As I mentioned in my earlier e-mail, new to Ceph, and trying to set up automation to deploy, configure, and manage a Ceph cluster. We configure our Firewall rules through SaltStack. I am passing the -skip-firewalld option to the cephadm bootstrap command, but cephadm seems to ignore the option and configures the firewall anyway. I have even reconfigured the options order to be the same as cephadm boostrap -help but it still ignores the option and configures the firewall. This creates issues as it configures the public zone, which we don't want changed. Below is the command we are using (with obvious settings changed/removed). cephadm bootstrap --mon-ip 10.0.0.0 --mgr-id host.domain.name --fsid [fsid] --ssh-private-key id_rsa --ssh-public-key id_rsa.pub --ssh-user [user] --cluster-network 192.168.0.0/25 --allow-fqdn-hostname --config=./ceph.conf --initial-dashboard-user admin --initial-dashboard-password SuperS3cr3tPassw0rd --dashboard-password-noupdate --skip-firewalld --with-centralized-logging --apply-spec=spec.yaml What am I missing? Anestis Kozakis Systems Administrator - Multi-Level Security Solutions P: + 61 2 6122 0205 M: +61 4 88 376 339 anestis.kozakis@raytheon.com.au<mailto:anestis.kozakis@raytheon.com.au> Raytheon Australia Cybersecurity and Information Assurance 4 Brindabella Cct Brindabella Business Park Canberra Airport, ACT 2609 www.raytheonaustralia.com.au<http://www.raytheonaustralia.com.au/> LinkedIn<https://au.linkedin.com/company/raytheon-australia> | Twitter<https://twitter.com/RaytheonAU> | Facebook<https://www.facebook.com/RaytheonAustralia> | Instagram<https://www.instagram.com/raytheonaustralia/>