This is the eighth update to the Ceph Nautilus release series. This release
fixes issues across a range of subsystems. We recommend that all users upgrade
to this release. Please note the following important changes in this
release; as always the full changelog is posted at:
https://ceph.io/releases/v14-2-8-nautilus-released
Notable Changes
---------------
* The default value of `bluestore_min_alloc_size_ssd` has been changed
to 4K to improve performance across all workloads.
* The following OSD memory config options related to bluestore cache autotuning can now
be configured during runtime:
- osd_memory_base (default: 768 MB)
- osd_memory_cache_min (default: 128 MB)
- osd_memory_expected_fragmentation (default: 0.15)
- osd_memory_target (default: 4 GB)
The above options can be set with::
ceph config set osd <option> <value>
* The MGR now accepts `profile rbd` and `profile rbd-read-only` user caps.
These caps can be used to provide users access to MGR-based RBD functionality
such as `rbd perf image iostat` an `rbd perf image iotop`.
* The configuration value `osd_calc_pg_upmaps_max_stddev` used for upmap
balancing has been removed. Instead use the mgr balancer config
`upmap_max_deviation` which now is an integer number of PGs of deviation
from the target PGs per OSD. This can be set with a command like
`ceph config set mgr mgr/balancer/upmap_max_deviation 2`. The default
`upmap_max_deviation` is 1. There are situations where crush rules
would not allow a pool to ever have completely balanced PGs. For example, if
crush requires 1 replica on each of 3 racks, but there are fewer OSDs in 1 of
the racks. In those cases, the configuration value can be increased.
* RGW: a mismatch between the bucket notification documentation and the actual
message format was fixed. This means that any endpoints receiving bucket
notification, will now receive the same notifications inside a JSON array
named 'Records'. Note that this does not affect pulling bucket notification
from a subscription in a 'pubsub' zone, as these are already wrapped inside
that array.
* CephFS: multiple active MDS forward scrub is now rejected. Scrub currently
only is permitted on a file system with a single rank. Reduce the ranks to one
via `ceph fs set <fs_name> max_mds 1`.
* Ceph now refuses to create a file system with a default EC data pool. For
further explanation, see:
https://docs.ceph.com/docs/nautilus/cephfs/createfs/#creating-pools
* Ceph will now issue a health warning if a RADOS pool has a `pg_num`
value that is not a power of two. This can be fixed by adjusting
the pool to a nearby power of two::
ceph osd pool set <pool-name> pg_num <new-pg-num>
Alternatively, the warning can be silenced with::
ceph config set global mon_warn_on_pool_pg_num_not_power_of_two false
Getting Ceph
------------
* Git at git://github.com/ceph/ceph.git
* Tarball at http://download.ceph.com/tarballs/ceph-14.2.8.tar.gz
* For packages, see http://docs.ceph.com/docs/master/install/get-packages/
* Release git sha1: 2d095e947a02261ce61424021bb43bd3022d35cb
--
Abhishek Lekshmanan
SUSE Software Solutions Germany GmbH
GF: Felix Imendörffer HRB 21284 (AG Nürnberg)
Hello Samuel,
we from croit.io don't use NFS to boot up Servers. We copy the OS directly
into the RAM (approximately 0.5-1GB). Think of it like a container, you
start it and throw it away when you no longer need it.
This way we can save the slots of OS harddisks to add more storage per node
and reduce overall costs as 1GB ram is cheaper then an OS disk and consumes
less power.
If our management node is down, nothing will happen to the cluster. No
impact, no downtime. However, you do need the mgmt node to boot up the
cluster. So after a very rare total power outage, your first system would
be the mgmt node and then the cluster itself. But again, if you configure
your systems correct, no manual work is required to recover from that. For
everything else, it is possible (but definitely not needed) to deploy our
mgmt node in active/passive HA.
We have multiple hundred installations worldwide in production
environments. Our strong PXE knowledge comes from more than 20 years of
datacenter hosting experience and it never ever failed us in the last >10
years.
The main benefits out of that:
- Immutable OS freshly booted: Every host has exactly the same version,
same library, kernel, Ceph versions,...
- OS is heavily tested by us: Every croit deployment has exactly the same
image. We can find errors much faster and hit much fewer errors.
- Easy Update: Updating OS, Ceph or anything else is just a node reboot.
No cluster downtime, No service Impact, full automatic handling by our mgmt
Software.
- No need to install OS: No maintenance costs, no labor required, no other
OS management required.
- Centralized Logs/Stats: As it is booted in memory, all logs and
statistics are collected on a central place for easy access.
- Easy to scale: It doesn't matter if you boot 3 oder 300 nodes, all
boot the exact same image in a few seconds.
.. lots more
Please do not hesitate to contact us directly. We always try to offer an
excellent service and are strongly customer oriented.
--
Martin Verges
Managing director
Mobile: +49 174 9335695
E-Mail: martin.verges(a)croit.io
Chat: https://t.me/MartinVerges
croit GmbH, Freseniusstr. 31h, 81247 Munich
CEO: Martin Verges - VAT-ID: DE310638492
Com. register: Amtsgericht Munich HRB 231263
Web: https://croit.io
YouTube: https://goo.gl/PGE1Bx
Am Sa., 21. März 2020 um 13:53 Uhr schrieb huxiaoyu(a)horebdata.cn <
huxiaoyu(a)horebdata.cn>:
> Hello， Martin，
>
> I notice that Croit advocate the use of ceph cluster without OS disks, but
> with PXE boot.
>
> Do you use a NFS server to serve the root file system for each node? such
> as hosting configuration files, user and password, log files, etc. My
> question is, will the NFS server be a single point of failure? If the NFS
> server goes down, the network experience any outage, ceph nodes may not be
> able to write to the local file systems, possibly leading to service outage.
>
> How do you deal with the above potential issues in production? I am a bit
> worried...
>
> best regards,
>
> samuel
>
>
>
>
> ------------------------------
> huxiaoyu(a)horebdata.cn
>
>
>
I have a hybrid environment and need to share with both Linux and
Windows clients. For my previous iterations of file storage, I exported
nfs and samba shares directly from my monolithic file server. All Linux
clients used nfs and all Windows clients used samba. Now that I've
switched to ceph, things are a bit more complicated. I built a gateway
to export nfs and samba as needed, and connect that as a client to my
ceph cluster.
After having file locking problems with kernel nfs, I made the switch to
nfs-ganesha, which has helped immensely. For Linux clients that have
high I/O needs, like desktops and some web servers, I connect to ceph
directly for those shares. For all other Linux needs, I use nfs from the
gateway. For all Windows clients (desktops and a small number of
servers), I use samba exported from the gateway.
Since my ceph cluster went live in August, I have had some kind of
strange (to me) error at least once a week, almost always related to the
gateway client. Last night, it was MDS_CLIENT_OLDEST_TID. Since we're on
Spring Break at my university and not very busy, I decided to
unmount/remount the ceph share, requiring stopping nfs and samba
services. Stopping nfs-ganesha took a while, but it finally completed
with no complaints from the ceph cluster. Stopping samba took longer and
gave me MDS_SLOW_REQUEST and MDS_CLIENT_LATE_RELEASE on the mds. It
finally finished, and I was able to unmount/remount the ceph share and
that finally cleared all the errors.
This is leading me to believe that samba on the gateway and all the
clients attaching to that is putting a strain on the connection back to
ceph. Which finally brings me to my question: is there a better way to
export samba to my clients using the ceph back end? Or is this as good
as it gets and I just have to put up with the seemingly frequent errors?
I can live with the errors and have been able to handle them so far, but
I know people who have much bigger clusters and many more clients than
me (by an order of magnitude) and don't see nearly as many errors as I
do. Which is why I'm trying to figure out what is special about my setup.
All my ceph nodes are running latest nautilus on Centos 7 (I just
updated last week to 14.2.8), as is the gateway host. I'm mounting ceph
directly on the gateway (by way of the kernel using cephfs, not
rados/rbd) to a single mount point and exporting from there.
My searches so far have not turned up anything extraordinarily useful,
so I'm asking for some guidance here. Any advice is welcome.
Thanks.
Seth
--
Seth Galitzer
Systems Coordinator
Computer Science Department
Kansas State University
http://www.cs.ksu.edu/~sgsax
sgsax(a)ksu.edu
785-532-7790
We've run into a problem on our test cluster this afternoon which is running Nautilus (14.2.2). It seems that any time PGs move on the cluster (from marking an OSD down, setting the primary-affinity to 0, or by using the balancer), a large number of the OSDs in the cluster peg the CPU cores they're running on for a while which causes slow requests. From what I can tell it appears to be related to slow peering caused by osd_pg_create() taking a long time.
This was seen on quite a few OSDs while waiting for peering to complete:
# ceph daemon osd.3 ops
{
"ops": [
{
"description": "osd_pg_create(e179061 287.7a:177739 287.9a:177739 287.e2:177739 287.e7:177739 287.f6:177739 287.187:177739 287.1aa:177739 287.216:177739 287.306:177739 287.3e6:177739)",
"initiated_at": "2019-08-27 14:34:46.556413",
"age": 318.25234538000001,
"duration": 318.25241895300002,
"type_data": {
"flag_point": "started",
"events": [
{
"time": "2019-08-27 14:34:46.556413",
"event": "initiated"
},
{
"time": "2019-08-27 14:34:46.556413",
"event": "header_read"
},
{
"time": "2019-08-27 14:34:46.556299",
"event": "throttled"
},
{
"time": "2019-08-27 14:34:46.556456",
"event": "all_read"
},
{
"time": "2019-08-27 14:35:12.456901",
"event": "dispatched"
},
{
"time": "2019-08-27 14:35:12.456903",
"event": "wait for new map"
},
{
"time": "2019-08-27 14:40:01.292346",
"event": "started"
}
]
}
},
...snip...
{
"description": "osd_pg_create(e179066 287.7a:177739 287.9a:177739 287.e2:177739 287.e7:177739 287.f6:177739 287.187:177739 287.1aa:177739 287.216:177739 287.306:177739 287.3e6:177739)",
"initiated_at": "2019-08-27 14:35:09.908567",
"age": 294.900191001,
"duration": 294.90068416899999,
"type_data": {
"flag_point": "delayed",
"events": [
{
"time": "2019-08-27 14:35:09.908567",
"event": "initiated"
},
{
"time": "2019-08-27 14:35:09.908567",
"event": "header_read"
},
{
"time": "2019-08-27 14:35:09.908520",
"event": "throttled"
},
{
"time": "2019-08-27 14:35:09.908617",
"event": "all_read"
},
{
"time": "2019-08-27 14:35:12.456921",
"event": "dispatched"
},
{
"time": "2019-08-27 14:35:12.456923",
"event": "wait for new map"
}
]
}
}
],
"num_ops": 6
}
That "wait for new map" message made us think something was getting hung up on the monitors, so we restarted them all without any luck.
I'll keep investigating, but so far my google searches aren't pulling anything up so I wanted to see if anyone else is running into this?
Thanks,
Bryan
We have been benchmarking CephFS and comparing it Rados to see the performance difference and how much overhead CephFS has. However, we are getting odd results when using more than 1 OSD server (each OSDS has only one disk) using CephFS but using Rados everything appears normal. These tests are run on the same Ceph Cluster.
CephFS Rados
OSDS Thread 16 Thread 16
1 289 316
2 139 546
3 143 728
4 142 844
CephFS is being benchmarked using: fio --name=seqwrite --rw=write --direct=1 --ioengine=libaio --bs=4M --numjobs=16 --size=1G --group_reporting
Rados is being benchmarked using: rados bench -p cephfs_data 10 write -t 16
If you could provide some help or insight into why this is happening or how to stop it, that would be much appreciated.
Kind regards,
Gabryel
We're happy to announce the first stable release of Octopus v15.2.0.
There are a lot of changes and new features added, we advise everyone to
read the release notes carefully, and in particular the upgrade notes,
before upgrading. Please refer to the official blog entry
https://ceph.io/releases/v15-2-0-octopus-released/ for a detailed
version with links & changelog.
This release wouldn't have been possible without the support of the
community, this release saw contributions from over 330 developers & 80
organizations, and we thank everyone for making this release happen.
Major Changes from Nautilus
---------------------------
General
~~~~~~~
* A new deployment tool called **cephadm** has been introduced that
integrates Ceph daemon deployment and management via containers
into the orchestration layer.
* Health alerts can now be muted, either temporarily or permanently.
* Health alerts are now raised for recent Ceph daemons crashes.
* A simple 'alerts' module has been introduced to send email
health alerts for clusters deployed without the benefit of an
existing external monitoring infrastructure.
* Packages are built for the following distributions:
- CentOS 8
- CentOS 7 (partial--see below)
- Ubuntu 18.04 (Bionic)
- Debian Buster
- Container images (based on CentOS 8)
Note that the dashboard, prometheus, and restful manager modules
will not work on the CentOS 7 build due to Python 3 module
dependencies that are missing in CentOS 7.
Besides this packages built by the community will also available for the
following distros:
- Fedora (33/rawhide)
- openSUSE (15.2, Tumbleweed)
Dashboard
~~~~~~~~~
The mgr-dashboard has gained a lot of new features and functionality:
* UI Enhancements
- New vertical navigation bar
- New unified sidebar: better background task and events notification
- Shows all progress mgr module notifications
- Multi-select on tables to perform bulk operations
* Dashboard user account security enhancements
- Disabling/enabling existing user accounts
- Clone an existing user role
- Users can change their own password
- Configurable password policies: Minimum password complexity/length
requirements
- Configurable password expiration
- Change password after first login
New and enhanced management of Ceph features/services:
* OSD/device management
- List all disks associated with an OSD
- Add support for blinking enclosure LEDs via the orchestrator
- List all hosts known by the orchestrator
- List all disks and their properties attached to a node
- Display disk health information (health prediction and SMART data)
- Deploy new OSDs on new disks/hosts
- Display and allow sorting by an OSD's default device class in the OSD
table
- Explicitly set/change the device class of an OSD, display and sort OSDs by
device class
* Pool management
- Viewing and setting pool quotas
- Define and change per-pool PG autoscaling mode
* RGW management enhancements
- Enable bucket versioning
- Enable MFA support
- Select placement target on bucket creation
* CephFS management enhancements
- CephFS client eviction
- CephFS snapshot management
- CephFS quota management
- Browse CephFS directory
* iSCSI management enhancements
- Show iSCSI GW status on landing page
- Prevent deletion of IQNs with open sessions
- Display iSCSI "logged in" info
* Prometheus alert management
- List configured Prometheus alerts
RADOS
~~~~~
* Objects can now be brought in sync during recovery by copying only
the modified portion of the object, reducing tail latencies during
recovery.
* Ceph will allow recovery below *min_size* for Erasure coded pools,
wherever possible.
* The PG autoscaler feature introduced in Nautilus is enabled for
new pools by default, allowing new clusters to autotune *pg num*
without any user intervention. The default values for new pools
and RGW/CephFS metadata pools have also been adjusted to perform
well for most users.
* BlueStore has received several improvements and performance
updates, including improved accounting for "omap" (key/value)
object data by pool, improved cache memory management, and a
reduced allocation unit size for SSD devices. (Note that by
default, the first time each OSD starts after upgrading to octopus
it will trigger a conversion that may take from a few minutes to a
few hours, depending on the amount of stored "omap" data.)
* Snapshot trimming metadata is now managed in a more efficient and
scalable fashion.
RBD block storage
~~~~~~~~~~~~~~~~~
* Mirroring now supports a new snapshot-based mode that no longer requires
the journaling feature and its related impacts in exchange for the loss
of point-in-time consistency (it remains crash consistent).
* Clone operations now preserve the sparseness of the underlying RBD image.
* The trash feature has been improved to (optionally) automatically
move old parent images to the trash when their children are all
deleted or flattened.
* The trash can be configured to automatically purge on a defined schedule.
* Images can be online re-sparsified to reduce the usage of zeroed extents.
* The `rbd-nbd` tool has been improved to use more modern kernel interfaces.
* Caching has been improved to be more efficient and performant.
* `rbd-mirror` automatically adjusts its per-image memory usage based
upon its memory target.
* A new persistent read-only caching daemon is available to offload reads from
shared parent images.
RGW object storage
~~~~~~~~~~~~~~~~~~
* New `Multisite Sync Policy` primitives for per-bucket replication. (EXPERIMENTAL)
* S3 feature support:
- Bucket Replication (EXPERIMENTAL)
- `Bucket Notifications`_ via HTTP/S, AMQP and Kafka
- Bucket Tagging
- Object Lock
- Public Access Block for buckets
* Bucket sharding:
- Significantly improved listing performance on buckets with many shards.
- Dynamic resharding prefers prime shard counts for improved distribution.
- Raised the default number of bucket shards to 11.
* Added `HashiCorp Vault Integration`_ for SSE-KMS.
* Added Keystone token cache for S3 requests.
CephFS distributed file system
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Inline data support in CephFS has been deprecated and will likely be
removed in a future release.
* MDS daemons can now be assigned to manage a particular file system via the
new `mds_join_fs` option.
* MDS now aggressively asks idle clients to trim caps which improves stability
when file system load changes.
* The mgr volumes plugin has received numerous improvements to support CephFS
via CSI, including snapshots and cloning.
* cephfs-shell has had numerous incremental improvements and bug fixes.
Upgrading from Mimic or Nautilus
--------------------------------
You can monitor the progress of your upgrade at each stage with the
`ceph versions` command, which will tell you what ceph version(s) are
running for each type of daemon.
Instructions
~~~~~~~~~~~~
#. Make sure your cluster is stable and healthy (no down or
recovering OSDs). (Optional, but recommended.)
#. Set the `noout` flag for the duration of the upgrade. (Optional,
but recommended.)::
# ceph osd set noout
#. Upgrade monitors by installing the new packages and restarting the
monitor daemons. For example, on each monitor host,::
# systemctl restart ceph-mon.target
Once all monitors are up, verify that the monitor upgrade is
complete by looking for the `octopus` string in the mon
map. The command::
# ceph mon dump | grep min_mon_release
should report::
min_mon_release 15 (nautilus)
If it doesn't, that implies that one or more monitors hasn't been
upgraded and restarted and/or the quorum does not include all monitors.
#. Upgrade `ceph-mgr` daemons by installing the new packages and
restarting all manager daemons. For example, on each manager host,::
# systemctl restart ceph-mgr.target
Verify the `ceph-mgr` daemons are running by checking `ceph
-s`::
# ceph -s
...
services:
mon: 3 daemons, quorum foo,bar,baz
mgr: foo(active), standbys: bar, baz
...
#. Upgrade all OSDs by installing the new packages and restarting the
ceph-osd daemons on all OSD hosts::
# systemctl restart ceph-osd.target
Note that the first time each OSD starts, it will do a format
conversion to improve the accounting for "omap" data. This may
take a few minutes to as much as a few hours (for an HDD with lots
of omap data). You can disable this automatic conversion with::
# ceph config set osd bluestore_fsck_quick_fix_on_mount false
You can monitor the progress of the OSD upgrades with the
`ceph versions` or `ceph osd versions` commands::
# ceph osd versions
{
"ceph version 13.2.5 (...) mimic (stable)": 12,
"ceph version 15.2.0 (...) octopus (stable)": 22,
}
#. Upgrade all CephFS MDS daemons. For each CephFS file system,
#. Reduce the number of ranks to 1. (Make note of the original
number of MDS daemons first if you plan to restore it later.)::
# ceph status
# ceph fs set <fs_name> max_mds 1
#. Wait for the cluster to deactivate any non-zero ranks by
periodically checking the status::
# ceph status
#. Take all standby MDS daemons offline on the appropriate hosts with::
# systemctl stop ceph-mds@<daemon_name>
#. Confirm that only one MDS is online and is rank 0 for your FS::
# ceph status
#. Upgrade the last remaining MDS daemon by installing the new
packages and restarting the daemon::
# systemctl restart ceph-mds.target
#. Restart all standby MDS daemons that were taken offline::
# systemctl start ceph-mds.target
#. Restore the original value of `max_mds` for the volume::
# ceph fs set <fs_name> max_mds <original_max_mds>
#. Upgrade all radosgw daemons by upgrading packages and restarting
daemons on all hosts::
# systemctl restart ceph-radosgw.target
#. Complete the upgrade by disallowing pre-Octopus OSDs and enabling
all new Octopus-only functionality::
# ceph osd require-osd-release octopus
#. If you set `noout` at the beginning, be sure to clear it with::
# ceph osd unset noout
#. Verify the cluster is healthy with `ceph health`.
If your CRUSH tunables are older than Hammer, Ceph will now issue a
health warning. If you see a health alert to that effect, you can
revert this change with::
ceph config set mon mon_crush_min_required_version firefly
If Ceph does not complain, however, then we recommend you also
switch any existing CRUSH buckets to straw2, which was added back
in the Hammer release. If you have any 'straw' buckets, this will
result in a modest amount of data movement, but generally nothing
too severe.::
ceph osd getcrushmap -o backup-crushmap
ceph osd crush set-all-straw-buckets-to-straw2
If there are problems, you can easily revert with::
ceph osd setcrushmap -i backup-crushmap
Moving to 'straw2' buckets will unlock a few recent features, like
the `crush-compat` :ref:`balancer <balancer>` mode added back in Luminous.
#. If you are upgrading from Mimic, or did not already do so when you
upgraded to Nautlius, we recommened you enable the new :ref:`v2
network protocol <msgr2>`, issue the following command::
ceph mon enable-msgr2
This will instruct all monitors that bind to the old default port
6789 for the legacy v1 protocol to also bind to the new 3300 v2
protocol port. To see if all monitors have been updated,::
ceph mon dump
and verify that each monitor has both a `v2:` and `v1:` address
listed.
#. Consider enabling the :ref:`telemetry module <telemetry>` to send
anonymized usage statistics and crash information to the Ceph
upstream developers. To see what would be reported (without actually
sending any information to anyone),::
ceph mgr module enable telemetry
ceph telemetry show
If you are comfortable with the data that is reported, you can opt-in to
automatically report the high-level cluster metadata with::
ceph telemetry on
For more information about the telemetry module, see :ref:`the
documentation <telemetry>`.
Upgrading from pre-Mimic releases (like Luminous)
-------------------------------------------------
You *must* first upgrade to Mimic (13.2.z) or Nautilus (14.2.z) before
upgrading to Octopus.
Upgrade compatibility notes
---------------------------
* Starting with Octopus, there is now a separate repository directory
for each version on `download.ceph.com` (e.g., `rpm-15.2.0` and
`debian-15.2.0`). The traditional package directory that is named
after the release (e.g., `rpm-octopus` and `debian-octopus`) is
now a symlink to the most recently bug fix version for that release.
We no longer generate a single repository that combines all bug fix
versions for a single named release.
* The RGW "num_rados_handles" has been removed.
If you were using a value of "num_rados_handles" greater than 1
multiply your current "objecter_inflight_ops" and
"objecter_inflight_op_bytes" paramaeters by the old
"num_rados_handles" to get the same throttle behavior.
* Ceph now packages python bindings for python3.6 instead of
python3.4, because python3 in EL7/EL8 is now using python3.6
as the native python3. see the `announcement`_
for more details on the background of this change.
* librbd now uses a write-around cache policy be default,
replacing the previous write-back cache policy default.
This cache policy allows librbd to immediately complete
write IOs while they are still in-flight to the OSDs.
Subsequent flush requests will ensure all in-flight
write IOs are completed prior to completing. The
librbd cache policy can be controlled via a new
"rbd_cache_policy" configuration option.
* librbd now includes a simple IO scheduler which attempts to
batch together multiple IOs against the same backing RBD
data block object. The librbd IO scheduler policy can be
controlled via a new "rbd_io_scheduler" configuration
option.
* RGW: radosgw-admin introduces two subcommands that allow the
managing of expire-stale objects that might be left behind after a
bucket reshard in earlier versions of RGW. One subcommand lists such
objects and the other deletes them. Read the troubleshooting section
of the dynamic resharding docs for details.
* RGW: Bucket naming restrictions have changed and likely to cause
InvalidBucketName errors. We recommend to set `rgw_relaxed_s3_bucket_names`
option to true as a workaround.
* In the Zabbix Mgr Module there was a typo in the key being send
to Zabbix for PGs in backfill_wait state. The key that was sent
was 'wait_backfill' and the correct name is 'backfill_wait'.
Update your Zabbix template accordingly so that it accepts the
new key being send to Zabbix.
* zabbix plugin for ceph manager now includes osd and pool
discovery. Update of zabbix_template.xml is needed
to receive per-pool (read/write throughput, diskspace usage)
and per-osd (latency, status, pgs) statistics
* The format of all date + time stamps has been modified to fully
conform to ISO 8601. The old format (`YYYY-MM-DD
HH:MM:SS.ssssss`) excluded the `T` separator between the date and
time and was rendered using the local time zone without any explicit
indication. The new format includes the separator as well as a
`+nnnn` or `-nnnn` suffix to indicate the time zone, or a `Z`
suffix if the time is UTC. For example,
`2019-04-26T18:40:06.225953+0100`.
Any code or scripts that was previously parsing date and/or time
values from the JSON or XML structure CLI output should be checked
to ensure it can handle ISO 8601 conformant values. Any code
parsing date or time values from the unstructured human-readable
output should be modified to parse the structured output instead, as
the human-readable output may change without notice.
* The `bluestore_no_per_pool_stats_tolerance` config option has been
replaced with `bluestore_fsck_error_on_no_per_pool_stats`
(default: false). The overall default behavior has not changed:
fsck will warn but not fail on legacy stores, and repair will
convert to per-pool stats.
* The disaster-recovery related 'ceph mon sync force' command has been
replaced with 'ceph daemon <...> sync_force'.
* The `osd_recovery_max_active` option now has
`osd_recovery_max_active_hdd` and `osd_recovery_max_active_ssd`
variants, each with different default values for HDD and SSD-backed
OSDs, respectively. By default `osd_recovery_max_active` now
defaults to zero, which means that the OSD will conditionally use
the HDD or SSD option values. Administrators who have customized
this value may want to consider whether they have set this to a
value similar to the new defaults (3 for HDDs and 10 for SSDs) and,
if so, remove the option from their configuration entirely.
* monitors now have a `ceph osd info` command that will provide information
on all osds, or provided osds, thus simplifying the process of having to
parse `osd dump` for the same information.
* The structured output of `ceph status` or `ceph -s` is now more
concise, particularly the `mgrmap` and `monmap` sections, and the
structure of the `osdmap` section has been cleaned up.
* A health warning is now generated if the average osd heartbeat ping
time exceeds a configurable threshold for any of the intervals
computed. The OSD computes 1 minute, 5 minute and 15 minute
intervals with average, minimum and maximum values. New
configuration option `mon_warn_on_slow_ping_ratio` specifies a
percentage of `osd_heartbeat_grace` to determine the threshold. A
value of zero disables the warning. New configuration option
`mon_warn_on_slow_ping_time` specified in milliseconds over-rides
the computed value, causes a warning when OSD heartbeat pings take
longer than the specified amount. New admin command `ceph daemon
mgr.# dump_osd_network [threshold]` command will list all
connections with a ping time longer than the specified threshold or
value determined by the config options, for the average for any of
the 3 intervals. New admin command `ceph daemon osd.#
dump_osd_network [threshold]` will do the same but only including
heartbeats initiated by the specified OSD.
* Inline data support for CephFS has been deprecated. When setting the flag,
users will see a warning to that effect, and enabling it now requires the
`--yes-i-really-really-mean-it` flag. If the MDS is started on a
filesystem that has it enabled, a health warning is generated. Support for
this feature will be removed in a future release.
* `ceph {set,unset} full` is not supported anymore. We have been using
`full` and `nearfull` flags in OSD map for tracking the fullness status
of a cluster back since the Hammer release, if the OSD map is marked `full`
all write operations will be blocked until this flag is removed. In the
Infernalis release and Linux kernel 4.7 client, we introduced the per-pool
full/nearfull flags to track the status for a finer-grained control, so the
clients will hold the write operations if either the cluster-wide `full`
flag or the per-pool `full` flag is set. This was a compromise, as we
needed to support the cluster with and without per-pool `full` flags
support. But this practically defeated the purpose of introducing the
per-pool flags. So, in the Mimic release, the new flags finally took the
place of their cluster-wide counterparts, as the monitor started removing
these two flags from OSD map. So the clients of Infernalis and up can benefit
from this change, as they won't be blocked by the full pools which they are
not writing to. In this release, `ceph {set,unset} full` is now considered
as an invalid command. And the clients will continue honoring both the
cluster-wide and per-pool flags to be backward comaptible with pre-infernalis
clusters.
* The telemetry module now reports more information.
First, there is a new 'device' channel, enabled by default, that
will report anonymized hard disk and SSD health metrics to
telemetry.ceph.com in order to build and improve device failure
prediction algorithms. If you are not comfortable sharing device
metrics, you can disable that channel first before re-opting-in::
ceph config set mgr mgr/telemetry/channel_device false
Second, we now report more information about CephFS file systems,
including:
- how many MDS daemons (in total and per file system)
- which features are (or have been) enabled
- how many data pools
- approximate file system age (year + month of creation)
- how many files, bytes, and snapshots
- how much metadata is being cached
We have also added:
- which Ceph release the monitors are running
- whether msgr v1 or v2 addresses are used for the monitors
- whether IPv4 or IPv6 addresses are used for the monitors
- whether RADOS cache tiering is enabled (and which mode)
- whether pools are replicated or erasure coded, and
which erasure code profile plugin and parameters are in use
- how many hosts are in the cluster, and how many hosts have each type of daemon
- whether a separate OSD cluster network is being used
- how many RBD pools and images are in the cluster, and how many pools have RBD mirroring enabled
- how many RGW daemons, zones, and zonegroups are present; which RGW frontends are in use
- aggregate stats about the CRUSH map, like which algorithms are used, how
big buckets are, how many rules are defined, and what tunables are in
use
If you had telemetry enabled, you will need to re-opt-in with::
ceph telemetry on
You can view exactly what information will be reported first with::
$ ceph telemetry show # see everything
$ ceph telemetry show basic # basic cluster info (including all of the new info)
* Following invalid settings now are not tolerated anymore
for the command `ceph osd erasure-code-profile set xxx`.
* invalid `m` for "reed_sol_r6_op" erasure technique
* invalid `m` and invalid `w` for "liber8tion" erasure technique
* New OSD daemon command dump_recovery_reservations which reveals the
recovery locks held (in_progress) and waiting in priority queues.
* New OSD daemon command dump_scrub_reservations which reveals the
scrub reservations that are held for local (primary) and remote (replica) PGs.
* Previously, `ceph tell mgr ...` could be used to call commands
implemented by mgr modules. This is no longer supported. Since
luminous, using `tell` has not been necessary: those same commands
are also accessible without the `tell mgr` portion (e.g., `ceph
tell mgr influx foo` is the same as `ceph influx foo`. `ceph
tell mgr ...` will now call admin commands--the same set of
commands accessible via `ceph daemon ...` when you are logged into
the appropriate host.
* The `ceph tell` and `ceph daemon` commands have been unified,
such that all such commands are accessible via either interface.
Note that ceph-mgr tell commands are accessible via either `ceph
tell mgr ...` or `ceph tell mgr.<id> ...`, and it is only
possible to send tell commands to the active daemon (the standbys do
not accept incoming connections over the network).
* Ceph will now issue a health warning if a RADOS pool as a `pg_num`
value that is not a power of two. This can be fixed by adjusting
the pool to a nearby power of two::
ceph osd pool set <pool-name> pg_num <new-pg-num>
Alternatively, the warning can be silenced with::
ceph config set global mon_warn_on_pool_pg_num_not_power_of_two false
* The format of MDSs in `ceph fs dump` has changed.
* The `mds_cache_size` config option is completely removed. Since luminous,
the `mds_cache_memory_limit` config option has been preferred to configure
the MDS's cache limits.
* The `pg_autoscale_mode` is now set to `on` by default for newly
created pools, which means that Ceph will automatically manage the
number of PGs. To change this behavior, or to learn more about PG
autoscaling, see :ref:`pg-autoscaler`. Note that existing pools in
upgraded clusters will still be set to `warn` by default.
* The `upmap_max_iterations` config option of mgr/balancer has been
renamed to `upmap_max_optimizations` to better match its behaviour.
* `mClockClientQueue` and `mClockClassQueue` OpQueue
implementations have been removed in favor of of a single
`mClockScheduler` implementation of a simpler OSD interface.
Accordingly, the `osd_op_queue_mclock*` family of config options
has been removed in favor of the `osd_mclock_scheduler*` family
of options.
* The config subsystem now searches dot ('.') delimited prefixes for
options. That means for an entity like `client.foo.bar`, its
overall configuration will be a combination of the global options,
`client`, `client.foo`, and `client.foo.bar`. Previously,
only global, `client`, and `client.foo.bar` options would apply.
This change may affect the configuration for clients that include a
`.` in their name.
Getting Ceph
------------
* Git at git://github.com/ceph/ceph.git
* Tarball at http://download.ceph.com/tarballs/ceph-15.2.0.tar.gz
* For packages, see http://docs.ceph.com/docs/master/install/get-packages/
* Release git sha1: dc6a0b5c3cbf6a5e1d6d4f20b5ad466d76b96247
--
Abhishek Lekshmanan
SUSE Software Solutions Germany GmbH
GF: Felix Imendörffer
I already have the time logged, I do not need it a second time.
Mar 31 13:39:59 c01 ceph-mgr: 2020-03-31 13:39:59.518 7f554edc8700 0
log_channel(cluster) log [DBG] : pgmap v672065: 384 pgs: 384
active+clean;
I already have the time logged, I do not need it a second time.
Mar 31 13:39:59 c01 ceph-mgr: 2020-03-31 13:39:59.518 7f554edc8700 0
log_channel(cluster) log [DBG] : pgmap v672065: 384 pgs: 384
active+clean;
I already have the time logged, I do not need it a second time.
Mar 31 13:39:59 c01 ceph-mgr: 2020-03-31 13:39:59.518 7f554edc8700 0
log_channel(cluster) log [DBG] : pgmap v672065: 384 pgs: 384
active+clean;
I already have the time logged, I do not need it a second time.
Mar 31 13:39:59 c01 ceph-mgr: 2020-03-31 13:39:59.518 7f554edc8700 0
log_channel(cluster) log [DBG] : pgmap v672065: 384 pgs: 384
active+clean;
Hi,
I am currently building a 10 node Ceph cluster, each OSD node has 2x 25 Gbit/s nics, and I have 2 TOR switches (mlag not supported).
enp179s0f0 -> sw1
enp179s0f1 -> sw2
vlan 323 is used for ‘public network’
vlan 324 is used for ‘cluster network’
My desired configuration is to create two bond interfaces in active-backup mode:
bond0
- enp179s0f0.323 (active)
- enp179s0f1.323 (backup)
bond1
- enp179s0f0.324 (backup)
- enp179s0f1.324 (active)
This way, the public network will use switch1, and the cluster network will use switch2, under normal operation.
I am, however, having an issue implementing this configuration in Ubuntu 18.04 with netplan (see configuration at the end of this post).
When I reboot a node with the below netplan configuration, the bond interface is created, but the vlan interfaces are not added to the bond.
I see the following errors in the log:
systemd-networkd[1641]: enp179s0f0.323: Enslaving by 'bond0’
systemd-networkd[1641]: bond0: Enslaving link 'enp179s0f0.323’
systemd-networkd[1641]: enp179s0f1.323: Enslaving by 'bond0’
systemd-networkd[1641]: bond0: Enslaving link 'enp179s0f1.323’
systemd-networkd[1643]: enp179s0f1.323: Could not join netdev: Operation not permitted
systemd-networkd[1643]: enp179s0f1.323: Failed
systemd-networkd[1643]: enp179s0f0.323: Could not join netdev: Operation not permitted
systemd-networkd[1643]: enp179s0f0.323: Failed
If I manually run ’systemctl restart systemd-networkd’ after boot has completed, then the bond is successfully created with the vlan interfaces.
Does anybody have a similar configuration working specifically with netplan/networkd? Could you please share your configuration?
Netplan config that doesn’t work at boot time:
network:
version: 2
renderer: networkd
ethernets:
enp179s0f0: {}
enp179s0f1: {}
bonds:
bond0:
dhcp4: false
dhcp6: false
interfaces:
- enp179s0f0.323
- enp179s0f1.323
parameters:
mode: active-backup
primary: enp179s0f0.323
mii-monitor-interval: 1
addresses: [insert address here]
bond1:
dhcp4: false
dhcp6: false
interfaces:
- enp179s0f0.324
- enp179s0f1.324
parameters:
mode: active-backup
primary: enp179s0f1.324
mii-monitor-interval: 1
addresses: [insert address here]
vlans:
enp179s0f0.323:
id: 323
link: enp179s0f0
enp179s0f1.323:
id: 323
link: enp179s0f1
enp179s0f0.324:
id: 324
link: enp179s0f0
enp179s0f1.324:
id: 324
link: enp179s0f1
Hi everyone,
I'm working on replacing OSDs node with the newer one. The new host has the new hostname and new disk (faster one but the same size with old disk). My plan is
- Reweight the OSD to zero to spread all existed data to the rest nodes to keep data availability
- set flag noout, norebalance, norecover, nobackfill, destroy the OSD and join the new OSD as the same ID of the old one.
By above approach, the cluster will remap PGs of all nodes. Each data will be moved twice times until it reach the new OSD (reweight and join new node as same ID)
I also did the other way that only set flags and destroy OSD. But the result is still the same (degraded objects from destroyed osd and misplaced object after joining new osd)
Are there any ways to replace the OSD node directly without remapping PGs of the whole cluster?
Many thanks!
Nghia.
Hi all,
Using sendfile function to write data to cephfs, the data doesn't end up being written.
From the client that writes the file, it looks correct at first, but from all other ceph clients, the size is 0 bytes. Re-mounting the filesystem, the data is lost.
I didn't see any errors, the data just doesn't get written, as if it's just cached in cephfs client.
Writing just an extra byte at the end of the file (without sendfile), it seems to trigger the actual write of all the data.
Could someone else confirm if they are also seeing such issue? I'm on ceph 13.2.8, using kernel module for mounting on CentOS7.
I've used this sendfile-example for the example below:
https://github.com/pijewski/sendfile-example/blob/master/sendfile.c
Using a small 27 byte source file.
# ls -lh examples/
-rw-r--r-- 1 root c3-staff 27 Mar 24 18:04 src
# ./sendfile examples/src examples/dst 27
# ls -lh examples/
------x--- 1 root c3-staff 27 Mar 24 18:12 dst
-rw-r--r-- 1 root c3-staff 27 Mar 24 18:04 src
But, directory is still on 27 bytes:
# ls -lhd examples
drwxr-sr-x 1 root c3-staff 27 Mar 24 18:15 examples
and on all other cephfs clients, the file is empty:
# ls -lh examples/
------x--- 1 root c3-staff 0 Mar 24 18:12 dst
-rw-r--r-- 1 root c3-staff 27 Mar 24 18:04 src
Is this a bug in cephfs, or should I not expect sendfile to work (as it is not posix compliant). There are no error reported from what i can see, and it is 100% reproducible
Best regards, Mikael
