Your manager seems crash looping, it only started since 39s. Looking at mgr logs may help you identify why your cluster is not recovering. You may hit some bug in mgr.

You could stop the MGRs and wait for the recovery to finish, MGRs are not a critical component. You won’t have a dashboard or metrics during/of that time but it would prevent the high RAM usage. Zitat von "Ing. Luis Felipe Domínguez Vega" <luis.dominguez(a)desoft.cu>cu>:

The recovery process (ceph -s) is independent of the MGR service but only depends on the MON service. It seems you only have the one MON, if the MGR is overloading it (not clear why) it could help to leave MGR off and see if the MON service then has enough RAM to proceed with the recovery. Do you have any chance to add two more MONs? A single MON is of course a single point of failure. Zitat von "Ing. Luis Felipe Domínguez Vega" <luis.dominguez(a)desoft.cu>cu>:

Hi, just to clarify so I don't miss anything: you have two DCs and one of them is down. And two of the MONs were in that failed DC? Now you removed all OSDs and two MONs from the failed DC hoping that your cluster will recover? If you have reasonable crush rules in place (e.g. to recover from a failed DC) your cluster will never recover in the current state unless you bring OSDs back up on the second DC. That's why you don't see progress in the recovery process, the PGs are waiting for their peers in the other DC so they can follow the crush rules. Regards, Eugen Zitat von "Ing. Luis Felipe Domínguez Vega" <luis.dominguez(a)desoft.cu>cu>:

It depends on your actual crush tree and rules. Can you share (maybe you already did) ceph osd tree ceph osd df ceph osd pool ls detail and a dump of your crush rules? As I already said, if you have rules in place that distribute data across 2 DCs and one of them is down the PGs will never recover even if you delete the OSDs from the failed DC. Zitat von "Ing. Luis Felipe Domínguez Vega" <luis.dominguez(a)desoft.cu>cu>: > > El 2020-10-27 04:06, Eugen Block escribió: >> Hi, >> >> just to clarify so I don't miss anything: you have two DCs and one of >> them is down. And two of the MONs were in that failed DC? Now you >> removed all OSDs and two MONs from the failed DC hoping that your >> cluster will recover? If you have reasonable crush rules in place >> (e.g. to recover from a failed DC) your cluster will never recover in >> the current state unless you bring OSDs back up on the second DC. >> That's why you don't see progress in the recovery process, the PGs are >> waiting for their peers in the other DC so they can follow the crush >> rules. >> >> Regards, >> Eugen >> >> >> Zitat von "Ing. Luis Felipe Domínguez Vega" <luis.dominguez(a)desoft.cu>cu>: >> >>> I was 3 mons, but i have 2 physical datacenters, one of them >>> breaks with not short term fix, so i remove all osds and ceph mon >>> (2 of them) and now i have only the osds of 1 datacenter with the >>> monitor. I was stopped the ceph manager, but i was see that when >>> i restart a ceph manager then ceph -s show recovering info for a >>> short term of 20 min more or less, then dissapear all info. >>> >>> The thing is that sems the cluster is not self recovering and the >>> ceph monitor is "eating" all of the HDD. >>> >>> El 2020-10-26 15:57, Eugen Block escribió: >>>> The recovery process (ceph -s) is independent of the MGR service but >>>> only depends on the MON service. It seems you only have the one MON, >>>> if the MGR is overloading it (not clear why) it could help to leave >>>> MGR off and see if the MON service then has enough RAM to proceed with >>>> the recovery. Do you have any chance to add two more MONs? A single >>>> MON is of course a single point of failure. >>>> >>>> >>>> Zitat von "Ing. Luis Felipe Domínguez Vega" <luis.dominguez(a)desoft.cu>cu>: >>>> >>>>> El 2020-10-26 15:16, Eugen Block escribió: >>>>>> You could stop the MGRs and wait for the recovery to finish, MGRs are >>>>>> not a critical component. You won’t have a dashboard or metrics >>>>>> during/of that time but it would prevent the high RAM usage. >>>>>> >>>>>> Zitat von "Ing. Luis Felipe Domínguez Vega" <luis.dominguez(a)desoft.cu>cu>: >>>>>> >>>>>>> El 2020-10-26 12:23, 胡 玮文 escribió: >>>>>>>>> 在 2020年10月26日，23:29，Ing. Luis Felipe Domínguez Vega >>>>>>>>> <luis.dominguez(a)desoft.cu> 写道： >>>>>>>>> >>>>>>>>> mgr: fond-beagle(active, since 39s) >>>>>>>> >>>>>>>> Your manager seems crash looping, it only started since 39s. Looking >>>>>>>> at mgr logs may help you identify why your cluster is not recovering. >>>>>>>> You may hit some bug in mgr. >>>>>>> Noup, I'm restarting the ceph manager because they eat all >>>>>>> server RAM and then i have an script that when i have 1GB of >>>>>>> Free Ram (the server has 94 Gb of RAM) then restart the >>>>>>> manager, i dont known why and the logs of manager are: >>>>>>> >>>>>>> ----------------------------------- >>>>>>> root@fond-beagle:/var/lib/ceph/mon/ceph-fond-beagle/store.db# >>>>>>> tail -f /var/log/ceph/ceph-mgr.fond-beagle.log >>>>>>> 2020-10-26T12:54:12.497-0400 7f2a8112b700 0 >>>>>>> log_channel(cluster) log [DBG] : pgmap v584: 2305 pgs: 4 >>>>>>> active+undersized+degraded+remapped, 4 >>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>> active+clean, 5 active+undersized+degraded, 34 incomplete, 154 >>>>>>> unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB avail; >>>>>>> 347248/2606900 objects degraded (13.320%); 107570/2606900 >>>>>>> objects misplaced (4.126%); 19/404328 objects unfound (0.005%) >>>>>>> 2020-10-26T12:54:12.497-0400 7f2a8112b700 0 >>>>>>> log_channel(cluster) do_log log to syslog >>>>>>> 2020-10-26T12:54:14.501-0400 7f2a8112b700 0 >>>>>>> log_channel(cluster) log [DBG] : pgmap v585: 2305 pgs: 4 >>>>>>> active+undersized+degraded+remapped, 4 >>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>> active+clean, 5 active+undersized+degraded, 34 incomplete, 154 >>>>>>> unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB avail; >>>>>>> 347248/2606900 objects degraded (13.320%); 107570/2606900 >>>>>>> objects misplaced (4.126%); 19/404328 objects unfound (0.005%) >>>>>>> 2020-10-26T12:54:14.501-0400 7f2a8112b700 0 >>>>>>> log_channel(cluster) do_log log to syslog >>>>>>> 2020-10-26T12:54:16.517-0400 7f2a8112b700 0 >>>>>>> log_channel(cluster) log [DBG] : pgmap v586: 2305 pgs: 4 >>>>>>> active+undersized+degraded+remapped, 4 >>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>> active+clean, 5 active+undersized+degraded, 34 incomplete, 154 >>>>>>> unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB avail; >>>>>>> 347248/2606900 objects degraded (13.320%); 107570/2606900 >>>>>>> objects misplaced (4.126%); 19/404328 objects unfound (0.005%) >>>>>>> 2020-10-26T12:54:16.517-0400 7f2a8112b700 0 >>>>>>> log_channel(cluster) do_log log to syslog >>>>>>> 2020-10-26T12:54:18.521-0400 7f2a8112b700 0 >>>>>>> log_channel(cluster) log [DBG] : pgmap v587: 2305 pgs: 4 >>>>>>> active+undersized+degraded+remapped, 4 >>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>> active+clean, 5 active+undersized+degraded, 34 incomplete, 154 >>>>>>> unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB avail; >>>>>>> 347248/2606900 objects degraded (13.320%); 107570/2606900 >>>>>>> objects misplaced (4.126%); 19/404328 objects unfound (0.005%) >>>>>>> 2020-10-26T12:54:18.521-0400 7f2a8112b700 0 >>>>>>> log_channel(cluster) do_log log to syslog >>>>>>> 2020-10-26T12:54:20.537-0400 7f2a8112b700 0 >>>>>>> log_channel(cluster) log [DBG] : pgmap v588: 2305 pgs: 4 >>>>>>> active+undersized+degraded+remapped, 4 >>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>> active+clean, 5 active+undersized+degraded, 34 incomplete, 154 >>>>>>> unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB avail; >>>>>>> 347248/2606900 objects degraded (13.320%); 107570/2606900 >>>>>>> objects misplaced (4.126%); 19/404328 objects unfound (0.005%) >>>>>>> 2020-10-26T12:54:20.537-0400 7f2a8112b700 0 >>>>>>> log_channel(cluster) do_log log to syslog >>>>>>> 2020-10-26T12:54:22.541-0400 7f2a8112b700 0 >>>>>>> log_channel(cluster) log [DBG] : pgmap v589: 2305 pgs: 4 >>>>>>> active+undersized+degraded+remapped, 4 >>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>> active+clean, 5 active+undersized+degraded, 34 incomplete, 154 >>>>>>> unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB avail; >>>>>>> 347248/2606900 objects degraded (13.320%); 107570/2606900 >>>>>>> objects misplaced (4.126%); 19/404328 objects unfound (0.005%) >>>>>>> 2020-10-26T12:54:22.541-0400 7f2a8112b700 0 >>>>>>> log_channel(cluster) do_log log to syslog >>>>>>> --------------- >>>>>>> _______________________________________________ >>>>>>> ceph-users mailing list -- ceph-users(a)ceph.io >>>>>>> To unsubscribe send an email to ceph-users-leave(a)ceph.io >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> ceph-users mailing list -- ceph-users(a)ceph.io >>>>>> To unsubscribe send an email to ceph-users-leave(a)ceph.io >>>>> >>>>> Ok i will do that... but the thing is that the cluster not show >>>>> recovering, not show that are doing nothing, like to show the >>>>> recovering info on ceph -s command, and then i dont know if is >>>>> recovering or doing what?

Your pool 'data_storage' has a size of 7 (or 7 chunks since it's erasure-coded) and the rule requires each chunk on a different host but you currently have only 5 hosts available, that's why the recovery is not progressing. It's waiting for two more hosts. Unfortunately, you can't change the EC profile or the rule of that pool. I'm not sure if it would work in the current cluster state, but if you can't add two more hosts (which would be your best option for recovery) it might be possible to create a new replicated pool (you seem to have enough free space) and copy the contents from that EC pool. But as I said, I'm not sure if that would work in a degraded state, I've never tried that. So your best bet is to get two more hosts somehow. Zitat von "Ing. Luis Felipe Domínguez Vega" <luis.dominguez(a)desoft.cu>cu>:

If you have that many spare hosts I would recommend to deploy two more MONs on them, and probably also additional MGRs so they can failover. What is the EC profile for the data_storage pool? Can you also share ceph pg dump pgs | grep -v "active+clean" to see which PGs are affected. The remaining issue with unfound objects and unkown PGs could be because you removed OSDs. That could mean data loss, but maybe there's a chance to recover anyway. Zitat von "Ing. Luis Felipe Domínguez Vega" <luis.dominguez(a)desoft.cu>cu>:

If you change to one site only, there is no point in getting rid of the EC pool. Your main problem will be restoring the lost data. Do you have backup of everything? Do you still have the old OSDs? You never answered these questions. To give you an idea why this is important, with ceph, loosing 1% of data on an rbd pool does *not* mean you loose 1% of the disks. It means that, on average, every disk looses 1% of its blocks. In other words, getting everything up again will be a lot of work either way. The best path to follow is what Eugen suggested: add mons to have at least 3 and dig out the old disks to be able to export and import PGs. Look at Eugen's last 2 e-mails, its a starting point. You might be able to recover more by reducing temporarily min_size to 1 on the replicated pools and to 4 on the EC pool. If possible, make sure there is no client access during that time. The missing rest needs to be scraped off the OSDs you deleted from the cluster. If you have backup of everything, starting from scratch and populating the ceph cluster from backup might be the fastest option. Best regards, ================= Frank Schilder AIT Risø Campus Bygning 109, rum S14 ________________________________________ From: Eugen Block <eblock(a)nde.ag> Sent: 28 October 2020 07:23:09 To: Ing. Luis Felipe Domínguez Vega Cc: Ceph Users Subject: [ceph-users] Re: Huge HDD ceph monitor usage [EXT] If you have that many spare hosts I would recommend to deploy two more MONs on them, and probably also additional MGRs so they can failover. What is the EC profile for the data_storage pool? Can you also share ceph pg dump pgs | grep -v "active+clean" to see which PGs are affected. The remaining issue with unfound objects and unkown PGs could be because you removed OSDs. That could mean data loss, but maybe there's a chance to recover anyway. Zitat von "Ing. Luis Felipe Domínguez Vega" <luis.dominguez(a)desoft.cu>cu>: _______________________________________________ ceph-users mailing list -- ceph-users(a)ceph.io To unsubscribe send an email to ceph-users-leave(a)ceph.io

Uff.. now two of the OSD are crashing with... https://pastebin.ubuntu.com/p/qd6Tc2rpfm/ El 2020-10-29 13:11, Frank Schilder escribió: >> ... i will use now only one site, but need first stabilice the >> cluster to remove the EC erasure coding and use replicate ... > > If you change to one site only, there is no point in getting rid of > the EC pool. Your main problem will be restoring the lost data. Do you > have backup of everything? Do you still have the old OSDs? You never > answered these questions. > > To give you an idea why this is important, with ceph, loosing 1% of > data on an rbd pool does *not* mean you loose 1% of the disks. It > means that, on average, every disk looses 1% of its blocks. In other > words, getting everything up again will be a lot of work either way. > > The best path to follow is what Eugen suggested: add mons to have at > least 3 and dig out the old disks to be able to export and import PGs. > Look at Eugen's last 2 e-mails, its a starting point. You might be > able to recover more by reducing temporarily min_size to 1 on the > replicated pools and to 4 on the EC pool. If possible, make sure there > is no client access during that time. The missing rest needs to be > scraped off the OSDs you deleted from the cluster. > > If you have backup of everything, starting from scratch and populating > the ceph cluster from backup might be the fastest option. > > Best regards, > ================= > Frank Schilder > AIT Risø Campus > Bygning 109, rum S14 > > ________________________________________ > From: Eugen Block <eblock(a)nde.ag> > Sent: 28 October 2020 07:23:09 > To: Ing. Luis Felipe Domínguez Vega > Cc: Ceph Users > Subject: [ceph-users] Re: Huge HDD ceph monitor usage [EXT] > > If you have that many spare hosts I would recommend to deploy two more > MONs on them, and probably also additional MGRs so they can failover. > > What is the EC profile for the data_storage pool? > > Can you also share > > ceph pg dump pgs | grep -v "active+clean" > > to see which PGs are affected. > The remaining issue with unfound objects and unkown PGs could be > because you removed OSDs. That could mean data loss, but maybe there's > a chance to recover anyway. > > > Zitat von "Ing. Luis Felipe Domínguez Vega" <luis.dominguez(a)desoft.cu>cu>: > >> Well recovering not working yet... i was started 6 servers more and >> the cluster not yet recovered. >> Ceph status not show any recover progress >> >> ceph -s : https://pastebin.ubuntu.com/p/zRQPbvGzbw/ >> ceph osd tree : https://pastebin.ubuntu.com/p/sTDs8vd7Sk/ >> ceph osd df : https://pastebin.ubuntu.com/p/ysbh8r2VVz/ >> ceph osd pool ls detail : https://pastebin.ubuntu.com/p/GRdPjxhv3D/ >> crush rules : (ceph osd crush rule dump) >> https://pastebin.ubuntu.com/p/cjyjmbQ4Wq/ >> >> El 2020-10-27 09:59, Eugen Block escribió: >>> Your pool 'data_storage' has a size of 7 (or 7 chunks since it's >>> erasure-coded) and the rule requires each chunk on a different host >>> but you currently have only 5 hosts available, that's why the >>> recovery >>> is not progressing. It's waiting for two more hosts. Unfortunately, >>> you can't change the EC profile or the rule of that pool. I'm not >>> sure >>> if it would work in the current cluster state, but if you can't add >>> two more hosts (which would be your best option for recovery) it >>> might >>> be possible to create a new replicated pool (you seem to have enough >>> free space) and copy the contents from that EC pool. But as I said, >>> I'm not sure if that would work in a degraded state, I've never tried >>> that. >>> >>> So your best bet is to get two more hosts somehow. >>> >>> >>>> pool 4 'data_storage' erasure profile desoft size 7 min_size 5 >>>> crush_rule 1 object_hash rjenkins pg_num 32 pgp_num 32 >>>> autoscale_mode off last_change 154384 lfor 0/121016/121014 flags >>>> hashpspool,ec_overwrites,selfmanaged_snaps stripe_width 16384 >>>> application rbd >>> >>> >>> Zitat von "Ing. Luis Felipe Domínguez Vega" >>> <luis.dominguez(a)desoft.cu>cu>: >>> >>>> Needed data: >>>> >>>> ceph -s : https://pastebin.ubuntu.com/p/S9gKjyZtdK/ >>>> ceph osd tree : https://pastebin.ubuntu.com/p/SCZHkk6Mk4/ >>>> ceph osd df : (later, because i'm waiting since 10 >>>> minutes and not output yet) >>>> ceph osd pool ls detail : https://pastebin.ubuntu.com/p/GRdPjxhv3D/ >>>> crush rules : (ceph osd crush rule dump) >>>> https://pastebin.ubuntu.com/p/cjyjmbQ4Wq/ >>>> >>>> El 2020-10-27 07:14, Eugen Block escribió: >>>>>> I understand, but i delete the OSDs from CRUSH map, so ceph >>>>>> don't wait for these OSDs, i'm right? >>>>> >>>>> It depends on your actual crush tree and rules. Can you share >>>>> (maybe >>>>> you already did) >>>>> >>>>> ceph osd tree >>>>> ceph osd df >>>>> ceph osd pool ls detail >>>>> >>>>> and a dump of your crush rules? >>>>> >>>>> As I already said, if you have rules in place that distribute data >>>>> across 2 DCs and one of them is down the PGs will never recover >>>>> even >>>>> if you delete the OSDs from the failed DC. >>>>> >>>>> >>>>> >>>>> Zitat von "Ing. Luis Felipe Domínguez Vega" >>>>> <luis.dominguez(a)desoft.cu>cu>: >>>>> >>>>>> I understand, but i delete the OSDs from CRUSH map, so ceph >>>>>> don't wait for these OSDs, i'm right? >>>>>> >>>>>> El 2020-10-27 04:06, Eugen Block escribió: >>>>>>> Hi, >>>>>>> >>>>>>> just to clarify so I don't miss anything: you have two DCs and >>>>>>> one of >>>>>>> them is down. And two of the MONs were in that failed DC? Now you >>>>>>> removed all OSDs and two MONs from the failed DC hoping that your >>>>>>> cluster will recover? If you have reasonable crush rules in place >>>>>>> (e.g. to recover from a failed DC) your cluster will never >>>>>>> recover in >>>>>>> the current state unless you bring OSDs back up on the second DC. >>>>>>> That's why you don't see progress in the recovery process, the >>>>>>> PGs are >>>>>>> waiting for their peers in the other DC so they can follow the >>>>>>> crush >>>>>>> rules. >>>>>>> >>>>>>> Regards, >>>>>>> Eugen >>>>>>> >>>>>>> >>>>>>> Zitat von "Ing. Luis Felipe Domínguez Vega" >>>>>>> <luis.dominguez(a)desoft.cu>cu>: >>>>>>> >>>>>>>> I was 3 mons, but i have 2 physical datacenters, one of them >>>>>>>> breaks with not short term fix, so i remove all osds and ceph >>>>>>>> mon (2 of them) and now i have only the osds of 1 >>>>>>>> datacenter with the monitor. I was stopped the ceph >>>>>>>> manager, but i was see that when i restart a ceph manager >>>>>>>> then ceph -s show recovering info for a short term of 20 >>>>>>>> min more or less, then dissapear all info. >>>>>>>> >>>>>>>> The thing is that sems the cluster is not self recovering and >>>>>>>> the ceph monitor is "eating" all of the HDD. >>>>>>>> >>>>>>>> El 2020-10-26 15:57, Eugen Block escribió: >>>>>>>>> The recovery process (ceph -s) is independent of the MGR >>>>>>>>> service but >>>>>>>>> only depends on the MON service. It seems you only have the one >>>>>>>>> MON, >>>>>>>>> if the MGR is overloading it (not clear why) it could help to >>>>>>>>> leave >>>>>>>>> MGR off and see if the MON service then has enough RAM to >>>>>>>>> proceed with >>>>>>>>> the recovery. Do you have any chance to add two more MONs? A >>>>>>>>> single >>>>>>>>> MON is of course a single point of failure. >>>>>>>>> >>>>>>>>> >>>>>>>>> Zitat von "Ing. Luis Felipe Domínguez Vega" >>>>>>>>> <luis.dominguez(a)desoft.cu>cu>: >>>>>>>>> >>>>>>>>>> El 2020-10-26 15:16, Eugen Block escribió: >>>>>>>>>>> You could stop the MGRs and wait for the recovery to >>>>>>>>>>> finish, MGRs are >>>>>>>>>>> not a critical component. You won’t have a dashboard or >>>>>>>>>>> metrics >>>>>>>>>>> during/of that time but it would prevent the high RAM usage. >>>>>>>>>>> >>>>>>>>>>> Zitat von "Ing. Luis Felipe Domínguez Vega" >>>>>>>>>>> <luis.dominguez(a)desoft.cu>cu>: >>>>>>>>>>> >>>>>>>>>>>> El 2020-10-26 12:23, 胡 玮文 escribió: >>>>>>>>>>>>>> 在 2020年10月26日，23:29，Ing. Luis Felipe Domínguez Vega >>>>>>>>>>>>>> <luis.dominguez(a)desoft.cu> 写道： >>>>>>>>>>>>>> >>>>>>>>>>>>>> mgr: fond-beagle(active, since 39s) >>>>>>>>>>>>> >>>>>>>>>>>>> Your manager seems crash looping, it only started since >>>>>>>>>>>>> 39s. Looking >>>>>>>>>>>>> at mgr logs may help you identify why your cluster is not >>>>>>>>>>>>> recovering. >>>>>>>>>>>>> You may hit some bug in mgr. >>>>>>>>>>>> Noup, I'm restarting the ceph manager because they eat all >>>>>>>>>>>> server RAM and then i have an script that when i have >>>>>>>>>>>> 1GB of Free Ram (the server has 94 Gb of RAM) then >>>>>>>>>>>> restart the manager, i dont known why and the logs of >>>>>>>>>>>> manager are: >>>>>>>>>>>> >>>>>>>>>>>> ----------------------------------- >>>>>>>>>>>> root@fond-beagle:/var/lib/ceph/mon/ceph-fond-beagle/store.db# >>>>>>>>>>>> tail -f /var/log/ceph/ceph-mgr.fond-beagle.log >>>>>>>>>>>> 2020-10-26T12:54:12.497-0400 7f2a8112b700 0 >>>>>>>>>>>> log_channel(cluster) log [DBG] : pgmap v584: 2305 pgs: 4 >>>>>>>>>>>> active+undersized+degraded+remapped, 4 >>>>>>>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>>>>>>> active+clean, 5 active+undersized+degraded, 34 >>>>>>>>>>>> incomplete, 154 unknown; 1.7 TiB data, 2.9 TiB used, >>>>>>>>>>>> 21 TiB / 24 TiB avail; 347248/2606900 objects >>>>>>>>>>>> degraded (13.320%); 107570/2606900 objects misplaced >>>>>>>>>>>> (4.126%); 19/404328 objects unfound (0.005%) >>>>>>>>>>>> 2020-10-26T12:54:12.497-0400 7f2a8112b700 0 >>>>>>>>>>>> log_channel(cluster) do_log log to syslog >>>>>>>>>>>> 2020-10-26T12:54:14.501-0400 7f2a8112b700 0 >>>>>>>>>>>> log_channel(cluster) log [DBG] : pgmap v585: 2305 pgs: 4 >>>>>>>>>>>> active+undersized+degraded+remapped, 4 >>>>>>>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>>>>>>> active+clean, 5 active+undersized+degraded, 34 >>>>>>>>>>>> incomplete, 154 unknown; 1.7 TiB data, 2.9 TiB used, >>>>>>>>>>>> 21 TiB / 24 TiB avail; 347248/2606900 objects >>>>>>>>>>>> degraded (13.320%); 107570/2606900 objects misplaced >>>>>>>>>>>> (4.126%); 19/404328 objects unfound (0.005%) >>>>>>>>>>>> 2020-10-26T12:54:14.501-0400 7f2a8112b700 0 >>>>>>>>>>>> log_channel(cluster) do_log log to syslog >>>>>>>>>>>> 2020-10-26T12:54:16.517-0400 7f2a8112b700 0 >>>>>>>>>>>> log_channel(cluster) log [DBG] : pgmap v586: 2305 pgs: 4 >>>>>>>>>>>> active+undersized+degraded+remapped, 4 >>>>>>>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>>>>>>> active+clean, 5 active+undersized+degraded, 34 >>>>>>>>>>>> incomplete, 154 unknown; 1.7 TiB data, 2.9 TiB used, >>>>>>>>>>>> 21 TiB / 24 TiB avail; 347248/2606900 objects >>>>>>>>>>>> degraded (13.320%); 107570/2606900 objects misplaced >>>>>>>>>>>> (4.126%); 19/404328 objects unfound (0.005%) >>>>>>>>>>>> 2020-10-26T12:54:16.517-0400 7f2a8112b700 0 >>>>>>>>>>>> log_channel(cluster) do_log log to syslog >>>>>>>>>>>> 2020-10-26T12:54:18.521-0400 7f2a8112b700 0 >>>>>>>>>>>> log_channel(cluster) log [DBG] : pgmap v587: 2305 pgs: 4 >>>>>>>>>>>> active+undersized+degraded+remapped, 4 >>>>>>>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>>>>>>> active+clean, 5 active+undersized+degraded, 34 >>>>>>>>>>>> incomplete, 154 unknown; 1.7 TiB data, 2.9 TiB used, >>>>>>>>>>>> 21 TiB / 24 TiB avail; 347248/2606900 objects >>>>>>>>>>>> degraded (13.320%); 107570/2606900 objects misplaced >>>>>>>>>>>> (4.126%); 19/404328 objects unfound (0.005%) >>>>>>>>>>>> 2020-10-26T12:54:18.521-0400 7f2a8112b700 0 >>>>>>>>>>>> log_channel(cluster) do_log log to syslog >>>>>>>>>>>> 2020-10-26T12:54:20.537-0400 7f2a8112b700 0 >>>>>>>>>>>> log_channel(cluster) log [DBG] : pgmap v588: 2305 pgs: 4 >>>>>>>>>>>> active+undersized+degraded+remapped, 4 >>>>>>>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>>>>>>> active+clean, 5 active+undersized+degraded, 34 >>>>>>>>>>>> incomplete, 154 unknown; 1.7 TiB data, 2.9 TiB used, >>>>>>>>>>>> 21 TiB / 24 TiB avail; 347248/2606900 objects >>>>>>>>>>>> degraded (13.320%); 107570/2606900 objects misplaced >>>>>>>>>>>> (4.126%); 19/404328 objects unfound (0.005%) >>>>>>>>>>>> 2020-10-26T12:54:20.537-0400 7f2a8112b700 0 >>>>>>>>>>>> log_channel(cluster) do_log log to syslog >>>>>>>>>>>> 2020-10-26T12:54:22.541-0400 7f2a8112b700 0 >>>>>>>>>>>> log_channel(cluster) log [DBG] : pgmap v589: 2305 pgs: 4 >>>>>>>>>>>> active+undersized+degraded+remapped, 4 >>>>>>>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>>>>>>> active+clean, 5 active+undersized+degraded, 34 >>>>>>>>>>>> incomplete, 154 unknown; 1.7 TiB data, 2.9 TiB used, >>>>>>>>>>>> 21 TiB / 24 TiB avail; 347248/2606900 objects >>>>>>>>>>>> degraded (13.320%); 107570/2606900 objects misplaced >>>>>>>>>>>> (4.126%); 19/404328 objects unfound (0.005%) >>>>>>>>>>>> 2020-10-26T12:54:22.541-0400 7f2a8112b700 0 >>>>>>>>>>>> log_channel(cluster) do_log log to syslog >>>>>>>>>>>> --------------- >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> ceph-users mailing list -- ceph-users(a)ceph.io >>>>>>>>>>>> To unsubscribe send an email to ceph-users-leave(a)ceph.io >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> ceph-users mailing list -- ceph-users(a)ceph.io >>>>>>>>>>> To unsubscribe send an email to ceph-users-leave(a)ceph.io >>>>>>>>>> >>>>>>>>>> Ok i will do that... but the thing is that the cluster not >>>>>>>>>> show recovering, not show that are doing nothing, like to >>>>>>>>>> show the recovering info on ceph -s command, and then i >>>>>>>>>> dont know if is recovering or doing what? > > > _______________________________________________ > ceph-users mailing list -- ceph-users(a)ceph.io > To unsubscribe send an email to ceph-users-leave(a)ceph.io

Great response, thanks, i will use now only one site, but need first stabilice the cluster to remove the EC erasure coding and use replicate. Could you help me? So the thing is that i have 2 pool, cinder-ceph and data_storage. data_storage is only as data_path for cinder-ceph pool, but now i use only the cinder-ceph with replication 3. How can i move all data from data_storage to cinder-ceph and remove the EC. El 2020-10-28 06:55, Frank Schilder escribió: > Hi all, I need to go back to a small piece of information: > >> I was 3 mons, but i have 2 physical datacenters, one of them breaks >> with >> not short term fix, so i remove all osds and ceph mon (2 of them) and >> now i have only the osds of 1 datacenter with the monitor. > > When I look at the data about pools and crush map, I don't see > anything that is multi-site. Maybe the physical location was 2-site, > but the crush rules don't reflect that. Consequently, the ceph cluster > was configured single-site and will act accordingly when you loose 50% > of it. > > Quick interlude: when people recommend to add servers, they do not > necessarily mean *new* servers. They mean you have to go to ground > zero, dig out as much hardware as you can, drive it to the working > site and make it rejoin the cluster. > > A hypothesis. Assume we want to build a 2-site cluster (sites A and B) > that can sustain the total loss of any 1 site, capacity at each site > is equal (mirrored). > > Short answer: this is not exactly possible due to the fact that you > always need a qualified majority of monitors for quorum and you cannot > distribute both, N MONs and a qualified majority evenly and > simultaneously over 2 sites. We have already an additional constraint: > site A will have 2 and site B 1 monitor. The condition is, that in > case site A goes down the monitors from the site A can be rescued and > moved to site B to restore data access. Hence, a loss of site A will > imply temporary loss of service (Note that 2+2=4 MONs will not help, > because now 3 MONs are required for a qualified majority; again MONs > need to be rescued from the down site). If this constraint is > satisfied, then one can configure pools as follows: > > replicated: size 4, min_size 2, crush rule places 2 copies at each site > erasure coded: k+m with min_size=k+1, m even and m>=k+2, for example, > k=2, m=4, crush rule places 3 shards at each site > > With such a configuration, it is possible to sustain the loss of any > one site if the monitors can be recovered from site A. Note that such > EC pools will be very compute intense and have high latency (use > option fast_read to get at least reasonable read speeds). Essentially, > EC is not really suitable for multi-site redundancy, but the above EC > set up will require a bit less capacity than 4 copies. > > This setup can sustain the total loss of 1 site (minus MONs on site A) > and will rebuild all data once a large enough second site is brought > up again. > > When I look at the information you posted, I see replication 3(2) and > EC 5+2 pools, all having crush root default. I do not see any of these > mandatory configurations, the sites are ignored in the crush rules. > Hence, if you can't get material from the down site back up, you look > at permanent data loss. > > You may be able to recover some more data in the replicated pools by > setting min_size=1 for some time. However, you will loose any writes > that are on the other 2 but not on the 1 disk now used for recovery > and it will certainly not recover PGs with all 3 copies on the down > site. Therefore, I would not attempt this, also because for the EC > pools, you will need to get hold of the hosts from the down site and > re-integrate these into the cluster any ways. If you can't do this, > the data is lost. > > In the long run, given your crush map and rules, you either stop > placing stuff at 2 sites, or you create a proper 2-site set-up and > copy data over. > > Best regards, > ================= > Frank Schilder > AIT Risø Campus > Bygning 109, rum S14 > > ________________________________________ > From: Ing. Luis Felipe Domínguez Vega <luis.dominguez(a)desoft.cu> > Sent: 28 October 2020 05:14:27 > To: Eugen Block > Cc: Ceph Users > Subject: [ceph-users] Re: Huge HDD ceph monitor usage [EXT] > > Well recovering not working yet... i was started 6 servers more and the > cluster not yet recovered. > Ceph status not show any recover progress > > ceph -s : https://pastebin.ubuntu.com/p/zRQPbvGzbw/ > ceph osd tree : https://pastebin.ubuntu.com/p/sTDs8vd7Sk/ > ceph osd df : https://pastebin.ubuntu.com/p/ysbh8r2VVz/ > ceph osd pool ls detail : https://pastebin.ubuntu.com/p/GRdPjxhv3D/ > crush rules : (ceph osd crush rule dump) > https://pastebin.ubuntu.com/p/cjyjmbQ4Wq/ > > El 2020-10-27 09:59, Eugen Block escribió: >> Your pool 'data_storage' has a size of 7 (or 7 chunks since it's >> erasure-coded) and the rule requires each chunk on a different host >> but you currently have only 5 hosts available, that's why the recovery >> is not progressing. It's waiting for two more hosts. Unfortunately, >> you can't change the EC profile or the rule of that pool. I'm not sure >> if it would work in the current cluster state, but if you can't add >> two more hosts (which would be your best option for recovery) it might >> be possible to create a new replicated pool (you seem to have enough >> free space) and copy the contents from that EC pool. But as I said, >> I'm not sure if that would work in a degraded state, I've never tried >> that. >> >> So your best bet is to get two more hosts somehow. >> >> >>> pool 4 'data_storage' erasure profile desoft size 7 min_size 5 >>> crush_rule 1 object_hash rjenkins pg_num 32 pgp_num 32 >>> autoscale_mode >>> off last_change 154384 lfor 0/121016/121014 flags >>> hashpspool,ec_overwrites,selfmanaged_snaps stripe_width 16384 >>> application rbd >> >> >> Zitat von "Ing. Luis Felipe Domínguez Vega" >> <luis.dominguez(a)desoft.cu>cu>: >> >>> Needed data: >>> >>> ceph -s : https://pastebin.ubuntu.com/p/S9gKjyZtdK/ >>> ceph osd tree : https://pastebin.ubuntu.com/p/SCZHkk6Mk4/ >>> ceph osd df : (later, because i'm waiting since 10 >>> minutes and not output yet) >>> ceph osd pool ls detail : https://pastebin.ubuntu.com/p/GRdPjxhv3D/ >>> crush rules : (ceph osd crush rule dump) >>> https://pastebin.ubuntu.com/p/cjyjmbQ4Wq/ >>> >>> El 2020-10-27 07:14, Eugen Block escribió: >>>>> I understand, but i delete the OSDs from CRUSH map, so ceph don't >>>>> wait for these OSDs, i'm right? >>>> >>>> It depends on your actual crush tree and rules. Can you share (maybe >>>> you already did) >>>> >>>> ceph osd tree >>>> ceph osd df >>>> ceph osd pool ls detail >>>> >>>> and a dump of your crush rules? >>>> >>>> As I already said, if you have rules in place that distribute data >>>> across 2 DCs and one of them is down the PGs will never recover even >>>> if you delete the OSDs from the failed DC. >>>> >>>> >>>> >>>> Zitat von "Ing. Luis Felipe Domínguez Vega" >>>> <luis.dominguez(a)desoft.cu>cu>: >>>> >>>>> I understand, but i delete the OSDs from CRUSH map, so ceph don't >>>>> wait for these OSDs, i'm right? >>>>> >>>>> El 2020-10-27 04:06, Eugen Block escribió: >>>>>> Hi, >>>>>> >>>>>> just to clarify so I don't miss anything: you have two DCs and one >>>>>> of >>>>>> them is down. And two of the MONs were in that failed DC? Now you >>>>>> removed all OSDs and two MONs from the failed DC hoping that your >>>>>> cluster will recover? If you have reasonable crush rules in place >>>>>> (e.g. to recover from a failed DC) your cluster will never recover >>>>>> in >>>>>> the current state unless you bring OSDs back up on the second DC. >>>>>> That's why you don't see progress in the recovery process, the PGs >>>>>> are >>>>>> waiting for their peers in the other DC so they can follow the >>>>>> crush >>>>>> rules. >>>>>> >>>>>> Regards, >>>>>> Eugen >>>>>> >>>>>> >>>>>> Zitat von "Ing. Luis Felipe Domínguez Vega" >>>>>> <luis.dominguez(a)desoft.cu>cu>: >>>>>> >>>>>>> I was 3 mons, but i have 2 physical datacenters, one of them >>>>>>> breaks with not short term fix, so i remove all osds and ceph >>>>>>> mon (2 of them) and now i have only the osds of 1 datacenter >>>>>>> with the monitor. I was stopped the ceph manager, but i was >>>>>>> see >>>>>>> that when i restart a ceph manager then ceph -s show >>>>>>> recovering >>>>>>> info for a short term of 20 min more or less, then dissapear >>>>>>> all info. >>>>>>> >>>>>>> The thing is that sems the cluster is not self recovering and >>>>>>> the >>>>>>> ceph monitor is "eating" all of the HDD. >>>>>>> >>>>>>> El 2020-10-26 15:57, Eugen Block escribió: >>>>>>>> The recovery process (ceph -s) is independent of the MGR service >>>>>>>> but >>>>>>>> only depends on the MON service. It seems you only have the one >>>>>>>> MON, >>>>>>>> if the MGR is overloading it (not clear why) it could help to >>>>>>>> leave >>>>>>>> MGR off and see if the MON service then has enough RAM to >>>>>>>> proceed >>>>>>>> with >>>>>>>> the recovery. Do you have any chance to add two more MONs? A >>>>>>>> single >>>>>>>> MON is of course a single point of failure. >>>>>>>> >>>>>>>> >>>>>>>> Zitat von "Ing. Luis Felipe Domínguez Vega" >>>>>>>> <luis.dominguez(a)desoft.cu>cu>: >>>>>>>> >>>>>>>>> El 2020-10-26 15:16, Eugen Block escribió: >>>>>>>>>> You could stop the MGRs and wait for the recovery to finish, >>>>>>>>>> MGRs are >>>>>>>>>> not a critical component. You won’t have a dashboard or >>>>>>>>>> metrics >>>>>>>>>> during/of that time but it would prevent the high RAM usage. >>>>>>>>>> >>>>>>>>>> Zitat von "Ing. Luis Felipe Domínguez Vega" >>>>>>>>>> <luis.dominguez(a)desoft.cu>cu>: >>>>>>>>>> >>>>>>>>>>> El 2020-10-26 12:23, 胡 玮文 escribió: >>>>>>>>>>>>> 在 2020年10月26日，23:29，Ing. Luis Felipe Domínguez Vega >>>>>>>>>>>>> <luis.dominguez(a)desoft.cu> 写道： >>>>>>>>>>>>> >>>>>>>>>>>>> mgr: fond-beagle(active, since 39s) >>>>>>>>>>>> >>>>>>>>>>>> Your manager seems crash looping, it only started since 39s. >>>>>>>>>>>> Looking >>>>>>>>>>>> at mgr logs may help you identify why your cluster is not >>>>>>>>>>>> recovering. >>>>>>>>>>>> You may hit some bug in mgr. >>>>>>>>>>> Noup, I'm restarting the ceph manager because they eat all >>>>>>>>>>> server RAM and then i have an script that when i have 1GB >>>>>>>>>>> of Free Ram (the server has 94 Gb of RAM) then restart >>>>>>>>>>> the manager, i dont known why and the logs of manager >>>>>>>>>>> are: >>>>>>>>>>> >>>>>>>>>>> ----------------------------------- >>>>>>>>>>> root@fond-beagle:/var/lib/ceph/mon/ceph-fond-beagle/store.db# >>>>>>>>>>> tail -f /var/log/ceph/ceph-mgr.fond-beagle.log >>>>>>>>>>> 2020-10-26T12:54:12.497-0400 7f2a8112b700 0 >>>>>>>>>>> log_channel(cluster) log [DBG] : pgmap v584: 2305 pgs: 4 >>>>>>>>>>> active+undersized+degraded+remapped, 4 >>>>>>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>>>>>> active+clean, 5 active+undersized+degraded, 34 incomplete, >>>>>>>>>>> 154 unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB >>>>>>>>>>> avail; 347248/2606900 objects degraded (13.320%); >>>>>>>>>>> 107570/2606900 objects misplaced (4.126%); 19/404328 >>>>>>>>>>> objects unfound (0.005%) >>>>>>>>>>> 2020-10-26T12:54:12.497-0400 7f2a8112b700 0 >>>>>>>>>>> log_channel(cluster) do_log log to syslog >>>>>>>>>>> 2020-10-26T12:54:14.501-0400 7f2a8112b700 0 >>>>>>>>>>> log_channel(cluster) log [DBG] : pgmap v585: 2305 pgs: 4 >>>>>>>>>>> active+undersized+degraded+remapped, 4 >>>>>>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>>>>>> active+clean, 5 active+undersized+degraded, 34 incomplete, >>>>>>>>>>> 154 unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB >>>>>>>>>>> avail; 347248/2606900 objects degraded (13.320%); >>>>>>>>>>> 107570/2606900 objects misplaced (4.126%); 19/404328 >>>>>>>>>>> objects unfound (0.005%) >>>>>>>>>>> 2020-10-26T12:54:14.501-0400 7f2a8112b700 0 >>>>>>>>>>> log_channel(cluster) do_log log to syslog >>>>>>>>>>> 2020-10-26T12:54:16.517-0400 7f2a8112b700 0 >>>>>>>>>>> log_channel(cluster) log [DBG] : pgmap v586: 2305 pgs: 4 >>>>>>>>>>> active+undersized+degraded+remapped, 4 >>>>>>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>>>>>> active+clean, 5 active+undersized+degraded, 34 incomplete, >>>>>>>>>>> 154 unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB >>>>>>>>>>> avail; 347248/2606900 objects degraded (13.320%); >>>>>>>>>>> 107570/2606900 objects misplaced (4.126%); 19/404328 >>>>>>>>>>> objects unfound (0.005%) >>>>>>>>>>> 2020-10-26T12:54:16.517-0400 7f2a8112b700 0 >>>>>>>>>>> log_channel(cluster) do_log log to syslog >>>>>>>>>>> 2020-10-26T12:54:18.521-0400 7f2a8112b700 0 >>>>>>>>>>> log_channel(cluster) log [DBG] : pgmap v587: 2305 pgs: 4 >>>>>>>>>>> active+undersized+degraded+remapped, 4 >>>>>>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>>>>>> active+clean, 5 active+undersized+degraded, 34 incomplete, >>>>>>>>>>> 154 unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB >>>>>>>>>>> avail; 347248/2606900 objects degraded (13.320%); >>>>>>>>>>> 107570/2606900 objects misplaced (4.126%); 19/404328 >>>>>>>>>>> objects unfound (0.005%) >>>>>>>>>>> 2020-10-26T12:54:18.521-0400 7f2a8112b700 0 >>>>>>>>>>> log_channel(cluster) do_log log to syslog >>>>>>>>>>> 2020-10-26T12:54:20.537-0400 7f2a8112b700 0 >>>>>>>>>>> log_channel(cluster) log [DBG] : pgmap v588: 2305 pgs: 4 >>>>>>>>>>> active+undersized+degraded+remapped, 4 >>>>>>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>>>>>> active+clean, 5 active+undersized+degraded, 34 incomplete, >>>>>>>>>>> 154 unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB >>>>>>>>>>> avail; 347248/2606900 objects degraded (13.320%); >>>>>>>>>>> 107570/2606900 objects misplaced (4.126%); 19/404328 >>>>>>>>>>> objects unfound (0.005%) >>>>>>>>>>> 2020-10-26T12:54:20.537-0400 7f2a8112b700 0 >>>>>>>>>>> log_channel(cluster) do_log log to syslog >>>>>>>>>>> 2020-10-26T12:54:22.541-0400 7f2a8112b700 0 >>>>>>>>>>> log_channel(cluster) log [DBG] : pgmap v589: 2305 pgs: 4 >>>>>>>>>>> active+undersized+degraded+remapped, 4 >>>>>>>>>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>>>>>>>>> active+clean, 5 active+undersized+degraded, 34 incomplete, >>>>>>>>>>> 154 unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB >>>>>>>>>>> avail; 347248/2606900 objects degraded (13.320%); >>>>>>>>>>> 107570/2606900 objects misplaced (4.126%); 19/404328 >>>>>>>>>>> objects unfound (0.005%) >>>>>>>>>>> 2020-10-26T12:54:22.541-0400 7f2a8112b700 0 >>>>>>>>>>> log_channel(cluster) do_log log to syslog >>>>>>>>>>> --------------- >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> ceph-users mailing list -- ceph-users(a)ceph.io >>>>>>>>>>> To unsubscribe send an email to ceph-users-leave(a)ceph.io >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> ceph-users mailing list -- ceph-users(a)ceph.io >>>>>>>>>> To unsubscribe send an email to ceph-users-leave(a)ceph.io >>>>>>>>> >>>>>>>>> Ok i will do that... but the thing is that the cluster not >>>>>>>>> show >>>>>>>>> recovering, not show that are doing nothing, like to show >>>>>>>>> the recovering info on ceph -s command, and then i dont >>>>>>>>> know >>>>>>>>> if is recovering or doing what? > _______________________________________________ > ceph-users mailing list -- ceph-users(a)ceph.io > To unsubscribe send an email to ceph-users-leave(a)ceph.io

The ceph mon logs... many of this unstoppable on my log: ------------------------------------------------------ 2020-10-26T15:40:28.875729-0400 osd.23 [WRN] slow request osd_op(client.86168166.0:9023356 5.56 5.1cd5a6d6 (undecoded) ondisk+retry+write+known_if_redirected e159644) initiated 2020-10-26T15:57:51.597394+0000 currently queued for pg 2020-10-26T15:40:28.875745-0400 osd.23 [WRN] slow request osd_op(client.86168166.0:9071950 5.56 5.1cd5a6d6 (undecoded) ondisk+retry+write+known_if_redirected e159644) initiated 2020-10-26T15:57:51.599033+0000 currently queued for pg 2020-10-26T15:40:28.875761-0400 osd.23 [WRN] slow request osd_op(client.86168166.0:9078184 5.56 5.1cd5a6d6 (undecoded) ondisk+retry+write+known_if_redirected e159644) initiated 2020-10-26T15:57:51.600244+0000 currently queued for pg 2020-10-26T15:40:28.875781-0400 osd.23 [WRN] slow request osd_op(client.86168166.0:9130749 5.56 5.1cd5a6d6 (undecoded) ondisk+write+known_if_redirected e159652) initiated 2020-10-26T15:58:36.457562+0000 currently queued for pg 2020-10-26T15:40:28.878905-0400 osd.23 [WRN] slow request osd_op(client.86168166.0:9130780 5.56 5.1cd5a6d6 (undecoded) ondisk+write+known_if_redirected e159653) initiated 2020-10-26T16:01:11.470983+0000 currently queued for pg 2020-10-26T15:40:28.878936-0400 osd.23 [WRN] slow request osd_op(client.86168166.0:9130812 5.56 5.1cd5a6d6 (undecoded) ondisk+write+known_if_redirected e159653) initiated 2020-10-26T16:03:51.480523+0000 currently queued for pg ------------------------------------------------------------ El 2020-10-26 15:57, Eugen Block escribió: > The recovery process (ceph -s) is independent of the MGR service but > only depends on the MON service. It seems you only have the one MON, > if the MGR is overloading it (not clear why) it could help to leave > MGR off and see if the MON service then has enough RAM to proceed with > the recovery. Do you have any chance to add two more MONs? A single > MON is of course a single point of failure. > > > Zitat von "Ing. Luis Felipe Domínguez Vega" <luis.dominguez(a)desoft.cu>cu>: > >> El 2020-10-26 15:16, Eugen Block escribió: >>> You could stop the MGRs and wait for the recovery to finish, MGRs are >>> not a critical component. You won’t have a dashboard or metrics >>> during/of that time but it would prevent the high RAM usage. >>> >>> Zitat von "Ing. Luis Felipe Domínguez Vega" >>> <luis.dominguez(a)desoft.cu>cu>: >>> >>>> El 2020-10-26 12:23, 胡 玮文 escribió: >>>>>> 在 2020年10月26日，23:29，Ing. Luis Felipe Domínguez Vega >>>>>> <luis.dominguez(a)desoft.cu> 写道： >>>>>> >>>>>> mgr: fond-beagle(active, since 39s) >>>>> >>>>> Your manager seems crash looping, it only started since 39s. >>>>> Looking >>>>> at mgr logs may help you identify why your cluster is not >>>>> recovering. >>>>> You may hit some bug in mgr. >>>> Noup, I'm restarting the ceph manager because they eat all server >>>> RAM and then i have an script that when i have 1GB of Free Ram (the >>>> server has 94 Gb of RAM) then restart the manager, i dont known >>>> why and the logs of manager are: >>>> >>>> ----------------------------------- >>>> root@fond-beagle:/var/lib/ceph/mon/ceph-fond-beagle/store.db# tail >>>> -f /var/log/ceph/ceph-mgr.fond-beagle.log >>>> 2020-10-26T12:54:12.497-0400 7f2a8112b700 0 log_channel(cluster) >>>> log [DBG] : pgmap v584: 2305 pgs: 4 >>>> active+undersized+degraded+remapped, 4 >>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>> active+clean, 5 active+undersized+degraded, 34 incomplete, 154 >>>> unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB avail; >>>> 347248/2606900 objects degraded (13.320%); 107570/2606900 objects >>>> misplaced (4.126%); 19/404328 objects unfound (0.005%) >>>> 2020-10-26T12:54:12.497-0400 7f2a8112b700 0 log_channel(cluster) >>>> do_log log to syslog >>>> 2020-10-26T12:54:14.501-0400 7f2a8112b700 0 log_channel(cluster) >>>> log [DBG] : pgmap v585: 2305 pgs: 4 >>>> active+undersized+degraded+remapped, 4 >>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>> active+clean, 5 active+undersized+degraded, 34 incomplete, 154 >>>> unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB avail; >>>> 347248/2606900 objects degraded (13.320%); 107570/2606900 objects >>>> misplaced (4.126%); 19/404328 objects unfound (0.005%) >>>> 2020-10-26T12:54:14.501-0400 7f2a8112b700 0 log_channel(cluster) >>>> do_log log to syslog >>>> 2020-10-26T12:54:16.517-0400 7f2a8112b700 0 log_channel(cluster) >>>> log [DBG] : pgmap v586: 2305 pgs: 4 >>>> active+undersized+degraded+remapped, 4 >>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>> active+clean, 5 active+undersized+degraded, 34 incomplete, 154 >>>> unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB avail; >>>> 347248/2606900 objects degraded (13.320%); 107570/2606900 objects >>>> misplaced (4.126%); 19/404328 objects unfound (0.005%) >>>> 2020-10-26T12:54:16.517-0400 7f2a8112b700 0 log_channel(cluster) >>>> do_log log to syslog >>>> 2020-10-26T12:54:18.521-0400 7f2a8112b700 0 log_channel(cluster) >>>> log [DBG] : pgmap v587: 2305 pgs: 4 >>>> active+undersized+degraded+remapped, 4 >>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>> active+clean, 5 active+undersized+degraded, 34 incomplete, 154 >>>> unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB avail; >>>> 347248/2606900 objects degraded (13.320%); 107570/2606900 objects >>>> misplaced (4.126%); 19/404328 objects unfound (0.005%) >>>> 2020-10-26T12:54:18.521-0400 7f2a8112b700 0 log_channel(cluster) >>>> do_log log to syslog >>>> 2020-10-26T12:54:20.537-0400 7f2a8112b700 0 log_channel(cluster) >>>> log [DBG] : pgmap v588: 2305 pgs: 4 >>>> active+undersized+degraded+remapped, 4 >>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>> active+clean, 5 active+undersized+degraded, 34 incomplete, 154 >>>> unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB avail; >>>> 347248/2606900 objects degraded (13.320%); 107570/2606900 objects >>>> misplaced (4.126%); 19/404328 objects unfound (0.005%) >>>> 2020-10-26T12:54:20.537-0400 7f2a8112b700 0 log_channel(cluster) >>>> do_log log to syslog >>>> 2020-10-26T12:54:22.541-0400 7f2a8112b700 0 log_channel(cluster) >>>> log [DBG] : pgmap v589: 2305 pgs: 4 >>>> active+undersized+degraded+remapped, 4 >>>> active+recovery_unfound+undersized+degraded+remapped, 2104 >>>> active+clean, 5 active+undersized+degraded, 34 incomplete, 154 >>>> unknown; 1.7 TiB data, 2.9 TiB used, 21 TiB / 24 TiB avail; >>>> 347248/2606900 objects degraded (13.320%); 107570/2606900 objects >>>> misplaced (4.126%); 19/404328 objects unfound (0.005%) >>>> 2020-10-26T12:54:22.541-0400 7f2a8112b700 0 log_channel(cluster) >>>> do_log log to syslog >>>> --------------- >>>> _______________________________________________ >>>> ceph-users mailing list -- ceph-users(a)ceph.io >>>> To unsubscribe send an email to ceph-users-leave(a)ceph.io >>> >>> >>> _______________________________________________ >>> ceph-users mailing list -- ceph-users(a)ceph.io >>> To unsubscribe send an email to ceph-users-leave(a)ceph.io >> >> Ok i will do that... but the thing is that the cluster not show >> recovering, not show that are doing nothing, like to show the >> recovering info on ceph -s command, and then i dont know if is >> recovering or doing what?