We're glad to announce the first release of Nautilus v14.2.0 stable
series. There have been a lot of changes across components from the
previous Ceph releases, and we advise everyone to go through the release
and upgrade notes carefully.
The release also saw commits from over 300 contributors and we'd like to
thank everyone from the community for making this release happen. The
next major release of Ceph will be called Octopus. Consider joining
us in the second edition of Cephalocon, at Barcelona this year
https://ceph.com/cephalocon/barcelona-2019/
For a detailed changelog please refer to the official blog entry at
http://ceph.com/releases/v14-2-0-nautilus-released/
Major Changes from Mimic
------------------------
- *Dashboard*:
The Ceph Dashboard has gained a lot of new functionality:
* Support for multiple users / roles
* SSO (SAMLv2) for user authentication
* Auditing support
* New landing page, showing more metrics and health info
* I18N support
* REST API documentation with Swagger API
New Ceph management features include:
* OSD management (mark as down/out, change OSD settings, recovery profiles)
* Cluster config settings editor
* Ceph Pool management (create/modify/delete)
* ECP management
* RBD mirroring configuration
* Embedded Grafana Dashboards (derived from Ceph Metrics)
* CRUSH map viewer
* NFS Ganesha management
* iSCSI target management (via ceph-iscsi)
* RBD QoS configuration
* Ceph Manager (ceph-mgr) module management
* Prometheus alert Management
Also, the Ceph Dashboard is now split into its own package named
``ceph-mgr-dashboard``. You might want to install it separately,
if your package management software fails to do so when it installs
``ceph-mgr``.
- *RADOS*:
* The number of placement groups (PGs) per pool can now be decreased
at any time, and the cluster can `automatically tune the PG count <pg-autoscaler>`_
based on cluster utilization or administrator hints.
* The new :ref:`v2 wire protocol <msgr2>` brings support for encryption on the wire.
* Physical `storage devices <devices>`_ consumed by OSD and Monitor daemons are
now tracked by the cluster along with health metrics (i.e.,
SMART), and the cluster can apply a pre-trained prediction model
or a cloud-based prediction service to `warn about expected
HDD or SSD failures <diskprediction>`_.
* The NUMA node for OSD daemons can easily be monitored via the
``ceph osd numa-status`` command, and configured via the
``osd_numa_node`` config option.
* When BlueStore OSDs are used, space utilization is now broken down
by object data, omap data, and internal metadata, by pool, and by
pre- and post- compression sizes.
* OSDs more effectively prioritize the most important PGs and
objects when performing recovery and backfill.
* Progress for long-running background processes--like recovery
after a device failure--is now reported as part of ``ceph
status``.
* An experimental `Coupled-Layer "Clay" erasure code
<https://www.usenix.org/conference/fast18/presentation/vajha>`_
plugin has been added that reduces network bandwidth and IO needed
for most recovery operations.
- *RGW*:
* S3 lifecycle transition for tiering between storage classes.
* A new web frontend (Beast) has replaced civetweb as the default,
improving overall performance.
* A new publish/subscribe infrastructure allows RGW to feed events
to serverless frameworks like knative or data pipelies like Kafka.
* A range of authentication features, including STS federation using
OAuth2 and OpenID::connect and an OPA (Open Policy Agent)
authentication delegation prototype.
* The new archive zone federation feature enables full preservation
of all objects (including history) in a separate zone.
- *CephFS*:
* MDS stability has been greatly improved for large caches and
long-running clients with a lot of RAM. Cache trimming and client
capability recall is now throttled to prevent overloading the MDS.
* CephFS may now be exported via NFS-Ganesha clusters in environments managed
by Rook. Ceph manages the clusters and ensures high-availability and
scalability. An `introductory demo
<https://ceph.com/community/deploying-a-cephnfs-server-cluster-with-rook/>`_
is available. More automation of this feature is expected to be forthcoming
in future minor releases of Nautilus.
* The MDS ``mds_standby_for_*``, ``mon_force_standby_active``, and
``mds_standby_replay`` configuration options have been obsoleted. Instead,
the operator :ref:`may now set <mds-standby-replay>` the new
``allow_standby_replay`` flag on the CephFS file system. This setting
causes standbys to become standby-replay for any available rank in the file
system.
* MDS now supports dropping its cache which concurrently asks clients
to trim their caches. This is done using MDS admin socket ``cache drop``
command.
* It is now possible to check the progress of an on-going scrub in the MDS.
Additionally, a scrub may be paused or aborted. See :ref:`the scrub
documentation <mds-scrub>` for more information.
* A new interface for creating volumes is provided via the ``ceph volume``
command-line-interface.
* A new cephfs-shell tool is available for manipulating a CephFS file
system without mounting.
* CephFS-related output from ``ceph status`` has been reformatted for brevity,
clarity, and usefulness.
* Lazy IO has been revamped. It can be turned on by the client using the new
CEPH_O_LAZY flag to the ``ceph_open`` C/C++ API or via the config option
``client_force_lazyio``.
* CephFS file system can now be brought down rapidly via the ``ceph fs fail``
command. See :ref:`the administration page <cephfs-administration>` for
more information.
- *RBD*:
* Images can be live-migrated with minimal downtime to assist with moving
images between pools or to new layouts.
* New ``rbd perf image iotop`` and ``rbd perf image iostat`` commands provide
an iotop- and iostat-like IO monitor for all RBD images.
* The *ceph-mgr* Prometheus exporter now optionally includes an IO monitor
for all RBD images.
* Support for separate image namespaces within a pool for tenant isolation.
- *Misc*:
* Ceph has a new set of :ref:`orchestrator modules
<orchestrator-cli-module>` to directly interact with external
orchestrators like ceph-ansible, DeepSea, Rook, or simply ssh via
a consistent CLI (and, eventually, Dashboard) interface.
Upgrading from Mimic or Luminous
--------------------------------
Notes
~~~~~
* During the upgrade from Luminous to Nautilus, it will not be
possible to create a new OSD using a Luminous ceph-osd daemon after
the monitors have been upgraded to Nautilus. We recommend you avoid adding
or replacing any OSDs while the upgrade is in progress.
* We recommend you avoid creating any RADOS pools while the upgrade is
in progress.
* You can monitor the progress of your upgrade at each stage with the
``ceph versions`` command, which will tell you what ceph version(s) are
running for each type of daemon.
Instructions
~~~~~~~~~~~~
#. If your cluster was originally installed with a version prior to
Luminous, ensure that it has completed at least one full scrub of
all PGs while running Luminous. Failure to do so will cause your
monitor daemons to refuse to join the quorum on start, leaving them
non-functional.
If you are unsure whether or not your Luminous cluster has
completed a full scrub of all PGs, you can check your cluster's
state by running::
# ceph osd dump | grep ^flags
In order to be able to proceed to Nautilus, your OSD map must include
the ``recovery_deletes`` and ``purged_snapdirs`` flags.
If your OSD map does not contain both these flags, you can simply
wait for approximately 24-48 hours, which in a standard cluster
configuration should be ample time for all your placement groups to
be scrubbed at least once, and then repeat the above process to
recheck.
However, if you have just completed an upgrade to Luminous and want
to proceed to Mimic in short order, you can force a scrub on all
placement groups with a one-line shell command, like::
# ceph pg dump pgs_brief | cut -d " " -f 1 | xargs -n1 ceph pg scrub
You should take into consideration that this forced scrub may
possibly have a negative impact on your Ceph clients' performance.
#. Make sure your cluster is stable and healthy (no down or
recovering OSDs). (Optional, but recommended.)
#. Set the ``noout`` flag for the duration of the upgrade. (Optional,
but recommended.)::
# ceph osd set noout
#. Upgrade monitors by installing the new packages and restarting the
monitor daemons. For example, on each monitor host,::
# systemctl restart ceph-mon.target
Once all monitors are up, verify that the monitor upgrade is
complete by looking for the ``nautilus`` string in the mon
map. The command::
# ceph mon dump | grep min_mon_release
should report::
min_mon_release 14 (nautilus)
If it doesn't, that implies that one or more monitors hasn't been
upgraded and restarted and/or the quorum does not include all monitors.
#. Upgrade ``ceph-mgr`` daemons by installing the new packages and
restarting all manager daemons. For example, on each manager host,::
# systemctl restart ceph-mgr.target
Please note, if you are using Ceph Dashboard, you will probably need to
install ``ceph-mgr-dashboard`` separately after upgrading ``ceph-mgr``
package. The install script of ``ceph-mgr-dashboard`` will restart the
manager daemons automatically for you. So in this case, you can just skip
the step to restart the daemons.
Verify the ``ceph-mgr`` daemons are running by checking ``ceph
-s``::
# ceph -s
...
services:
mon: 3 daemons, quorum foo,bar,baz
mgr: foo(active), standbys: bar, baz
...
#. Upgrade all OSDs by installing the new packages and restarting the
ceph-osd daemons on all OSD hosts::
# systemctl restart ceph-osd.target
You can monitor the progress of the OSD upgrades with the
``ceph versions`` or ``ceph osd versions`` commands::
# ceph osd versions
{
"ceph version 13.2.5 (...) mimic (stable)": 12,
"ceph version 14.2.0 (...) nautilus (stable)": 22,
}
#. If there are any OSDs in the cluster deployed with ceph-disk (e.g.,
almost any OSDs that were created before the Mimic release), you
need to tell ceph-volume to adopt responsibility for starting the
daemons. On each host containing OSDs, ensure the OSDs are
currently running, and then::
# ceph-volume simple scan
# ceph-volume simple activate --all
We recommend that each OSD host be rebooted following this step to
verify that the OSDs start up automatically.
Note that ceph-volume doesn't have the same hot-plug capability
that ceph-disk did, where a newly attached disk is automatically
detected via udev events. If the OSD isn't currently running when the
above ``scan`` command is run, or a ceph-disk-based OSD is moved to
a new host, or the host OSD is reinstalled, or the
``/etc/ceph/osd`` directory is lost, you will need to scan the main
data partition for each ceph-disk OSD explicitly. For example,::
# ceph-volume simple scan /dev/sdb1
The output will include the appopriate ``ceph-volume simple
activate`` command to enable the OSD.
#. Upgrade all CephFS MDS daemons. For each CephFS file system,
#. Reduce the number of ranks to 1. (Make note of the original
number of MDS daemons first if you plan to restore it later.)::
# ceph status
# ceph fs set <fs_name> max_mds 1
#. Wait for the cluster to deactivate any non-zero ranks by
periodically checking the status::
# ceph status
#. Take all standby MDS daemons offline on the appropriate hosts with::
# systemctl stop ceph-mds@<daemon_name>
#. Confirm that only one MDS is online and is rank 0 for your FS::
# ceph status
#. Upgrade the last remaining MDS daemon by installing the new
packages and restarting the daemon::
# systemctl restart ceph-mds.target
#. Restart all standby MDS daemons that were taken offline::
# systemctl start ceph-mds.target
#. Restore the original value of ``max_mds`` for the volume::
# ceph fs set <fs_name> max_mds <original_max_mds>
#. Upgrade all radosgw daemons by upgrading packages and restarting
daemons on all hosts::
# systemctl restart radosgw.target
#. Complete the upgrade by disallowing pre-Nautilus OSDs and enabling
all new Nautilus-only functionality::
# ceph osd require-osd-release nautilus
#. If you set ``noout`` at the beginning, be sure to clear it with::
# ceph osd unset noout
#. Verify the cluster is healthy with ``ceph health``.
#. To enable the new :ref:`v2 network protocol <msgr2>`, issue the
following command::
ceph mon enable-msgr2
This will instruct all monitors that bind to the old default port
6789 for the legacy v1 protocol to also bind to the new 3300 v2
protocol port. To see if all monitors have been updated,::
ceph mon dump
and verify that each monitor has both a ``v2:`` and ``v1:`` address
listed.
#. For each host that has been upgraded, you should update your
``ceph.conf`` file so that it either specifies no monitor port (if
you are running the monitors on the default ports) or references
both the v2 and v1 addresses and ports explicitly. Things will
still work if only the v1 IP and port are listed, but each CLI
instantiation or daemon will need to reconnect after learning the
monitors also speak the v2 protocol, slowing things down a bit and
preventing a full transition to the v2 protocol.
This is also a good time to fully transition any config options in
``ceph.conf`` into the cluster's configuration database. On each host,
you can use the following command to import any options into the
monitors with::
ceph config assimilate-conf -i /etc/ceph/ceph.conf
You can see the cluster's configuration database with::
ceph config dump
To create a minimal but sufficient ``ceph.conf`` for each host,::
ceph config generate-minimal-conf > /etc/ceph/ceph.conf
Be sure to use this new config only on hosts that have been
upgraded to Nautilus, as it may contain a ``mon_host`` value that
includes the new ``v2:`` and ``v1:`` prefixes for IP addresses that
is only understood by Nautilus.
For more information, see :ref:`msgr2_ceph_conf`.
#. Consider enabling the :ref:`telemetry module <telemetry>` to send
anonymized usage statistics and crash information to the Ceph
upstream developers. To see what would be reported (without actually
sending any information to anyone),::
ceph mgr module enable telemetry
ceph telemetry show
If you are comfortable with the data that is reported, you can opt-in to
automatically report the high-level cluster metadata with::
ceph telemetry on
For more information about the telemetry module, see `the
documentation <telemetry>`_.
Upgrading from pre-Luminous releases (like Jewel)
-------------------------------------------------
You *must* first upgrade to Luminous (12.2.z) before attempting an
upgrade to Nautilus. In addition, your cluster must have completed at
least one scrub of all PGs while running Luminous, setting the
``recovery_deletes`` and ``purged_snapdirs`` flags in the OSD map.
Upgrade compatibility notes
---------------------------
These changes occurred between the Mimic and Nautilus releases.
* ``ceph pg stat`` output has been modified in json
format to match ``ceph df`` output:
- "raw_bytes" field renamed to "total_bytes"
- "raw_bytes_avail" field renamed to "total_bytes_avail"
- "raw_bytes_avail" field renamed to "total_bytes_avail"
- "raw_bytes_used" field renamed to "total_bytes_raw_used"
- "total_bytes_used" field added to represent the space (accumulated over
all OSDs) allocated purely for data objects kept at block(slow) device
* ``ceph df [detail]`` output (GLOBAL section) has been modified in plain
format:
- new 'USED' column shows the space (accumulated over all OSDs) allocated
purely for data objects kept at block(slow) device.
- 'RAW USED' is now a sum of 'USED' space and space allocated/reserved at
block device for Ceph purposes, e.g. BlueFS part for BlueStore.
* ``ceph df [detail]`` output (GLOBAL section) has been modified in json
format:
- 'total_used_bytes' column now shows the space (accumulated over all OSDs)
allocated purely for data objects kept at block(slow) device
- new 'total_used_raw_bytes' column shows a sum of 'USED' space and space
allocated/reserved at block device for Ceph purposes, e.g. BlueFS part for
BlueStore.
* ``ceph df [detail]`` output (POOLS section) has been modified in plain
format:
- 'BYTES USED' column renamed to 'STORED'. Represents amount of data
stored by the user.
- 'USED' column now represent amount of space allocated purely for data
by all OSD nodes in KB.
- 'QUOTA BYTES', 'QUOTA OBJECTS' aren't showed anymore in non-detailed mode.
- new column 'USED COMPR' - amount of space allocated for compressed
data. i.e., compressed data plus all the allocation, replication and erasure
coding overhead.
- new column 'UNDER COMPR' - amount of data passed through compression
(summed over all replicas) and beneficial enough to be stored in a
compressed form.
- Some columns reordering
* ``ceph df [detail]`` output (POOLS section) has been modified in json
format:
- 'bytes used' column renamed to 'stored'. Represents amount of data
stored by the user.
- 'raw bytes used' column renamed to "stored_raw". Totals of user data
over all OSD excluding degraded.
- new 'bytes_used' column now represent amount of space allocated by
all OSD nodes.
- 'kb_used' column - the same as 'bytes_used' but in KB.
- new column 'compress_bytes_used' - amount of space allocated for compressed
data. i.e., compressed data plus all the allocation, replication and erasure
coding overhead.
- new column 'compress_under_bytes' amount of data passed through compression
(summed over all replicas) and beneficial enough to be stored in a
compressed form.
* ``rados df [detail]`` output (POOLS section) has been modified in plain
format:
- 'USED' column now shows the space (accumulated over all OSDs) allocated
purely for data objects kept at block(slow) device.
- new column 'USED COMPR' - amount of space allocated for compressed
data. i.e., compressed data plus all the allocation, replication and erasure
coding overhead.
- new column 'UNDER COMPR' - amount of data passed through compression
(summed over all replicas) and beneficial enough to be stored in a
compressed form.
* ``rados df [detail]`` output (POOLS section) has been modified in json
format:
- 'size_bytes' and 'size_kb' columns now show the space (accumulated
over all OSDs) allocated purely for data objects kept at block
device.
- new column 'compress_bytes_used' - amount of space allocated for compressed
data. i.e., compressed data plus all the allocation, replication and erasure
coding overhead.
- new column 'compress_under_bytes' amount of data passed through compression
(summed over all replicas) and beneficial enough to be stored in a
compressed form.
* ``ceph pg dump`` output (totals section) has been modified in json
format:
- new 'USED' column shows the space (accumulated over all OSDs) allocated
purely for data objects kept at block(slow) device.
- 'USED_RAW' is now a sum of 'USED' space and space allocated/reserved at
block device for Ceph purposes, e.g. BlueFS part for BlueStore.
* The ``ceph osd rm`` command has been deprecated. Users should use
``ceph osd destroy`` or ``ceph osd purge`` (but after first confirming it is
safe to do so via the ``ceph osd safe-to-destroy`` command).
* The MDS now supports dropping its cache for the purposes of benchmarking.::
ceph tell mds.* cache drop <timeout>
Note that the MDS cache is cooperatively managed by the clients. It is
necessary for clients to give up capabilities in order for the MDS to fully
drop its cache. This is accomplished by asking all clients to trim as many
caps as possible. The timeout argument to the ``cache drop`` command controls
how long the MDS waits for clients to complete trimming caps. This is optional
and is 0 by default (no timeout). Keep in mind that clients may still retain
caps to open files which will prevent the metadata for those files from being
dropped by both the client and the MDS. (This is an equivalent scenario to
dropping the Linux page/buffer/inode/dentry caches with some processes pinning
some inodes/dentries/pages in cache.)
* The ``mon_health_preluminous_compat`` and
``mon_health_preluminous_compat_warning`` config options are
removed, as the related functionality is more than two versions old.
Any legacy monitoring system expecting Jewel-style health output
will need to be updated to work with Nautilus.
* Nautilus is not supported on any distros still running upstart so upstart
specific files and references have been removed.
* The ``ceph pg <pgid> list_missing`` command has been renamed to
``ceph pg <pgid> list_unfound`` to better match its behaviour.
* The *rbd-mirror* daemon can now retrieve remote peer cluster configuration
secrets from the monitor. To use this feature, the rbd-mirror daemon
CephX user for the local cluster must use the ``profile rbd-mirror`` mon cap.
The secrets can be set using the ``rbd mirror pool peer add`` and
``rbd mirror pool peer set`` actions.
* The 'rbd-mirror' daemon will now run in active/active mode by default, where
mirrored images are evenly distributed between all active 'rbd-mirror'
daemons. To revert to active/passive mode, override the
'rbd_mirror_image_policy_type' config key to 'none'.
* The ``ceph mds deactivate`` is fully obsolete and references to it in the docs
have been removed or clarified.
* The libcephfs bindings added the ``ceph_select_filesystem`` function
for use with multiple filesystems.
* The cephfs python bindings now include ``mount_root`` and ``filesystem_name``
options in the mount() function.
* erasure-code: add experimental *Coupled LAYer (CLAY)* erasure codes
support. It features less network traffic and disk I/O when performing
recovery.
* The ``cache drop`` OSD command has been added to drop an OSD's caches:
- ``ceph tell osd.x cache drop``
* The ``cache status`` OSD command has been added to get the cache stats of an
OSD:
- ``ceph tell osd.x cache status``
* The libcephfs added several functions that allow restarted client to destroy
or reclaim state held by a previous incarnation. These functions are for NFS
servers.
* The ``ceph`` command line tool now accepts keyword arguments in
the format ``--arg=value`` or ``--arg value``.
* ``librados::IoCtx::nobjects_begin()`` and
``librados::NObjectIterator`` now communicate errors by throwing a
``std::system_error`` exception instead of ``std::runtime_error``.
* The callback function passed to ``LibRGWFS.readdir()`` now accepts a ``flags``
parameter. it will be the last parameter passed to ``readdir()`` method.
* The ``cephfs-data-scan scan_links`` now automatically repair inotables and
snaptable.
* Configuration values ``mon_warn_not_scrubbed`` and
``mon_warn_not_deep_scrubbed`` have been renamed. They are now
``mon_warn_pg_not_scrubbed_ratio`` and ``mon_warn_pg_not_deep_scrubbed_ratio``
respectively. This is to clarify that these warnings are related to
pg scrubbing and are a ratio of the related interval. These options
are now enabled by default.
* The MDS cache trimming is now throttled. Dropping the MDS cache
via the ``ceph tell mds.<foo> cache drop`` command or large reductions in the
cache size will no longer cause service unavailability.
* The CephFS MDS behavior with recalling caps has been significantly improved
to not attempt recalling too many caps at once, leading to instability.
MDS with a large cache (64GB+) should be more stable.
* MDS now provides a config option ``mds_max_caps_per_client`` (default: 1M) to
limit the number of caps a client session may hold. Long running client
sessions with a large number of caps have been a source of instability in the
MDS when all of these caps need to be processed during certain session
events. It is recommended to not unnecessarily increase this value.
* The MDS config ``mds_recall_state_timeout`` has been removed. Late
client recall warnings are now generated based on the number of caps
the MDS has recalled which have not been released. The new configs
``mds_recall_warning_threshold`` (default: 32K) and
``mds_recall_warning_decay_rate`` (default: 60s) sets the threshold
for this warning.
* The Telegraf module for the Manager allows for sending statistics to
an Telegraf Agent over TCP, UDP or a UNIX Socket. Telegraf can then
send the statistics to databases like InfluxDB, ElasticSearch, Graphite
and many more.
* The graylog fields naming the originator of a log event have
changed: the string-form name is now included (e.g., ``"name":
"mgr.foo"``), and the rank-form name is now in a nested section
(e.g., ``"rank": {"type": "mgr", "num": 43243}``).
* If the cluster log is directed at syslog, the entries are now
prefixed by both the string-form name and the rank-form name (e.g.,
``mgr.x mgr.12345 ...`` instead of just ``mgr.12345 ...``).
* The JSON output of the ``ceph osd find`` command has replaced the ``ip``
field with an ``addrs`` section to reflect that OSDs may bind to
multiple addresses.
* CephFS clients without the 's' flag in their authentication capability
string will no longer be able to create/delete snapshots. To allow
``client.foo`` to create/delete snapshots in the ``bar`` directory of
filesystem ``cephfs_a``, use command:
- ``ceph auth caps client.foo mon 'allow r' osd 'allow rw tag cephfs data=cephfs_a' mds 'allow rw, allow rws path=/bar'``
* The ``osd_heartbeat_addr`` option has been removed as it served no
(good) purpose: the OSD should always check heartbeats on both the
public and cluster networks.
* The ``rados`` tool's ``mkpool`` and ``rmpool`` commands have been
removed because they are redundant; please use the ``ceph osd pool
create`` and ``ceph osd pool rm`` commands instead.
* The ``auid`` property for cephx users and RADOS pools has been
removed. This was an undocumented and partially implemented
capability that allowed cephx users to map capabilities to RADOS
pools that they "owned". Because there are no users we have removed
this support. If any cephx capabilities exist in the cluster that
restrict based on auid then they will no longer parse, and the
cluster will report a health warning like::
AUTH_BAD_CAPS 1 auth entities have invalid capabilities
client.bad osd capability parse failed, stopped at 'allow rwx auid 123' of 'allow rwx auid 123'
The capability can be adjusted with the ``ceph auth caps``
command. For example,::
ceph auth caps client.bad osd 'allow rwx pool foo'
* The ``ceph-kvstore-tool`` ``repair`` command has been renamed
``destructive-repair`` since we have discovered it can corrupt an
otherwise healthy rocksdb database. It should be used only as a last-ditch
attempt to recover data from an otherwise corrupted store.
* The default memory utilization for the mons has been increased
somewhat. Rocksdb now uses 512 MB of RAM by default, which should
be sufficient for small to medium-sized clusters; large clusters
should tune this up. Also, the ``mon_osd_cache_size`` has been
increase from 10 OSDMaps to 500, which will translate to an
additional 500 MB to 1 GB of RAM for large clusters, and much less
for small clusters.
* The ``mgr/balancer/max_misplaced`` option has been replaced by a new
global ``target_max_misplaced_ratio`` option that throttles both
balancer activity and automated adjustments to ``pgp_num`` (normally as a
result of ``pg_num`` changes). If you have customized the balancer module
option, you will need to adjust your config to set the new global option
or revert to the default of .05 (5%).
* By default, Ceph no longer issues a health warning when there are
misplaced objects (objects that are fully replicated but not stored
on the intended OSDs). You can reenable the old warning by setting
``mon_warn_on_misplaced`` to ``true``.
* The ``ceph-create-keys`` tool is now obsolete. The monitors
automatically create these keys on their own. For now the script
prints a warning message and exits, but it will be removed in the
next release. Note that ``ceph-create-keys`` would also write the
admin and bootstrap keys to /etc/ceph and /var/lib/ceph, but this
script no longer does that. Any deployment tools that relied on
this behavior should instead make use of the ``ceph auth export
<entity-name>`` command for whichever key(s) they need.
* The ``mon_osd_pool_ec_fast_read`` option has been renamed
``osd_pool_default_ec_fast_read`` to be more consistent with other
``osd_pool_default_*`` options that affect default values for newly
created RADOS pools.
* The ``mon addr`` configuration option is now deprecated. It can
still be used to specify an address for each monitor in the
``ceph.conf`` file, but it only affects cluster creation and
bootstrapping, and it does not support listing multiple addresses
(e.g., both a v2 and v1 protocol address). We strongly recommend
the option be removed and instead a single ``mon host`` option be
specified in the ``[global]`` section to allow daemons and clients
to discover the monitors.
* New command ``ceph fs fail`` has been added to quickly bring down a file
system. This is a single command that unsets the joinable flag on the file
system and brings down all of its ranks.
* The ``cache drop`` admin socket command has been removed. The ``ceph
tell mds.X cache drop`` remains.
Getting Ceph
------------
* Git at git://github.com/ceph/ceph.git
* Tarball at http://download.ceph.com/tarballs/ceph-14.2.0.tar.gz
* For packages, see
http://docs.ceph.com/docs/master/install/get-packages/
* Release git sha1: 3a54b2b6d167d4a2a19e003a705696d4fe619afc
--
Abhishek Lekshmanan
SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton,
HRB 21284 (AG Nürnberg)
Hi all,
just testing if this message makes it to the new list.
Lenz
--
SUSE Linux GmbH - Maxfeldstr. 5 - 90409 Nuernberg (Germany)
GF:Felix Imendörffer,Jane Smithard,Graham Norton,HRB 21284 (AG Nürnberg)
We're glad to announce the fifth bug fix release of Mimic v13.2.X stable
release series. We recommend that all users upgrade.
Notable Changes
---------------
* This release fixes the pg log hard limit bug that was introduced in
13.2.2, https://tracker.ceph.com/issues/36686. A flag called
`pglog_hardlimit` has been introduced, which is off by default. Enabling
this flag will limit the length of the pg log. In order to enable
that, the flag must be set by running `ceph osd set pglog_hardlimit`
after completely upgrading to 13.2.2. Once the cluster has this flag
set, the length of the pg log will be capped by a hard limit. Once set,
this flag *must not* be unset anymore. In luminous, this feature was
introduced in 12.2.11. Users who are running 12.2.11, and want to
continue to use this feature, should upgrade to 13.2.5 or later.
* This release also fixes a CVE on civetweb, CVE-2019-3821 where SSL file
descriptors were not closed in civetweb in case the initial negotiation fails.
* There have been fixes to RGW dynamic and manual resharding, which no longer
leaves behind stale bucket instances to be removed manually. For finding and
cleaning up older instances from a reshard a radosgw-admin command `reshard
stale-instances list` and `reshard stale-instances rm` should do the necessary
cleanup. These commands should *not* be used on a multisite setup as the stale
instances may be unlikely to be from a reshard and can have consequences. In
the next version the admin CLI will prevent this command to be run on a
multisite cluster, however for the current release users are urged not to
use the delete command on a multisite cluster.
For a detailed changelog please refer to the official release blog at
https://ceph.com/releases/v13-2-5-mimic-released/
Getting ceph
* Git at git://github.com/ceph/ceph.git
* Tarball at http://download.ceph.com/tarballs/ceph-13.2.5.tar.gz
* For packages, see http://docs.ceph.com/docs/master/install/get-packages/
* Release git sha1: cbff874f9007f1869bfd3821b7e33b2a6ffd4988
--
Abhishek Lekshmanan
SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton,
HRB 21284 (AG Nürnberg)
