Hello Eugen, sorry but I reinstalled rasosgw on both zones. Anycase when I faced the issue my situation was as follows: - site A zonegroup master - site B replicated - removed zone, radosgw,zonegroup and rgw pools on site B - installed again rgw on site B - pulling from from site A, has created on siteb the zone and did not allow me to create the zone on site b Ignazio Il Mar 31 Mar 2020, 09:17 Eugen Block <eblock@nde.ag> ha scritto:

Hi,

could you share the exact steps you took to change the configuration? Did you clean up the previous configuration before reconfiguring the remote site?

Does the output of

radosgw-admin zonegroup get radosgw-admin zone get

reflect those changes?

Regards, Eugen

Zitat von Ignazio Cassano <ignaziocassano@gmail.com>:

...

Hello, I have configured a multisite ceph. The master zone has not changed but on the destination zone I had some problems. On the destination zone I cleaned and reinstalled the radosgw, but trying to assing the same zone name it had before reinstallation does not work (radosgw does not start). I changed its zone name and radosgw starts, but the master is using the old name when I try to execute:

radosgw-admin period update commit

Please, how can I solve this problem ? Thanks Ignazi _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io

_______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io