- ceph-users - lists.ceph.io

回复：Re: How to build ceph without QAT?
by 张东川 06 Mar '24

06 Mar '24

Hi Hualong and llya, Thanks for your help. More info: I am trying to buid ceph on Milkv Pioneer board (RISCV arch, OS is fedora-riscv 6.1.55). The ceph code being used was downloaded from github last week (master branch) Currently I am working on environment cleanup (I suspect my work environment is not clean). I will try to switch to V19.0.0 and rebuild. Will let you know if further help needed. Thanks. Best Regards, Dongchuan Ilya Dryomov<idryomov(a)gmail.xn--com> -8s7w 2024年3月6日周三 21:13 写道： On Wed, Mar 6, 2024 at 7:41 AM Feng, Hualong <hualong.feng(a)intel.com> wrote: > > Hi Dongchuan > > Could I know which version or which commit that you are building and your environment: system, CPU, kernel? > > ./do_cmake.sh -DCMAKE_BUILD_TYPE=RelWithDebInfo   this command should be OK without QAT. Hi Hualong, I don't think this is true.  In main, both WITH_QATLIB and WITH_QATZIP default to ON unless the system is aarch64.  IIRC I needed to append -D WITH_QATLIB=OFF -D WITH_QATZIP=OFF to build without QAT. Thanks,                 Ilya > > Thanks > -Hualong > > > -----Original Message----- > > From: 张东川 <zhangdongchuan(a)metastonecorp.com> > > Sent: Wednesday, March 6, 2024 9:51 AM > > To: ceph-users <ceph-users(a)ceph.io> > > Subject: [ceph-users] How to build ceph without QAT? > > > > Hi guys, > > > > > > I tried both following commands. > > Neither of them worked. > > > > > > "./do_cmake.sh -DCMAKE_BUILD_TYPE=RelWithDebInfo -DWITH_QAT=OFF > > -DWITH_QATDRV=OFF -DWITH_QATZIP=OFF" > > "ARGS="-DWITH_QAT=OFF -DWITH_QATDRV=OFF - > > DWITH_QATZIP=OFF" ./do_cmake.sh - > > DCMAKE_BUILD_TYPE=RelWithDebInfo" > > > > > > I still see errors like: > > make[1]: *** [Makefile:4762: > > quickassist/lookaside/access_layer/src/sample_code/performance/framew > > ork/linux/user_space/cpa_sample_code-cpa_sample_code_utils.o] Error 1 > > > > > > > > > > So what's the proper way to configure build commands? > > Thanks a lot. > > > > > > Best Regards, > > Dongchuan > > _______________________________________________ > > ceph-users mailing list -- ceph-users(a)ceph.io To unsubscribe send an email > > to ceph-users-leave(a)ceph.io > _______________________________________________ > ceph-users mailing list -- ceph-users(a)ceph.io > To unsubscribe send an email to ceph-users-leave(a)ceph.io _______________________________________________ ceph-users mailing list -- ceph-users(a)ceph.io To unsubscribe send an email to ceph-users-leave(a)ceph.io

1 0

change ip node and public_network in cluster
by farhad kh 06 Mar '24

06 Mar '24

I have implemented a ceph cluster with cephadm which has three monitors and three OSDs each node have one interface 192.168.0.0/24 network. I want to change the address of the machines to the range 10.4.4.0/24. Is there a solution for this change without data loss and failure? i change the pubic_network in mon and change the ip node but its not worked . how can i sovle this problem? ``` ceph orch host ls HOST ADDR LABELS STATUS ceph-01 192.168.0.130 _admin,rgw ceph-02 192.168.0.131 _admin,rgw ceph-03 192.168.0.132 _admin,rgw 3 hosts in cluster ```` [root@ceph-01 ~]# ceph config get mon public_network 192.168.0.0/24 ```` [root@ceph-01 ~]# ceph orch ls NAME PORTS RUNNING REFRESHED AGE PLACEMENT alertmanager ?:9093,9094 1/1 112s ago 9M count:1 ceph-exporter 3/3 114s ago 8M * crash 3/3 114s ago 9M * grafana ?:3000 1/1 112s ago 8M count:1 mgr 2/2 113s ago 9M count:2 mon 3/3 114s ago 8M count:3 node-exporter ?:9100 3/3 114s ago 9M * osd.dashboard-admin-1685787597651 6 114s ago 8M * prometheus ?:9095 1/1 112s ago 3M count:1 ````

3 3

Ceph Leadership Team Meeting Minutes - March 6, 2024
by Ernesto Puerta 06 Mar '24

06 Mar '24

Hi Cephers, These are the topics covered in today's meeting: - *Releases* - *Hot fixes Releases* - *18.2.2* - https://github.com/ceph/ceph/pull/55491 - reef: mgr/prometheus: fix orch check to prevent Prometheus crash - https://github.com/ceph/ceph/pull/55709 - reef: debian/*.postinst: add adduser as a dependency and specify --home when adduser - https://github.com/ceph/ceph/pull/55712 - reef: src/osd/OSDMap.cc: Fix encoder to produce same bytestream - [Laura] When/who can upgrade the LRC for this release? (Dan will after we do some last checks today) - Gibba has been upgraded with no apparent issues - *17.2.8* (on hold based on whether the osdmap fix requirement) - *No longer needed* - osdmap fix (not needed: https://github.com/ceph/ceph/blob/quincy/src/osd/OSDMap.cc#L3087-L3089) - Rook requests to include this c-v fix that blocks OSDs in some scenarios (not worthy of its own hotfix, just please include if we do the hotfix) - https://github.com/ceph/ceph/pull/54522 - quincy: ceph-volume: fix a regression in raw list - As crc fix is not needed, the Rook request can be included in a regular quincy release - *Regular releases* - *18.2.3* - exporter fixes for rook and debian-derived users make this more urgent than quincy - mgr usage of pyO3/cryptography an issue for debian - and possibly centos9 (https://tracker.ceph.com/issues/64213#note-2) - see notes from 02/07 - Any updates on potentially dropping modules or another fix? Adam? - Squid *19.1.0* - CephFS waiting for 2 feature PR - RGW PRs - NVMe? To be confirmed with Aviv - squid blockers: - build centos 9 containers: https://github.com/ceph/ceph-container/pull/2183 - ceph-object-corpus: https://github.com/ceph/ceph-object-corpus/pull/17 (testing in https://github.com/ceph/ceph/pull/54735) - Milestone for squid blockers (use to tag blockers for the first 19.1.0 RC): https://github.com/ceph/ceph/milestone/21 - Squid RCs and community testing - https://pad.ceph.com/p/squid_scale_testing - Target date March ~20 - *17.2.9* - need jammy builds for quincy before a squid release. maybe we can just build them for the 17.2.7 release? (do you mean the 17.2.8 release?) - *Meeting time - *change days to Monday or Thursday? (added by Josh - who has a conflict on Wednesdays now) - Thursday has several conflicting community meetings - Any objections to Monday at the same time? - Note the change to US daylight savings next week - Let's do a poll (Doodle) - *debian-reef_OLD email thread "[ceph-users] debian-reef_OLD?"* - Fixed by Yuri - *CDM APAC tonight*: https://tracker.ceph.com/projects/ceph/wiki/CDM_06-MAR-2024 - *Sepia Lab*: - PSA: https://github.com/ceph/ceph/pull/55820 merged (squid crontab additions and overhaul to nightlies) - New grafana widget for smithi node utilization: - https://grafana-route-grafana.apps.os.sepia.ceph.com/d/teuthology/teutholog… - (Basically: unlocked machine * hours / total machine * hours ) - [Zac] *ceph-exporter release notes question from Jan Horacek* (from the upstream community) - Route to Juanmi Olmo - [Zac] - *Eugen Block's question about removing sensitive information from ceph-users mailing list* - No easy way to request/remove sensitive information. - [Zac] - *Anthony D'Atri submits Index HQ in Toronto as a possible venue for Cephalocon 2024* - Venue already booked (Patrick) - [Zac] - *CQ issue 4 -- submit your requests before 25 Mar 2024* -- zac.dover(a)proton.me Kind Regards, Ernesto Puerta

1 0

Ceph reef mon is not starting after host reboot
by ankit＠eurus.net 06 Mar '24

06 Mar '24

Hi guys, i am very newbie to ceph-cluster but after multiple attempts, i was able to install ceph-reef cluster on debian-12 by cephadm tool on test environment with 2 mons and 3 OSD's om VM's. All was seeming good and i was exploring more about it so i rebooted cluster and found that now i am not able to access ceph dashboard and i have try to check this root@ceph-mon-01:/# ceph orch ls 2024-03-01T08:53:05.051+0000 7ff7602b8700 0 monclient(hunting): authenticate timed out after 300 [errno 110] RADOS timed out (error connecting to the cluster) i have not configured RADOS. And i have no clue about it. Any help would be very appreciated? the same issue.

2 1

Ceph storage project for virtualization
by egoitz＠ramattack.net 06 Mar '24

06 Mar '24

Hi! I have been reading some ebooks of Ceph and some doc and learning about it. The goal of all it, is the fact of creating a rock solid storage por virtual machines. After all the learning I have not been able to answer by myself to this question so I was wondering if perhaps you could clarify my doubt. Let's imagine three datacenters, each one with for instance, 4 virtualization hosts. As I was planning to build a solution for diferent hypervisors I have been thinking in the following env. - I planed to have my Ceph storage (with different pools inside) with OSDs in three different datacenters (as failure point). - Each datacenter's hosts, will be accessing to a NFS redundant service in the own datacenter. - Each NFS redundant service of each datacenter will be composed by two NFS gateways accessing to the OSDs of the placement group located in the own datacenter. I planned achieving this with OSD weights and getting with that the fact that the crush algorithm to build the map so that each datacenter accesses end up having as master, the OSD of the own datacenter in the placement group. Obviously, slave OSD replicas will exist in the other three datacenters or even I don't discard the fact of using erasure coding in some manner. - The NFS gateways could be a NFS redundant gateway service from Ceph (I have seen now they have developed something for this purpose https://docs.ceph.com/en/quincy/mgr/nfs/) or perhaps two different Debian machines, accessing to Ceph with rados and sharing to the hypervisors that information over NFS. In case of Debian machines I have heard good results using pacemaker/corosync for providing HA to that NFS (between 0,5 and 3 seconds for fail over and service up again). What do you think about this plan?. Do you see it feasible?. We will work too with KVM and there we could access to Ceph directly but I would needed to provide too storage por Xen and Vmware. Thank you so much in advance, Cheers!

2 4

Re: How to build ceph without QAT?
by Feng, Hualong 06 Mar '24

06 Mar '24

Hi Dongchuan Could I know which version or which commit that you are building and your environment: system, CPU, kernel? ./do_cmake.sh -DCMAKE_BUILD_TYPE=RelWithDebInfo this command should be OK without QAT. Thanks -Hualong > -----Original Message----- > From: 张东川 <zhangdongchuan(a)metastonecorp.com> > Sent: Wednesday, March 6, 2024 9:51 AM > To: ceph-users <ceph-users(a)ceph.io> > Subject: [ceph-users] How to build ceph without QAT? > > Hi guys, > > > I tried both following commands. > Neither of them worked. > > > "./do_cmake.sh -DCMAKE_BUILD_TYPE=RelWithDebInfo -DWITH_QAT=OFF > -DWITH_QATDRV=OFF -DWITH_QATZIP=OFF" > "ARGS="-DWITH_QAT=OFF -DWITH_QATDRV=OFF - > DWITH_QATZIP=OFF" ./do_cmake.sh - > DCMAKE_BUILD_TYPE=RelWithDebInfo" > > > I still see errors like: > make[1]: *** [Makefile:4762: > quickassist/lookaside/access_layer/src/sample_code/performance/framew > ork/linux/user_space/cpa_sample_code-cpa_sample_code_utils.o] Error 1 > > > > > So what's the proper way to configure build commands? > Thanks a lot. > > > Best Regards, > Dongchuan > _______________________________________________ > ceph-users mailing list -- ceph-users(a)ceph.io To unsubscribe send an email > to ceph-users-leave(a)ceph.io

2 1

Monitoring Ceph Bucket and overall ceph cluster remaining space
by Michael Worsham 06 Mar '24

06 Mar '24

Is there an easy way to poll the ceph cluster buckets in a way to see how much space is remaining? And is it possible to see how much ceph cluster space is remaining overall? I am trying to extract the data from our Ceph cluster and put it into a format that our SolarWinds can understand in whole number integers, so we can monitor bucket allocated space and overall cluster space in the cluster as a whole. Via Canonical support, the said I can do something like "sudo ceph df -f json-pretty" to pull the information, but what is it I need to look at from the output (see below) to display over to SolarWinds? { "stats": { "total_bytes": 960027263238144, "total_avail_bytes": 403965214187520, "total_used_bytes": 556062049050624, "total_used_raw_bytes": 556062049050624, "total_used_raw_ratio": 0.57921481132507324, "num_osds": 48, "num_per_pool_osds": 48, "num_per_pool_omap_osds": 48 }, "stats_by_class": { "ssd": { "total_bytes": 960027263238144, "total_avail_bytes": 403965214187520, "total_used_bytes": 556062049050624, "total_used_raw_bytes": 556062049050624, "total_used_raw_ratio": 0.57921481132507324 } }, And a couple of data pools... { "name": "default.rgw.jv-va-pool.data", "id": 65, "stats": { "stored": 4343441915904, "objects": 17466616, "kb_used": 12774490932, "bytes_used": 13081078714368, "percent_used": 0.053900588303804398, "max_avail": 76535973281792 } }, { "name": "default.rgw.jv-va-pool.index", "id": 66, "stats": { "stored": 42533675008, "objects": 401, "kb_used": 124610380, "bytes_used": 127601028363, "percent_used": 0.00055542576592415571, "max_avail": 76535973281792 } }, This message and its attachments are from Data Dimensions and are intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately and permanently delete the original email and destroy any copies or printouts of this email as well as any attachments.

2 4

InvalidAccessKeyId
by ashar.khan＠rapidcompute.com 06 Mar '24

06 Mar '24

Dear Team, I am facing one issue, which could be a possible bug, but not able to find any solution. We are unable to create a bucket on ceph from ceph-dashboard. Bucket is getting created with a fresh/different name but once I am trying with a deleted bucket name then it is not getting created. I have tested on (Octopus and Pacific version). Steps to reproduce. a. Create user RGW user from ceph Dashboard. (user1) b. Create a bucket with the bucket owner as user1. (bucket1) c. Delete the bucket d Delete user. e. Create a user again with the same name (user1) f. Create a new bucket with the bucket owner as user1. (Bucket2) I get below error message: RGW REST API failed request with status code 403 (b'{"Code":"InvalidAccessKeyId","RequestId":"tx00000457ff5169168a9e3-00648afcd0' b'-fdd1c2-dev","HostId":"fdd1c2-dev-india"}')

1 0

How to build ceph without QAT?
by 张东川 05 Mar '24

05 Mar '24

Hi guys, I tried both following commands. Neither of them worked. "./do_cmake.sh -DCMAKE_BUILD_TYPE=RelWithDebInfo -DWITH_QAT=OFF -DWITH_QATDRV=OFF -DWITH_QATZIP=OFF" "ARGS="-DWITH_QAT=OFF -DWITH_QATDRV=OFF -DWITH_QATZIP=OFF" ./do_cmake.sh -DCMAKE_BUILD_TYPE=RelWithDebInfo" I still see errors like: make[1]: *** [Makefile:4762: quickassist/lookaside/access_layer/src/sample_code/performance/framework/linux/user_space/cpa_sample_code-cpa_sample_code_utils.o] Error 1 So what's the proper way to configure build commands? Thanks a lot. Best Regards, Dongchuan

1 0

debian-reef_OLD?
by Daniel Brown 05 Mar '24

05 Mar '24

I likely missed an announcement, and if so, please forgive me. I’m seeing some failure for when running apt on a cluster of ubuntu machines — looks like a directory has changed on https://download.ceph.com/ Was: debian-reef/ Now appears to be: debian-reef_OLD/ Was reef pulled?

4 4