On Sat, Sep 7, 2019 at 11:31 AM Robert Sander <r.sander@heinlein-support.de> wrote:

Hi,

In the Documentation on https://docs.ceph.com/docs/nautilus/rbd/iscsi-target-cli/ it is stated that you need at least CentOS 7.5 with at least kernel 4.16 and to install tcmu-runner and ceph-iscsi "from your Linux distribution's software repository".

CentOS does not know about tcmu-runner nor ceph-iscsi.

CentOS 7 doesn't offer a signed tcmu-runner so you can either build it yourself or use an unsigned "development" RPM that we build from here [1]. As for ceph-iscsi, you can get the official release RPMs from here [2].

Where do I get these RPMs from?

Regards -- Robert Sander Heinlein Support GmbH Schwedter Str. 8/9b, 10119 Berlin

http://www.heinlein-support.de

Tel: 030 / 405051-43 Fax: 030 / 405051-19

Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

_______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io

[1] https://shaman.ceph.com/repos/tcmu-runner/ [2] http://download.ceph.com/ceph-iscsi/3/rpm/el7/ -- Jason