Hi Xiubo, Did you get a chance to work on this? I am curious to test out the improvements. Thanks and Regards, Ashu Pachauri On Fri, Mar 17, 2023 at 3:33 PM Frank Schilder <frans@dtu.dk> wrote:
Hi Ashu,
thanks for the clarification. That's not an option that is easy to change. I hope that the modifications to the fs clients Xiubo has in mind will improve that. Thanks for flagging this performance issue. Would be great if this becomes part of a test suite.
Best regards, ================= Frank Schilder AIT Risø Campus Bygning 109, rum S14
________________________________________ From: Ashu Pachauri <ashu210890@gmail.com> Sent: 17 March 2023 09:55:25 To: Xiubo Li Cc: Frank Schilder; ceph-users@ceph.io Subject: Re: [ceph-users] Re: CephFS thrashing through the page cache
Hi Xiubo,
As you have correctly pointed out, I was talking about the stipe_unit setting in the file layout configuration. Here is the documentation for that for anyone else's reference: https://docs.ceph.com/en/quincy/cephfs/file-layouts/
As with any RAID0 setup, the stripe_unit is definitely workload dependent. Our use case requires us to read somewhere from a few kilobytes to a few hundred kilobytes at once. Having a 4MB default stripe_unit definitely hurts quite a bit. We were able to achieve almost 2x improvement in terms of average latency and overall throughput (for useful data) by reducing the stripe_unit. The rule of thumb is that you want to align the stripe_unit to your most common IO size.
BTW, have you tried to set 'rasize' option to a small size instead of 0 ? Won't this work ?
No this won't work. I have tried it already. Since rasize simply impacts readahead, your minimum io size to the cephfs client will still be at the maximum of (rasize, stripe_unit). rasize is a useful configuration only if it is required to be larger than the stripe_unit, otherwise it's not. Also, it's worth pointing out that simply setting rasize is not sufficient; one needs to change the corresponding configurations that control maximum/minimum readahead for ceph clients.
Thanks and Regards, Ashu Pachauri
On Fri, Mar 17, 2023 at 2:14 PM Xiubo Li <xiubli@redhat.com<mailto: xiubli@redhat.com>> wrote:
On 15/03/2023 17:20, Frank Schilder wrote:
Hi Ashu,
are you talking about the kernel client? I can't find "stripe size" anywhere in its mount-documentation. Could you possibly post exactly what you did? Mount fstab line, config setting?
There is no mount option to do this in both userspace and kernel clients. You need to change the file layout, which is (4MB stripe_unit, 1 stripe_count and 4MB object_size) by default, instead.
Certainly with a smaller size of the stripe_unit will work. But IMO it will depend and be careful, changing the layout may cause other performance issues in some case, for example too small stripe_unit size may split the sync read into more osd requests to different OSDs.
I will generate one patch to make the kernel client wiser instead of blindly setting it to stripe_unit always.
Thanks
- Xiubo
Thanks! ================= Frank Schilder AIT Risø Campus Bygning 109, rum S14
________________________________________ From: Ashu Pachauri <ashu210890@gmail.com<mailto:ashu210890@gmail.com>> Sent: 14 March 2023 19:23:42 To: ceph-users@ceph.io<mailto:ceph-users@ceph.io> Subject: [ceph-users] Re: CephFS thrashing through the page cache
Got the answer to my own question; posting here if someone else encounters the same problem. The issue is that the default stripe size
in a
cephfs mount is 4 MB. If you are doing small reads (like 4k reads in the test I posted) inside the file, you'll end up pulling at least 4MB to the client (and then discarding most of the pulled data) even if you set readahead to zero. So, the solution for us was to set a lower stripe size, which aligns better with our workloads.
Thanks and Regards, Ashu Pachauri
On Fri, Mar 10, 2023 at 9:41 PM Ashu Pachauri <ashu210890@gmail.com <mailto:ashu210890@gmail.com>> wrote:
Also, I am able to reproduce the network read amplification when I try to do very small reads from larger files. e.g.
for i in $(seq 1 10000); do dd if=test_${i} of=/dev/null bs=5k count=10 done
This piece of code generates a network traffic of 3.3 GB while it actually reads approx 500 MB of data.
Thanks and Regards, Ashu Pachauri
On Fri, Mar 10, 2023 at 9:22 PM Ashu Pachauri <ashu210890@gmail.com <mailto:ashu210890@gmail.com>> wrote:
We have an internal use case where we back the storage of a proprietary database by a shared file system. We noticed something very odd when testing some workload with a local block device backed file system vs cephfs. We noticed that the amount of network IO done by cephfs is almost double compared to the IO done in case of a local file system backed by an attached block device.
We also noticed that CephFS thrashes through the page cache very quickly compared to the amount of data being read and think that the two issues might be related. So, I wrote a simple test.
1. I wrote 10k files 400KB each using dd (approx 4 GB data). 2. I dropped the page cache completely. 3. I then read these files serially, again using dd. The page cache usage shot up to 39 GB for reading such a small amount of data.
Following is the code used to repro this in bash:
for i in $(seq 1 10000); do dd if=/dev/zero of=test_${i} bs=4k count=100 done
sync; echo 1 > /proc/sys/vm/drop_caches
for i in $(seq 1 10000); do dd if=test_${i} of=/dev/null bs=4k count=100 done
The ceph version being used is: ceph version 15.2.13 (c44bc49e7a57a87d84dfff2a077a2058aa2172e2) octopus (stable)
The ceph configs being overriden: WHO MASK LEVEL OPTION VALUE RO mon advanced auth_allow_insecure_global_id_reclaim false
mgr advanced mgr/balancer/mode upmap
mgr advanced mgr/dashboard/server_addr 127.0.0.1 * mgr advanced mgr/dashboard/server_port 8443 * mgr advanced mgr/dashboard/ssl false * mgr advanced mgr/prometheus/server_addr 0.0.0.0 * mgr advanced mgr/prometheus/server_port 9283 * osd advanced bluestore_compression_algorithm lz4
osd advanced bluestore_compression_mode aggressive osd advanced bluestore_throttle_bytes 536870912 osd advanced osd_max_backfills 3
osd advanced osd_op_num_threads_per_shard_ssd 8 * osd advanced osd_scrub_auto_repair true
mds advanced client_oc false
mds advanced client_readahead_max_bytes 4096
mds advanced client_readahead_max_periods 1
mds advanced client_readahead_min 0
mds basic mds_cache_memory_limit 21474836480 client advanced client_oc false
client advanced client_readahead_max_bytes 4096
client advanced client_readahead_max_periods 1
client advanced client_readahead_min 0
client advanced fuse_disable_pagecache false
The cephfs mount options (note that readahead was disabled for this test): /mnt/cephfs type ceph (rw,relatime,name=cephfs,secret=<hidden>,acl,rasize=0)
Any help or pointers are appreciated; this is a major performance issue for us.
Thanks and Regards, Ashu Pachauri
ceph-users mailing list -- ceph-users@ceph.io<mailto:ceph-users@ceph.io> To unsubscribe send an email to ceph-users-leave@ceph.io<mailto: ceph-users-leave@ceph.io> _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io<mailto:ceph-users@ceph.io> To unsubscribe send an email to ceph-users-leave@ceph.io<mailto: ceph-users-leave@ceph.io>
-- Best Regards,
Xiubo Li (李秀波)
Email: xiubli@redhat.com/xiubli@ibm.com< http://xiubli@redhat.com/xiubli@ibm.com> Slack: @Xiubo Li