Since you deleted the stack this is meaningless.  You can simply delete the volumes from pool using the rbd.  

The proper way to delete is to delete them before destroying the stack.   If the stack is alive and you have issues deleting, you can take two approach.

1) run openstack volume delete with --debug to see what happens.

2) use rbd status pool/volume to see is there a watcher to the volume.  If yes, then the instence has not been removed/not properly removed.

Thanks,
Suresh

On Fri, Aug 16, 2019, 8:21 PM Nerurkar, Ruchir (Nokia - US/Mountain View) <ruchir.nerurkar@nokia.com> wrote:

Hello,

 

So I am able to install Ceph on CentOS 7.4 and I can successfully integrate my Openstack testbed with it.

 

However, I am facing with an issue recently where after deleting stack, my cinder volumes are not getting deleted and they are getting stuck.

 

Any idea on this issue?

 

Best Regards,

Ruchir Nerurkar

857-701-3405

 

From: Götz Reinicke <goetz.reinicke@filmakademie.de>
Sent: Monday, August 12, 2019 1:17 PM
To: Nerurkar, Ruchir (Nokia - US/Mountain View) <ruchir.nerurkar@nokia.com>
Cc: ceph-users@ceph.io
Subject: Re: [ceph-users] Request to guide on ceph-deploy install command for luminuous 12.2.12 release

 

Hi,



Am 07.08.2019 um 20:20 schrieb Nerurkar, Ruchir (Nokia - US/Mountain View) <ruchir.nerurkar@nokia.com>:

 

Hello,

 

I work in Nokia as a Software QA engineer and I am trying to install Ceph on centOS 7.4 version.

 

Do you have to stick at 7.4?

 



But I am getting this error with the following output: -

 

vmgoscephcontrollerluminous][WARNIN] Error: Package: 2:ceph-common-12.2.12-0.el7.x86_64 (Ceph)

[mvmgoscephcontrollerluminous][WARNIN]            Requires: liblz4.so.1()(64bit)

[mvmgoscephcontrollerluminous][WARNIN] Error: Package: 2:ceph-osd-12.2.12-0.el7.x86_64 (Ceph)

[mvmgoscephcontrollerluminous][WARNIN]            Requires: liblz4.so.1()(64bit)

[mvmgoscephcontrollerluminous][WARNIN] Error: Package: 2:ceph-base-12.2.12-0.el7.x86_64 (Ceph)

[mvmgoscephcontrollerluminous][WARNIN]            Requires: gperftools-libs >= 2.6.1

[mvmgoscephcontrollerluminous][WARNIN]            Available: gperftools-libs-2.4-8.el7.i686 (base)

[mvmgoscephcontrollerluminous][DEBUG ]  You could try using --skip-broken to work around the problem

[mvmgoscephcontrollerluminous][WARNIN]                gperftools-libs = 2.4-8.el7

[mvmgoscephcontrollerluminous][WARNIN] Error: Package: 2:ceph-mon-12.2.12-0.el7.x86_64 (Ceph)

[mvmgoscephcontrollerluminous][WARNIN]            Requires: liblz4.so.1()(64bit)

[mvmgoscephcontrollerluminous][WARNIN] Error: Package: 2:ceph-base-12.2.12-0.el7.x86_64 (Ceph)

[mvmgoscephcontrollerluminous][WARNIN]            Requires: liblz4.so.1()(64bit)

[mvmgoscephcontrollerluminous][DEBUG ]  You could try running: rpm -Va --nofiles --nodigest

[mvmgoscephcontrollerluminous][ERROR ] RuntimeError: command returned non-zero exit status: 1

[ceph_deploy][ERROR ] RuntimeError: Failed to execute command: yum -y install ceph ceph-radosgw

 

Does anyone know about this issue like how can I resolve package dependencies?

 

My first shot: Update Centos to min. 7.5 (which includes gperftools-libs-2.6.1)

 

And install lz4 too.

 

                Regards . Götz

 

 

 

 

_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-leave@ceph.io