I have tried on-and-off all morning to get the magical combination of rsync flags to get this working and I don't think it's possible. The plan is, for each version released, have that version go in its respective /rpm-X.X.X directory. Once all the packages are pushed, the /rpm-octopus symlink is then pointed to the new version rpm-X.X.X dir. @Sage what are your thoughts on rsyncd currently being broken due to this new directory structure? It has also broken our mirror syncing procedure. e.g., http://au.ceph.com/ doesn't have {deb,rpm}-octopus dirs. On 3/24/20 1:32 PM, Eric Goirand wrote: > Thanks Abhishek for the rpm-15.2.0 link. > @David are there any plans to have rsync still work with rpm-octopus as > it is the case for http access ? > If you plan to move to rpm-15.2.0, would it still be the same directory > when you go to 15.2.1 or 15.2.x as it will be difficult to change the > DNF or YUM URLs to cope with these changes. > Thanks and Regards, > Eric. > > On Tue, Mar 24, 2020 at 3:10 PM Abhishek Lekshmanan &lt;abhishek(a)suse.com > <mailto:abhishek@suse.com>> wrote: > > Eric Goirand &lt;egoirand(a)redhat.com <mailto:egoirand@redhat.com>> writes: > > > Hello Abhishek, > Hi Eric > > > > Many Many Thanks to all the contributors for this awesome milestone ! > > Two thumbs up to you all ! > > The directory structure changed (buried somewhere in the release > announcment) mainly so that we can make it easy to retire a bad release > etc. so rpm-octopus should be a symlink to > https://download.ceph.com/rpm-15.2.0/ > > I've CC'ed David who's in charge of the infra. > > > > Note however that the Octopus repository via rsync is no longer > accessible : > > rsync -aiv --dry-run rsync://download.ceph.com/ceph/rpm-octopus/ > <http://download.ceph.com/ceph/rpm-octopus/> . > > receiving incremental file list > > rsync: change_dir "/rpm-octopus" (in ceph) failed: No such file or > > directory (2) > > > > But, is still accessible using http : > http://download.ceph.com/rpm-octopus/ > > > > Would you know who to contact to have the rsync access work again ? > > > > Many Thanks, > > > > Eric. > > > > > > On Tue, Mar 24, 2020 at 12:41 PM Abhishek Lekshmanan > &lt;abhishek(a)suse.com <mailto:abhishek@suse.com>> > > wrote: > > > >> > >> We're happy to announce the first stable release of Octopus v15.2.0. > >> There are a lot of changes and new features added, we advise > everyone to > >> read the release notes carefully, and in particular the upgrade > notes, > >> before upgrading. Please refer to the official blog entry > >> https://ceph.io/releases/v15-2-0-octopus-released/ for a detailed > >> version with links & changelog. > >> > >> This release wouldn't have been possible without the support of the > >> community, this release saw contributions from over 330 > developers & 80 > >> organizations, and we thank everyone for making this release happen. > >> > >> Major Changes from Nautilus > >> --------------------------- > >> General > >> ~~~~~~~ > >> * A new deployment tool called **cephadm** has been introduced that > >>   integrates Ceph daemon deployment and management via containers > >>   into the orchestration layer. > >> * Health alerts can now be muted, either temporarily or permanently. > >> * Health alerts are now raised for recent Ceph daemons crashes. > >> * A simple 'alerts' module has been introduced to send email > >>   health alerts for clusters deployed without the benefit of an > >>   existing external monitoring infrastructure. > >> * Packages are built for the following distributions: > >>   - CentOS 8 > >>   - CentOS 7 (partial--see below) > >>   - Ubuntu 18.04 (Bionic) > >>   - Debian Buster > >>   - Container images (based on CentOS 8) > >> > >>   Note that the dashboard, prometheus, and restful manager modules > >>   will not work on the CentOS 7 build due to Python 3 module > >>   dependencies that are missing in CentOS 7. > >> > >>   Besides this packages built by the community will also > available for the > >>   following distros: > >>   - Fedora (33/rawhide) > >>   - openSUSE (15.2, Tumbleweed) > >> > >> Dashboard > >> ~~~~~~~~~ > >> The mgr-dashboard has gained a lot of new features and functionality: > >> > >> * UI Enhancements > >>   - New vertical navigation bar > >>   - New unified sidebar: better background task and events > notification > >>   - Shows all progress mgr module notifications > >>   - Multi-select on tables to perform bulk operations > >> > >> * Dashboard user account security enhancements > >>   - Disabling/enabling existing user accounts > >>   - Clone an existing user role > >>   - Users can change their own password > >>   - Configurable password policies: Minimum password > complexity/length > >>     requirements > >>   - Configurable password expiration > >>   - Change password after first login > >> > >> New and enhanced management of Ceph features/services: > >> > >> * OSD/device management > >>   - List all disks associated with an OSD > >>   - Add support for blinking enclosure LEDs via the orchestrator > >>   - List all hosts known by the orchestrator > >>   - List all disks and their properties attached to a node > >>   - Display disk health information (health prediction and SMART > data) > >>   - Deploy new OSDs on new disks/hosts > >>   - Display and allow sorting by an OSD's default device class in > the OSD > >>     table > >>   - Explicitly set/change the device class of an OSD, display and > sort > >> OSDs by > >>     device class > >> > >> * Pool management > >>   - Viewing and setting pool quotas > >>   - Define and change per-pool PG autoscaling mode > >> > >> * RGW management enhancements > >>   - Enable bucket versioning > >>   - Enable MFA support > >>   - Select placement target on bucket creation > >> > >> * CephFS management enhancements > >>   - CephFS client eviction > >>   - CephFS snapshot management > >>   - CephFS quota management > >>   - Browse CephFS directory > >> > >> * iSCSI management enhancements > >>   - Show iSCSI GW status on landing page > >>   - Prevent deletion of IQNs with open sessions > >>   - Display iSCSI "logged in" info > >> > >> * Prometheus alert management > >>   - List configured Prometheus alerts > >> > >> RADOS > >> ~~~~~ > >> * Objects can now be brought in sync during recovery by copying only > >>   the modified portion of the object, reducing tail latencies during > >>   recovery. > >> * Ceph will allow recovery below *min_size* for Erasure coded pools, > >>   wherever possible. > >> * The PG autoscaler feature introduced in Nautilus is enabled for > >>   new pools by default, allowing new clusters to autotune *pg num* > >>   without any user intervention.  The default values for new pools > >>   and RGW/CephFS metadata pools have also been adjusted to perform > >>   well for most users. > >> * BlueStore has received several improvements and performance > >>   updates, including improved accounting for "omap" (key/value) > >>   object data by pool, improved cache memory management, and a > >>   reduced allocation unit size for SSD devices.  (Note that by > >>   default, the first time each OSD starts after upgrading to octopus > >>   it will trigger a conversion that may take from a few minutes to a > >>   few hours, depending on the amount of stored "omap" data.) > >> * Snapshot trimming metadata is now managed in a more efficient and > >>   scalable fashion. > >> > >> RBD block storage > >> ~~~~~~~~~~~~~~~~~ > >> * Mirroring now supports a new snapshot-based mode that no longer > requires > >>   the journaling feature and its related impacts in exchange for > the loss > >>   of point-in-time consistency (it remains crash consistent). > >> * Clone operations now preserve the sparseness of the underlying > RBD image. > >> * The trash feature has been improved to (optionally) automatically > >>   move old parent images to the trash when their children are all > >>   deleted or flattened. > >> * The trash can be configured to automatically purge on a defined > schedule. > >> * Images can be online re-sparsified to reduce the usage of > zeroed extents. > >> * The `rbd-nbd` tool has been improved to use more modern kernel > >> interfaces. > >> * Caching has been improved to be more efficient and performant. > >> * `rbd-mirror` automatically adjusts its per-image memory usage based > >>   upon its memory target. > >> * A new persistent read-only caching daemon is available to > offload reads > >> from > >>   shared parent images. > >> > >> RGW object storage > >> ~~~~~~~~~~~~~~~~~~ > >> * New `Multisite Sync Policy` primitives for per-bucket replication. > >> (EXPERIMENTAL) > >> * S3 feature support: > >>     - Bucket Replication (EXPERIMENTAL) > >>     - `Bucket Notifications`_ via HTTP/S, AMQP and Kafka > >>     - Bucket Tagging > >>     - Object Lock > >>     - Public Access Block for buckets > >> * Bucket sharding: > >>     - Significantly improved listing performance on buckets with many > >> shards. > >>     - Dynamic resharding prefers prime shard counts for improved > >> distribution. > >>     - Raised the default number of bucket shards to 11. > >> * Added `HashiCorp Vault Integration`_ for SSE-KMS. > >> * Added Keystone token cache for S3 requests. > >> > >> CephFS distributed file system > >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >> * Inline data support in CephFS has been deprecated and will > likely be > >>   removed in a future release. > >> * MDS daemons can now be assigned to manage a particular file > system via > >> the > >>   new `mds_join_fs` option. > >> * MDS now aggressively asks idle clients to trim caps which improves > >> stability > >>   when file system load changes. > >> * The mgr volumes plugin has received numerous improvements to > support > >> CephFS > >>   via CSI, including snapshots and cloning. > >> * cephfs-shell has had numerous incremental improvements and bug > fixes. > >> > >> > >> Upgrading from Mimic or Nautilus > >> -------------------------------- > >>   You can monitor the progress of your upgrade at each stage with the > >>   `ceph versions` command, which will tell you what ceph > version(s) are > >>   running for each type of daemon. > >> > >> Instructions > >> ~~~~~~~~~~~~ > >> #. Make sure your cluster is stable and healthy (no down or > >>    recovering OSDs).  (Optional, but recommended.) > >> > >> #. Set the `noout` flag for the duration of the upgrade. (Optional, > >>    but recommended.):: > >> > >>      # ceph osd set noout > >> > >> #. Upgrade monitors by installing the new packages and restarting the > >>    monitor daemons.  For example, on each monitor host,:: > >> > >>      # systemctl restart ceph-mon.target > >> > >>    Once all monitors are up, verify that the monitor upgrade is > >>    complete by looking for the `octopus` string in the mon > >>    map.  The command:: > >> > >>      # ceph mon dump | grep min_mon_release > >> > >>    should report:: > >> > >>      min_mon_release 15 (nautilus) > >> > >>    If it doesn't, that implies that one or more monitors hasn't been > >>    upgraded and restarted and/or the quorum does not include all > monitors. > >> > >> #. Upgrade `ceph-mgr` daemons by installing the new packages and > >>    restarting all manager daemons.  For example, on each manager > host,:: > >> > >>      # systemctl restart ceph-mgr.target > >> > >>    Verify the `ceph-mgr` daemons are running by checking `ceph > >>    -s`:: > >> > >>      # ceph -s > >> > >>      ... > >>        services: > >>         mon: 3 daemons, quorum foo,bar,baz > >>         mgr: foo(active), standbys: bar, baz > >>      ... > >> > >> #. Upgrade all OSDs by installing the new packages and restarting the > >>    ceph-osd daemons on all OSD hosts:: > >> > >>      # systemctl restart ceph-osd.target > >> > >>    Note that the first time each OSD starts, it will do a format > >>    conversion to improve the accounting for "omap" data.  This may > >>    take a few minutes to as much as a few hours (for an HDD with lots > >>    of omap data).  You can disable this automatic conversion with:: > >> > >>      # ceph config set osd bluestore_fsck_quick_fix_on_mount false > >> > >>    You can monitor the progress of the OSD upgrades with the > >>    `ceph versions` or `ceph osd versions` commands:: > >> > >>      # ceph osd versions > >>      { > >>         "ceph version 13.2.5 (...) mimic (stable)": 12, > >>         "ceph version 15.2.0 (...) octopus (stable)": 22, > >>      } > >> > >> #. Upgrade all CephFS MDS daemons.  For each CephFS file system, > >> > >>    #. Reduce the number of ranks to 1.  (Make note of the original > >>       number of MDS daemons first if you plan to restore it later.):: > >> > >>         # ceph status > >>         # ceph fs set <fs_name> max_mds 1 > >> > >>    #. Wait for the cluster to deactivate any non-zero ranks by > >>       periodically checking the status:: > >> > >>         # ceph status > >> > >>    #. Take all standby MDS daemons offline on the appropriate > hosts with:: > >> > >>         # systemctl stop ceph-mds@<daemon_name> > >> > >>    #. Confirm that only one MDS is online and is rank 0 for your FS:: > >> > >>         # ceph status > >> > >>    #. Upgrade the last remaining MDS daemon by installing the new > >>       packages and restarting the daemon:: > >> > >>         # systemctl restart ceph-mds.target > >> > >>    #. Restart all standby MDS daemons that were taken offline:: > >> > >>         # systemctl start ceph-mds.target > >> > >>    #. Restore the original value of `max_mds` for the volume:: > >> > >>         # ceph fs set <fs_name> max_mds <original_max_mds> > >> > >> #. Upgrade all radosgw daemons by upgrading packages and restarting > >>    daemons on all hosts:: > >> > >>      # systemctl restart ceph-radosgw.target > >> > >> #. Complete the upgrade by disallowing pre-Octopus OSDs and enabling > >>    all new Octopus-only functionality:: > >> > >>      # ceph osd require-osd-release octopus > >> > >> #. If you set `noout` at the beginning, be sure to clear it with:: > >> > >>      # ceph osd unset noout > >> > >> #. Verify the cluster is healthy with `ceph health`. > >> > >>    If your CRUSH tunables are older than Hammer, Ceph will now > issue a > >>    health warning.  If you see a health alert to that effect, you can > >>    revert this change with:: > >> > >>      ceph config set mon mon_crush_min_required_version firefly > >> > >>    If Ceph does not complain, however, then we recommend you also > >>    switch any existing CRUSH buckets to straw2, which was added back > >>    in the Hammer release.  If you have any 'straw' buckets, this will > >>    result in a modest amount of data movement, but generally nothing > >>    too severe.:: > >> > >>      ceph osd getcrushmap -o backup-crushmap > >>      ceph osd crush set-all-straw-buckets-to-straw2 > >> > >>    If there are problems, you can easily revert with:: > >> > >>      ceph osd setcrushmap -i backup-crushmap > >> > >>    Moving to 'straw2' buckets will unlock a few recent features, like > >>    the `crush-compat` :ref:`balancer <balancer>` mode added back in > >> Luminous. > >> > >> #. If you are upgrading from Mimic, or did not already do so when you > >>    upgraded to Nautlius, we recommened you enable the new :ref:`v2 > >>    network protocol <msgr2>`, issue the following command:: > >> > >>      ceph mon enable-msgr2 > >> > >>    This will instruct all monitors that bind to the old default port > >>    6789 for the legacy v1 protocol to also bind to the new 3300 v2 > >>    protocol port.  To see if all monitors have been updated,:: > >> > >>      ceph mon dump > >> > >>    and verify that each monitor has both a `v2:` and `v1:` address > >>    listed. > >> > >> #. Consider enabling the :ref:`telemetry module <telemetry>` to send > >>    anonymized usage statistics and crash information to the Ceph > >>    upstream developers.  To see what would be reported (without > actually > >>    sending any information to anyone),:: > >> > >>      ceph mgr module enable telemetry > >>      ceph telemetry show > >> > >>    If you are comfortable with the data that is reported, you can > opt-in to > >>    automatically report the high-level cluster metadata with:: > >> > >>      ceph telemetry on > >> > >>    For more information about the telemetry module, see :ref:`the > >>    documentation <telemetry>`. > >> > >> > >> Upgrading from pre-Mimic releases (like Luminous) > >> ------------------------------------------------- > >> You *must* first upgrade to Mimic (13.2.z) or Nautilus (14.2.z) > before > >> upgrading to Octopus. > >> > >> > >> Upgrade compatibility notes > >> --------------------------- > >> * Starting with Octopus, there is now a separate repository directory > >>   for each version on `download.ceph.com > <http://download.ceph.com>` (e.g., `rpm-15.2.0` and > >>   `debian-15.2.0`).  The traditional package directory that is named > >>   after the release (e.g., `rpm-octopus` and `debian-octopus`) is > >>   now a symlink to the most recently bug fix version for that > release. > >>   We no longer generate a single repository that combines all bug fix > >>   versions for a single named release. > >> > >> * The RGW "num_rados_handles" has been removed. > >>   If you were using a value of "num_rados_handles" greater than 1 > >>   multiply your current "objecter_inflight_ops" and > >>   "objecter_inflight_op_bytes" paramaeters by the old > >>   "num_rados_handles" to get the same throttle behavior. > >> > >> * Ceph now packages python bindings for python3.6 instead of > >>   python3.4, because python3 in EL7/EL8 is now using python3.6 > >>   as the native python3. see the `announcement`_ > >>   for more details on the background of this change. > >> > >> * librbd now uses a write-around cache policy be default, > >>   replacing the previous write-back cache policy default. > >>   This cache policy allows librbd to immediately complete > >>   write IOs while they are still in-flight to the OSDs. > >>   Subsequent flush requests will ensure all in-flight > >>   write IOs are completed prior to completing. The > >>   librbd cache policy can be controlled via a new > >>   "rbd_cache_policy" configuration option. > >> > >> * librbd now includes a simple IO scheduler which attempts to > >>   batch together multiple IOs against the same backing RBD > >>   data block object. The librbd IO scheduler policy can be > >>   controlled via a new "rbd_io_scheduler" configuration > >>   option. > >> > >> * RGW: radosgw-admin introduces two subcommands that allow the > >>   managing of expire-stale objects that might be left behind after a > >>   bucket reshard in earlier versions of RGW. One subcommand lists > such > >>   objects and the other deletes them. Read the troubleshooting > section > >>   of the dynamic resharding docs for details. > >> > >> * RGW: Bucket naming restrictions have changed and likely to cause > >>   InvalidBucketName errors. We recommend to set > >> `rgw_relaxed_s3_bucket_names` > >>   option to true as a workaround. > >> > >> * In the Zabbix Mgr Module there was a typo in the key being send > >>   to Zabbix for PGs in backfill_wait state. The key that was sent > >>   was 'wait_backfill' and the correct name is 'backfill_wait'. > >>   Update your Zabbix template accordingly so that it accepts the > >>   new key being send to Zabbix. > >> > >> * zabbix plugin for ceph manager now includes osd and pool > >>   discovery. Update of zabbix_template.xml is needed > >>   to receive per-pool (read/write throughput, diskspace usage) > >>   and per-osd (latency, status, pgs) statistics > >> > >> * The format of all date + time stamps has been modified to fully > >>   conform to ISO 8601.  The old format (`YYYY-MM-DD > >>   HH:MM:SS.ssssss`) excluded the `T` separator between the date and > >>   time and was rendered using the local time zone without any > explicit > >>   indication.  The new format includes the separator as well as a > >>   `+nnnn` or `-nnnn` suffix to indicate the time zone, or a `Z` > >>   suffix if the time is UTC.  For example, > >>   `2019-04-26T18:40:06.225953+0100`. > >> > >>   Any code or scripts that was previously parsing date and/or time > >>   values from the JSON or XML structure CLI output should be checked > >>   to ensure it can handle ISO 8601 conformant values.  Any code > >>   parsing date or time values from the unstructured human-readable > >>   output should be modified to parse the structured output > instead, as > >>   the human-readable output may change without notice. > >> > >> * The `bluestore_no_per_pool_stats_tolerance` config option has been > >>   replaced with `bluestore_fsck_error_on_no_per_pool_stats` > >>   (default: false).  The overall default behavior has not changed: > >>   fsck will warn but not fail on legacy stores, and repair will > >>   convert to per-pool stats. > >> > >> * The disaster-recovery related 'ceph mon sync force' command has > been > >>   replaced with 'ceph daemon <...> sync_force'. > >> > >> * The `osd_recovery_max_active` option now has > >>   `osd_recovery_max_active_hdd` and `osd_recovery_max_active_ssd` > >>   variants, each with different default values for HDD and SSD-backed > >>   OSDs, respectively.  By default `osd_recovery_max_active` now > >>   defaults to zero, which means that the OSD will conditionally use > >>   the HDD or SSD option values.  Administrators who have customized > >>   this value may want to consider whether they have set this to a > >>   value similar to the new defaults (3 for HDDs and 10 for SSDs) and, > >>   if so, remove the option from their configuration entirely. > >> > >> * monitors now have a `ceph osd info` command that will provide > information > >>   on all osds, or provided osds, thus simplifying the process of > having to > >>   parse `osd dump` for the same information. > >> > >> * The structured output of `ceph status` or `ceph -s` is now more > >>   concise, particularly the `mgrmap` and `monmap` sections, and the > >>   structure of the `osdmap` section has been cleaned up. > >> > >> * A health warning is now generated if the average osd heartbeat ping > >>   time exceeds a configurable threshold for any of the intervals > >>   computed.  The OSD computes 1 minute, 5 minute and 15 minute > >>   intervals with average, minimum and maximum values.  New > >>   configuration option `mon_warn_on_slow_ping_ratio` specifies a > >>   percentage of `osd_heartbeat_grace` to determine the threshold.  A > >>   value of zero disables the warning.  New configuration option > >>   `mon_warn_on_slow_ping_time` specified in milliseconds over-rides > >>   the computed value, causes a warning when OSD heartbeat pings take > >>   longer than the specified amount.  New admin command `ceph daemon > >>   mgr.# dump_osd_network [threshold]` command will list all > >>   connections with a ping time longer than the specified threshold or > >>   value determined by the config options, for the average for any of > >>   the 3 intervals.  New admin command `ceph daemon osd.# > >>   dump_osd_network [threshold]` will do the same but only including > >>   heartbeats initiated by the specified OSD. > >> > >> * Inline data support for CephFS has been deprecated. When > setting the > >> flag, > >>   users will see a warning to that effect, and enabling it now > requires the > >>   `--yes-i-really-really-mean-it` flag. If the MDS is started on a > >>   filesystem that has it enabled, a health warning is generated. > Support > >> for > >>   this feature will be removed in a future release. > >> > >> * `ceph {set,unset} full` is not supported anymore. We have been > using > >>   `full` and `nearfull` flags in OSD map for tracking the > fullness status > >>   of a cluster back since the Hammer release, if the OSD map is > marked > >> `full` > >>   all write operations will be blocked until this flag is > removed. In the > >>   Infernalis release and Linux kernel 4.7 client, we introduced the > >> per-pool > >>   full/nearfull flags to track the status for a finer-grained > control, so > >> the > >>   clients will hold the write operations if either the > cluster-wide `full` > >>   flag or the per-pool `full` flag is set. This was a compromise, > as we > >>   needed to support the cluster with and without per-pool `full` > flags > >>   support. But this practically defeated the purpose of > introducing the > >>   per-pool flags. So, in the Mimic release, the new flags finally > took the > >>   place of their cluster-wide counterparts, as the monitor > started removing > >>   these two flags from OSD map. So the clients of Infernalis and > up can > >> benefit > >>   from this change, as they won't be blocked by the full pools > which they > >> are > >>   not writing to. In this release, `ceph {set,unset} full` is now > >> considered > >>   as an invalid command. And the clients will continue honoring > both the > >>   cluster-wide and per-pool flags to be backward comaptible with > >> pre-infernalis > >>   clusters. > >> > >> * The telemetry module now reports more information. > >> > >>   First, there is a new 'device' channel, enabled by default, that > >>   will report anonymized hard disk and SSD health metrics to > >>   telemetry.ceph.com <http://telemetry.ceph.com> in order to > build and improve device failure > >>   prediction algorithms.  If you are not comfortable sharing device > >>   metrics, you can disable that channel first before re-opting-in:: > >> > >>     ceph config set mgr mgr/telemetry/channel_device false > >> > >>   Second, we now report more information about CephFS file systems, > >>   including: > >> > >>   - how many MDS daemons (in total and per file system) > >>   - which features are (or have been) enabled > >>   - how many data pools > >>   - approximate file system age (year + month of creation) > >>   - how many files, bytes, and snapshots > >>   - how much metadata is being cached > >> > >>   We have also added: > >> > >>   - which Ceph release the monitors are running > >>   - whether msgr v1 or v2 addresses are used for the monitors > >>   - whether IPv4 or IPv6 addresses are used for the monitors > >>   - whether RADOS cache tiering is enabled (and which mode) > >>   - whether pools are replicated or erasure coded, and > >>     which erasure code profile plugin and parameters are in use > >>   - how many hosts are in the cluster, and how many hosts have > each type > >> of daemon > >>   - whether a separate OSD cluster network is being used > >>   - how many RBD pools and images are in the cluster, and how > many pools > >> have RBD mirroring enabled > >>   - how many RGW daemons, zones, and zonegroups are present; > which RGW > >> frontends are in use > >>   - aggregate stats about the CRUSH map, like which algorithms > are used, > >> how > >>     big buckets are, how many rules are defined, and what > tunables are in > >>     use > >> > >>   If you had telemetry enabled, you will need to re-opt-in with:: > >> > >>     ceph telemetry on > >> > >>   You can view exactly what information will be reported first with:: > >> > >>     $ ceph telemetry show        # see everything > >>     $ ceph telemetry show basic  # basic cluster info (including > all of > >> the new info) > >> > >> * Following invalid settings now are not tolerated anymore > >>   for the command `ceph osd erasure-code-profile set xxx`. > >>   * invalid `m` for "reed_sol_r6_op" erasure technique > >>   * invalid `m` and invalid `w` for "liber8tion" erasure technique > >> > >> * New OSD daemon command dump_recovery_reservations which reveals the > >>   recovery locks held (in_progress) and waiting in priority queues. > >> > >> * New OSD daemon command dump_scrub_reservations which reveals the > >>   scrub reservations that are held for local (primary) and remote > >> (replica) PGs. > >> > >> * Previously, `ceph tell mgr ...` could be used to call commands > >>   implemented by mgr modules.  This is no longer supported.  Since > >>   luminous, using `tell` has not been necessary: those same commands > >>   are also accessible without the `tell mgr` portion (e.g., `ceph > >>   tell mgr influx foo` is the same as `ceph influx foo`.  `ceph > >>   tell mgr ...` will now call admin commands--the same set of > >>   commands accessible via `ceph daemon ...` when you are logged into > >>   the appropriate host. > >> > >> * The `ceph tell` and `ceph daemon` commands have been unified, > >>   such that all such commands are accessible via either interface. > >>   Note that ceph-mgr tell commands are accessible via either `ceph > >>   tell mgr ...` or `ceph tell mgr.<id> ...`, and it is only > >>   possible to send tell commands to the active daemon (the > standbys do > >>   not accept incoming connections over the network). > >> > >> * Ceph will now issue a health warning if a RADOS pool as a `pg_num` > >>   value that is not a power of two.  This can be fixed by adjusting > >>   the pool to a nearby power of two:: > >> > >>     ceph osd pool set <pool-name> pg_num <new-pg-num> > >> > >>   Alternatively, the warning can be silenced with:: > >> > >>     ceph config set global > mon_warn_on_pool_pg_num_not_power_of_two false > >> > >> * The format of MDSs in `ceph fs dump` has changed. > >> > >> * The `mds_cache_size` config option is completely removed. Since > luminous, > >>   the `mds_cache_memory_limit` config option has been preferred to > >> configure > >>   the MDS's cache limits. > >> > >> * The `pg_autoscale_mode` is now set to `on` by default for newly > >>   created pools, which means that Ceph will automatically manage the > >>   number of PGs.  To change this behavior, or to learn more about PG > >>   autoscaling, see :ref:`pg-autoscaler`.  Note that existing pools in > >>   upgraded clusters will still be set to `warn` by default. > >> > >> * The `upmap_max_iterations` config option of mgr/balancer has been > >>   renamed to `upmap_max_optimizations` to better match its behaviour. > >> > >> * `mClockClientQueue` and `mClockClassQueue` OpQueue > >>   implementations have been removed in favor of of a single > >>   `mClockScheduler` implementation of a simpler OSD interface. > >>   Accordingly, the `osd_op_queue_mclock*` family of config options > >>   has been removed in favor of the `osd_mclock_scheduler*` family > >>   of options. > >> > >> * The config subsystem now searches dot ('.') delimited prefixes for > >>   options.  That means for an entity like `client.foo.bar`, its > >>   overall configuration will be a combination of the global options, > >>   `client`, `client.foo`, and `client.foo.bar`.  Previously, > >>   only global, `client`, and `client.foo.bar` options would apply. > >>   This change may affect the configuration for clients that include a > >>   `.` in their name. > >> > >> Getting Ceph > >> ------------ > >> * Git at git://github.com/ceph/ceph.git > <http://github.com/ceph/ceph.git> > >> * Tarball at http://download.ceph.com/tarballs/ceph-15.2.0.tar.gz > >> * For packages, see > http://docs.ceph.com/docs/master/install/get-packages/ > >> * Release git sha1: dc6a0b5c3cbf6a5e1d6d4f20b5ad466d76b96247 > >> > >> -- > >> Abhishek Lekshmanan > >> SUSE Software Solutions Germany GmbH > >> GF: Felix Imendörffer > >> _______________________________________________ > >> ceph-users mailing list -- ceph-users(a)ceph.io > <mailto:ceph-users@ceph.io> > >> To unsubscribe send an email to ceph-users-leave(a)ceph.io > <mailto:ceph-users-leave@ceph.io> > >> > > -- > Abhishek Lekshmanan > SUSE Software Solutions Germany GmbH > GF: Felix Imendörffer, Mary Higgins, Sri Rasiah, HRB 21284 (AG Nürnberg) >