On Mon, Apr 27, 2020 at 11:21 AM Patrick Dowler <pdowler.cadc@gmail.com> wrote:
I am trying to manually create a radosgw instance for a small development installation. I was able to muddle through and get a working mon, mgr, and osd (x2), but the docs for radosgw are based on ceph-deploy which is not part of the octopus release.
Here are the steps I did two weeks ago on CentOS 7 for Nautilus. I have not tried Octopus manually yet. # Install RGW: yum -y install ceph-radosgw mkdir -p /var/lib/ceph/radosgw/ceph-rgw.ceph1 # My /etc/ceph/ceph.conf file: ------- [global] fsid = cbc2b0e2-ed16-4f09-8578-f8c962b1a0ef mon initial members = ceph1 mon host = 192.168.2.101 public network = 192.168.2.0/24 cluster network = 192.168.2.0/24 [client.rgw.ceph1] host = ceph1 rgw frontends = "civetweb port=80" # Uncomment this to write RGW logs: # log file = /var/log/ceph/ceph-rgw.log # Note: set up wildcard DNS for "*.ceph.example.com" this to work: rgw resolve cname = true rgw dns name = ceph.example.com --------- # Create RGW keyring: ceph auth get-or-create client.rgw.ceph1 osd 'allow rwx' mon 'allow rw' -o /var/lib/ceph/radosgw/ceph-rgw.ceph1/keyring # Ensure permissions are correct: chown -R ceph:ceph /var/lib/ceph/radosgw/ # Configure RGW as "done": sudo -u ceph touch /var/lib/ceph/radosgw/ceph-rgw.ceph1/done # Start the service: systemctl enable --now ceph-radosgw@rgw.ceph1 # Create a RGW user: radosgw-admin user create --uid=kdreyer --display-name="Ken Dreyer" --email=kdreyer@example.com ------ Then, on the s3 client: # Write our config file: s3cmd --no-ssl --access_key=ASDF123456 --secret_key=FOOBAR123 --host=ceph.example.com --host-bucket="%(bucket)s.ceph.example.com" --dump-config > $HOME/.s3cfg # Make a "kdreyer" bucket s3cmd mb s3://kdreyer # Make the whole bucket public: s3cmd setacl s3://kdreyer/ --acl-public # Upload a test file: echo "Hello World" > /tmp/hello.txt s3cmd put /tmp/hello.txt s3://kdreyer # Fetch file: curl http://kdreyer.ceph.example.com/hello.txt