Hi, can you share the output of storage01:~ # ceph orch ls osd Thanks, Eugen Zitat von Wyll Ingersoll <wyllys.ingersoll@keepertech.com>:
When adding a new OSD to a ceph orchestrated system (16.2.9) on a storage node that has a specification profile that dictates which devices to use as the db_devices (SSDs), the newly added OSDs seem to be ignoring the db_devices (there are several available) and putting the data and db/wal on the same device.
We installed the new disk (HDD) and then ran "ceph orch device zap /dev/xyz --force" to initialize the addition process. The OSDs that were added originally on that node were layed out correctly, but the new ones seem to be ignoring the OSD service spec.
How can we make sure the new devices added are layed out correctly?
thanks, Wyllys
_______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io