On 4/5/21 3:27 PM, 胡 玮文 wrote:
在 2021年4月5日,19:29,Adrian Sevcenco
<Adrian.Sevcenco(a)cern.ch> 写道:
Hi! How/where can i change the image configured for a service?
I tried to modify /var/lib/ceph/<fsid>/<service_name>/unit.{image,run}
but after restarting
ceph orch ps shows that the service use the same old image.
Hi Adrian,
Hi!
Try “ceph config set <target> container_image
<your image>” where <target> can be global, osd, osd.1, etc. Then redeploy
yup, i did
it with “ceph orch” series commands.
well,
already tried .. unfortunately because this is a test "cluster" on my desktop
i have a single mgr, and it seems that there is a requirement of having a second standby
mgr.
i tried to start a second mgr, but because of listening port clash i can't... and i
see not such option
in ceph config show
so, i was hopping to be able to make the service (podman) to restart with the new image
..
and no joy so far ..
Thanks a lot!
Adrian
What other
configuration locations are there for the ceph components
beside /etc/ceph (which is quite sparse) and /var/lib/ceph/<fsid> ?
Monitor configuration database.
https://docs.ceph.com/en/latest/rados/configuration/ceph-conf/#monitor-conf…
<https://docs.ceph.com/en/latest/rados/configuration/ceph-conf/#monitor-configuration-database>
Weiwen Hu
> Thank you!
> Adrian