91d9246fae2c841a6222d34d121680ee) octopus (stable)": 2 },
"overall": { "ceph version 15.2.1
(9fd2f65f91d9246fae2c841a6222d34d121680ee) octopus (stable)": 28, "ceph
version 15.2.2 (0c857e985a29d90501a285f242ea9c008df49eb8) octopus (stable)": 2
}}How can i fix this?Gencer.On 20.05.2020 16:04:33, Ashley Merrick
<singapore(a)amerrick.co.uk> wrote:Does:ceph versionsshow any services yet running on
15.2.2?---- On Wed, 20 May 2020 21:01:12 +0800 Gencer W. Genç <gencer(a)gencgiyen.com>
wrote ----Hi Ashley,$ ceph orch upgrade status { "target_image":
"docker.io/ceph/ceph:v15.2.2", "in_progress": true,
"services_complete": [], "message": ""}Thanks,Gencer.On
20.05.2020 15:58:34, Ashley Merrick <singapore(a)amerrick.co.uk> wrote:What does ceph
orch upgrade status show?---- On Wed, 20 May 2020 20:52:39 +0800 Gencer W. Genç
<gencer(a)gencgiyen.com> wrote ----Hi, I've 15.2.1 installed on all machines. On
primary machine I executed ceph upgrade command: $ ceph orch upgrade start --ceph-version
15.2.2 When I check ceph -s I see this: progress: Upgrade to
docker.io/ceph/ceph:v15.2.2 (30m) [=...........................] (remaining: 8h) It
says 8 hours. It is already ran for 3 hours. No upgrade processed. It get stuck at this
point. Is there any way to know why this has stuck? Thanks,
Gencer._______________________________________________ceph-users mailing list --
ceph-users(a)ceph.ioTo unsubscribe send an email to ceph-users-leave(a)ceph.io