[ceph-users] Re: after octopus cluster reinstall, rbd map fails with timeout

Not entirely sure about this... but after a bunch of cluster teardown and rebuilds I got rbds mapped. Seems to me like biggest difference is that recently, I was sticking to using the webgui to create the pools (and I did the enable-application = rbd checkbox!!!) but this last time, I went back to the old commandline, including rbd pool init testpool So maybe there's something that the command line is doing, that the gui SHOULD be doing, but isnt. ----- Original Message ----- From: "Philip Brown" <pbrown(a)medata.com> To: "ceph-users" <ceph-users(a)ceph.io> Sent: Tuesday, December 22, 2020 4:43:32 PM Subject: after octopus cluster reinstall, rbd map fails with timeout More banging on my prototype cluster, and ran into an odd problem. Used to be, when I create an rbd device, then try to map it, it would initially fail, saying I have to disable some features. Then I just run the suggested disable line -- usually rbd feature disable poolname/rbdname object-map fast-diff deep-flatten and then I can map it fine. but now after the latest cluster recreation, when I try to map, I just get # rbd map testpool/zfs02 rbd: sysfs write failed In some cases useful info is found in syslog - try "dmesg | tail". rbd: map failed: (110) Connection timed out and no errors in dmesg output if I try to disable those features anyway, I get librbd::Operations: one or more requested features are already disabled(22) Invalid argument nothing in /var/log/ceph/cephadm.log either Any suggestions? -- Philip Brown| Sr. Linux System Administrator | Medata, Inc. 5 Peters Canyon Rd Suite 250 Irvine CA 92606 Office 714.918.1310| Fax 714.918.1325 pbrown(a)medata.com| www.medata.com