I think those only work for librbd clients, not for Ceph-CSI or other KRBD clients.
> On Apr 2, 2023, at 3:47 PM, Danny Webb <Danny.Webb(a)thehutgroup.com> wrote:
>
> for RBD workloads you can set QOS values on a per image basis (and maybe on an
entire pool basis):
>
>
https://docs.ceph.com/en/latest/rbd/rbd-config-ref/#qos-settings
>
> i'm not sure if you can do so for other workloads.
> ________________________________
> From: farhad kh <farhad.khedriyan(a)gmail.com>
> Sent: 02 April 2023 15:07
> To: ceph-users(a)ceph.io <ceph-users(a)ceph.io>
> Subject: [ceph-users] Set the Quality of Service configuration.
>
> CAUTION: This email originates from outside THG
>
> how to i can set IO quota or limit for R/W for erasure coding pool in
> ceph ?
> _______________________________________________
> ceph-users mailing list -- ceph-users(a)ceph.io
> To unsubscribe send an email to ceph-users-leave(a)ceph.io
>
> _______________________________________________
> ceph-users mailing list -- ceph-users(a)ceph.io
> To unsubscribe send an email to ceph-users-leave(a)ceph.io