Thanks Robert (sorry about the delay in replying) :-) On 29/02/2024 01:03, Robert W. Eckert wrote:
I have it working on my machines- the global configuration for me looks like [global] fsid = fe3a7cb0-69ca-11eb-8d45-c86000d08867 mon_host = [v2:192.168.2.142:3300/0,v1:192.168.2.142:6789/0] [v2:192.168.2.141:3300/0,v1:192.168.2.141:6789/0] [v2:192.168.2.199:3300/0,v1:192.168.2.199:6789/0] auth_cluster_required = cephx auth_service_required = cephx auth_client_required = cephx
The important thing for me was to add the FSID, and the auth sections
Also note the port is the 6789 not 3300.
-----Original Message----- From: duluxoz<duluxoz@gmail.com> Sent: Wednesday, February 28, 2024 4:05 AM To:ceph-users@ceph.io Subject: [ceph-users] CephFS On Windows 10
Hi All,
I'm looking for some pointers/help as to why I can't get my Win10 PC to connect to our Ceph Cluster's CephFS Service. Details are as follows:
Ceph Cluster:
- IP Addresses: 192.168.1.10, 192.168.1.11, 192.168.1.12
- Each node above is a monitor & an MDS
- Firewall Ports: open (ie 3300, etc)
- CephFS System Name: my_cephfs
- Log files: nothing jumps out at me
Windows PC:
- Keyring file created and findable: ceph.client.me.keyring
- dokany installed
- ceph-for-windows installed
- Can ping all three ceph nodes
- Connection command: ceph-dokan -l v -o -id me --debug --client_fs my_cephfs -c C:\ProgramData\Ceph\ceph.conf
Ceph.conf contents:
~~~
[global] mon_host = 192.168.1.10, 192.168.1.11, 192.168.1.12 log to stderr = true log to syslog = true run dir = C:/ProgramData/ceph crash dir = C:/logs/ceph debug client = 2 [client] keyring = C:/ProgramData/ceph/ceph.client.me.keyring log file = C:/logs/ceph/$name.$pid.log admin socket = C:/ProgramData/ceph/$name.$pid.asok ~~~
Windows Logfile contents (ieC:/logs/ceph/client.me.NNNN.log):
~~~
2024-02-28T18:26:45.201+1100 1 0 monclient(hunting): authenticate timed out after 300 2024-02-28T18:31:45.203+1100 1 0 monclient(hunting): authenticate timed out after 300 2024-02-28T18:36:45.205+1100 1 0 monclient(hunting): authenticate timed out after 300
~~~
Additional info from Windows CLI:
~~~
failed to fetch mon config (--no-mon-config to skip)
~~~
So I've gone through the doco and done some Google-foo and I can't work out *why* I'm getting a failure; why I'm getting the authentication failure. I know it'll be something simple, something staring me in the face, but I'm at the point where I can't see the forest for the trees - please help.
Any help greatly appreciated
Thanks in advance
Cheers
Dulux-Oz _______________________________________________ ceph-users mailing list --ceph-users@ceph.io To unsubscribe send an email toceph-users-leave@ceph.io -- Peregrine IT Signature
*Matthew J BLACK* M.Inf.Tech.(Data Comms) MBA B.Sc. MACS (Snr), CP, IP3P When you want it done /right/ ‒ the first time! Phone: +61 4 0411 0089 Email: matthew@peregrineit.net <mailto:matthew@peregrineit.net> Web: www.peregrineit.net <http://www.peregrineit.net> View Matthew J BLACK's profile on LinkedIn <http://au.linkedin.com/in/mjblack> This Email is intended only for the addressee. Its use is limited to that intended by the author at the time and it is not to be distributed without the author’s consent. You must not use or disclose the contents of this Email, or add the sender’s Email address to any database, list or mailing list unless you are expressly authorised to do so. Unless otherwise stated, Peregrine I.T. Pty Ltd accepts no liability for the contents of this Email except where subsequently confirmed in writing. The opinions expressed in this Email are those of the author and do not necessarily represent the views of Peregrine I.T. Pty Ltd. This Email is confidential and may be subject to a claim of legal privilege. If you have received this Email in error, please notify the author and delete this message immediately.