You should be able to increase the ports by setting the respective config option. Here's the get output from a Pacific cluster: storage01:~ # ceph config get osd ms_bind_port_min 6800 storage01:~ # ceph config get osd ms_bind_port_max 7300 Changing the ports should be as simple as: ceph config set global ms_bind_port_max {SOME_HIGHER_VALUE_THAN_DEFAULT} I haven't used that in quite a while, so there might be some pitfalls I'm not aware of. Zitat von Joachim Kraftmayer <joachim.kraftmayer@clyso.com>:

Hi Szabo, small note the link you refer to is 8 years old.

for ceph reef:

The default range is 6800:7568.

https://docs.ceph.com/en/reef/rados/configuration/network-config-ref/#bind

Regards, Joachim

joachim.kraftmayer@clyso.com

www.clyso.com

Hohenzollernstr. 27, 80801 Munich

Utting | HR: Augsburg | HRB: 25866 | USt. ID-Nr.: DE275430677

Am Mo., 16. Dez. 2024 um 09:26 Uhr schrieb Szabo, Istvan (Agoda) < Istvan.Szabo@agoda.com>:

...

Hi,

Going through this documentation: https://docs.redhat.com/en/documentation/red_hat_ceph_storage/2/html/configu...

Wonder the 6800-7100 range consist how many osd normally? How do you size this in ceph?

Thank you _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io

_______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-leave@ceph.io