Recently I deployed a small ceph cluster using cephadm.
In this cluster, I have 3 OSD nodes with 8 HDDs Hitachi (9.1 TiB), 4 NVMes
Micron_9300 (2.9 TiB), and 2 NVMes Intel Optane P4800X (375 GiB). I want to
use spinning disks for the data block, 2.9 NVMes for the block.DB and the
intel Optane for the block.wal.
I tried with a spec file and also via the ceph dashboard but I encountered
I would expect 1 lv on every data disk, 4 lv on wal disks, and 2 lv on DB
disks. The problem arises on DB disks where only 1 lv gets created.
After some debugging, I think that the problem is generated when the VG
gets divided into 2. I have 763089 Total PE and the first LV was created
using 381545 PE (round-up for 763089/2). Thanks to that, the creation of
the second LV fails: Volume group
"ceph-c7078851-d3c1-4745-96b6-f98a45d3da93" has insufficient free space
(381544 extents): 381545 required.
Is this an expected behavior or not? Should I create the LVs by myself?
Gheorghe Asachi Technical University of Iasi
Show replies by date